1060 Electrical-Grade Aluminum Busbar

Short Description:

Item Specification
Product 1060 Electrical-Grade Aluminum Busbar
Primary Alloy 1060; the supplied brief specifies Al ≥99.60%. Confirm by batch certificate.
Other Listed Alloys 1050A, 1070, 1350, 6101, and 6063; confirm availability and do not treat as direct equivalents.
Tempers 1060-O, H12/H14, H18, F, and H112 are listed. Confirm by product form and order.
Thickness × Width 1.5–40 mm × 10–300 mm, subject to manufacturing and stock confirmation.
Supply Form Straight lengths listed as 2,000–6,000 mm; continuous coils are also listed.
Example Sizes The supplied brief lists sizes from 3 × 30 mm to 12 × 120 mm. Current stock and sizes should be checked before quoting.
Edge Profile Square, rounded-corner, or full-radius options are listed.
Electrical Conductivity 61.0–62.5% IACS is listed at 20 °C; verify test method and batch result.
Resistivity ≤0.0280 Ω·mm²/m is listed at 20 °C; confirm against the applicable specification.
Density Approximately 2.70 g/cm³ is listed for aluminum.
Tensile Strength 60–135 MPa is listed depending on temper; confirm the selected temper and test report.
Bend Performance A 90° bend without cracking is stated in the supplied brief; confirm test method, temper, and acceptance criteria.
Surface Mill finish with oil film or dry surface is listed.
Optional Finishes Tin, silver, or nickel plating; heat-shrink tubing; or epoxy coating are listed options, subject to order review.
Candidate Standards ASTM B236, B209, B221; IEC 60105; EN 755 / EN 573-3; JIS H4040; GB/T 5585.2 and GB/T 3190 are cited in the supplied brief. Confirm the standard applicable to the exact alloy and product form.

Product Detail

Product Tags

Short Description

1060 electrical-grade aluminum busbar is available in specified cross-sections and lengths for electrical conductor applications. The supplied product information lists straight bars and coil forms, multiple tempers, and optional surface treatments. Confirm alloy, temper, dimensions, conductivity, applicable standard, and finish against the order requirements and batch documentation.

Product Overview

1060 aluminum busbar is a high-purity aluminum conductor used in electrical equipment where conductor weight, cross-section, and conductivity need to be considered together. The product information identifies 1060 as the primary alloy and lists straight lengths, optional coil supply, and custom dimensions.

Available temper and forming options should be selected according to the required flexibility, strength, and fabrication route. Related alloys such as 1050A, 1070, 1350, 6101, and 6063 are separate material options, not automatic substitutes for 1060. Confirm alloy, temper, dimensions, and electrical requirements before ordering.

For related aluminum material options, see Cymber Metal’sAluminum Alloyrange. Company-level inspection information is available on theQuality Assurancepage.

Key Features

Feature Description
1060 alloy option Electrical-grade 1060 is identified as the primary alloy in the supplied product information.
Multiple cross-sections A range of thicknesses and widths is listed; confirm available sizes and tolerances for the order.
Straight bars or coils Supply form can be selected according to application and fabrication requirements.
Temper options Soft, semi-hard, full-hard, and as-extruded conditions are listed; verify availability by size.
Surface treatment options Plating, insulation, and coating options may be specified where required.
Lightweight conductor material Aluminum has a lower density than copper; conductor sizing and system design must account for electrical and thermal requirements.

Manufacturing Process

Stage Scope
Material Review Confirm alloy, temper, standard, dimensions, and electrical requirements.
Melting and Preparation High-purity aluminum feedstock and melt treatment are described in the supplied process information; confirm the actual route for the product.
Continuous Extrusion Conform continuous extrusion is listed as a forming method; verify that it applies to the selected profile and order.
Drawing and Straightening Precision cold drawing and multi-roll straightening are listed options for dimensional control.
Surface Preparation Remove burrs and surface residues as required by the specified finish or subsequent plating.
Optional Finishing Apply plating, heat-shrink tubing, or coating only when specified and technically agreed.
Final Inspection Check dimensions, straightness, surface condition, and specified electrical or mechanical properties against the order requirements.

Manufacturing & Quality Control

Control Stage Review or Inspection
Chemical Composition Optical emission spectroscopy is listed for checking aluminum content; confirm batch records.
Electrical Conductivity Eddy-current or bridge-resistivity testing is listed; confirm test method, coverage, and measured results.
Mechanical Properties Tensile testing is listed; confirm the test requirements for the selected temper.
Bend Testing 90° bend testing is described in the supplied brief; agree on the applicable method and acceptance criteria.
Dimensional Inspection Check thickness, width, length, straightness, and other agreed dimensions.
Surface Inspection Review burrs, surface condition, and any specified coating or plating.
Documentation Material certificates, conductivity reports, and traceability records are listed in the supplied information; confirm availability for the specific order.

For company-level quality information, seeQuality Assurance. Product-specific tests, standards, and acceptance criteria should be agreed before order placement.

Typical Applications

Potential Application Possible Use Requirements to Confirm
Switchgear and ring main units Main or grounding conductor bars System design, current, temperature rise, connections, and applicable standards
Busway systems Conductors for sandwich or air-insulated busways Cross-section, joint design, insulation clearances, and system rating
Transformers Winding or equalizing conductors, where the selected temper is suitable Temper, bend requirements, dimensions, and thermal conditions
EV and energy storage Module connection bars Current, joint design, temperature rise, and enclosure requirements
Renewable energy equipment Conductor bars in inverters or related equipment Electrical load, dimensions, connections, and equipment requirements
Electrolysis plants High-current DC conductor systems Current, thermal management, corrosion environment, and connection design

These are potential application contexts from the supplied product information, not confirmed ratings or approvals. Final suitability should be validated against the equipment design and applicable requirements.

FAQ

What is 1060 electrical-grade aluminum busbar?

It is an aluminum conductor bar made from alloy 1060, which the supplied product information identifies as the primary alloy. Confirm composition, temper, dimensions, and electrical properties against the material certificate and order specification.

What is the difference between 1060-O and 1060-H14?

They are different temper conditions. The supplied information describes O temper as soft and H14 as semi-hard. Select the condition based on forming, strength, and electrical requirements, and confirm availability for the required size.

Is 1060 interchangeable with 1350 or 6101?

No. These are different alloy designations with different composition and property requirements. Any substitution should be reviewed against the electrical, mechanical, and standard requirements of the application.

Can this aluminum busbar be supplied in custom lengths?

The supplied information lists straight lengths and precision sawing. Provide the required length, tolerance, quantity, and cross-section for confirmation.

What conductivity can be expected?

The supplied brief lists a conductivity range of 61.0–62.5% IACS at 20 °C. Confirm the requirement, test method, and batch result before specifying a guaranteed value.

Can the busbar be plated or insulated?

Tin, silver, and nickel plating, heat-shrink tubing, and epoxy coating are listed as options. Specify coverage, thickness, color or material, and acceptance requirements for review.

Which standards does the product meet?

Several standards are referenced in the supplied product brief, but the applicable standard depends on alloy, product form, and order specification. Confirm the required standard and supporting documents for the selected product.

What information is needed for a quotation?

Provide alloy, temper, standard, cross-section, length or coil requirements, quantity, tolerances, finish, application, inspection documents, destination, and target schedule.

Request a Quote

Please Provide Details
Material Alloy, temper, standard, and required conductivity
Dimensions Thickness, width, length, tolerance, and edge profile
Supply Form Straight lengths or coil, including any cutting requirement
Quantity Sample, trial, or production quantity
Surface Mill finish, dry/oiled surface, plating, heat-shrink, or coating
Application Equipment type and operating conditions
Inspection and Documents Required material certificate, conductivity report, and inspection scope
Delivery Destination and target schedule

Send your drawing and requirements throughContact Usfor a material and manufacturing review.


  • Previous:
  • Next:

  • Write your message here and send it to us