1060 Electrical-Grade Aluminum Strip Coil
Video
Short Description
1060 aluminum strip coil is a coiled flat product for applications that require aluminum strip in continuous or cut-to-length form. Alloy, temper, thickness, width, coil dimensions and edge condition should be specified according to the drawing or purchase specification.
Cymber Metal can review aluminum material and processing requirements for custom strip orders. For broader material options, see theAluminum Alloyrange. Final grade, condition, dimensional tolerances and documentation are confirmed for each order.
Product Overview
Custom aluminum strip coils can be supplied for winding, slitting, stamping and other drawing-based applications. The selected alloy and temper affect forming behavior and mechanical properties, so the RFQ should identify the intended process and operating requirements.
The supplied product brief lists AA 1060 as the primary alloy, with possible alternatives including 1050A, 1070, 1350, 3003 and 5052. It also lists O, H14/H24 and H18 tempers, along with cold-rolled strip and thicker continuous-coil forms. These are reference options, not confirmation that every combination is currently available. Confirm the required grade, temper and applicable standard against the order documents.
Key Features
| Feature | Buyer Consideration |
|---|---|
| Coil supply form | Supports applications requiring strip in roll form |
| Alloy and temper choices | Select based on forming, winding and mechanical requirements |
| Slit width options | Width is specified to suit the customer’s process and equipment |
| Edge-condition options | Edge requirements can be stated for winding, handling or downstream processing |
| Coil geometry options | Specify inner diameter, outer diameter, coil weight and winding direction where relevant |
| Drawing-based order review | Confirm material, dimensions, tolerances and inspection requirements before production |
Manufacturing Process
| Stage | Process Description |
|---|---|
| Specification Review | Confirm alloy, temper, thickness, width, coil dimensions, edge requirements and intended use. |
| Material Preparation | Select material and review its identification and documentation against the order specification. |
| Rolling | Cold rolling may be used for strip products where included in the confirmed production route. |
| Slitting | Slit the material to the specified width and review edge condition against the agreed requirements. |
| Annealing | Apply only when the specified temper and approved process require it. |
| Recoiling | Wind the strip to the required coil dimensions and handling configuration. |
| Inspection | Check agreed material, dimensional, surface and coil characteristics. |
| Packing | Protect the coil edges and surfaces and secure the coil for storage or shipment. |
Manufacturing & Quality Control
| Control Stage | Quality Check |
|---|---|
| Order Review | Confirm alloy, temper, product form, dimensions, tolerance, edge condition and application. |
| Material Verification | Check material identification and documents against the agreed specification. |
| Dimensional Inspection | Check thickness and width, plus coil dimensions where specified. |
| Edge and Surface Review | Inspect visible edge condition and surface condition to the agreed criteria. |
| Temper / Mechanical Requirements | Verify only the properties and test methods stated in the purchase specification. |
| Coil Geometry | Review inner diameter, outer diameter, weight, winding and any specified camber or telescoping limits. |
| Documentation | Provide material or inspection documents included in the order requirements. |
| Packing Review | Confirm wrapping, edge protection, coil restraint and shipping orientation as required. |
For inspection methods and available documentation, see ourQuality Assurancepage. Product-specific testing and acceptance criteria should be confirmed before order placement.
Typical Applications
| Application | Potential Use |
|---|---|
| Transformer winding | Aluminum strip for winding designs that specify the selected alloy, temper and dimensions |
| Reactor and electrical coil production | Strip stock for customer-defined winding processes |
| Electrical components | Slit aluminum strip for drawing-specific conductive components |
| Stamped parts | Coil-fed strip for automated stamping, subject to material and temper suitability |
| Flexible connector assemblies | Aluminum strip or layered strip components where the design specifies them |
| Cable and shielding products | Strip material for customer-defined wrapping or shielding constructions |
| Heat-transfer components | Aluminum strip for fin or other formed components, subject to the product specification |
Application suitability depends on alloy, temper, dimensions, forming method and operating conditions. Confirm electrical and mechanical requirements with the equipment design before selecting material.
Frequently Asked Questions
An aluminum strip coil is flat aluminum material supplied in a wound coil. Buyers commonly specify the alloy, temper, thickness, width, coil dimensions and edge condition based on their winding, stamping or forming process.
The supplied product brief identifies AA 1060 as the primary alloy. The grade for a specific order should be confirmed by the purchase specification and material certificate. The photos show coiled metal but cannot independently verify the alloy.
The supplied brief lists O, H14/H24 and H18 tempers. The correct temper depends on forming and strength requirements. Please state the required temper or share the downstream process so the material can be reviewed.
The supplied brief lists cold-rolled strip thicknesses of 0.15–4.0 mm, narrow widths of 10–200 mm and wide strip/foil widths of 200–1600 mm. These are reference ranges and should be confirmed for the requested alloy, temper and order quantity.
Edge condition can be specified in the RFQ, including precision slit or conditioned edges where available. State the edge type and any measurable acceptance limit required for winding or downstream processing; do not assume a particular burr limit without agreement.
The supplied brief identifies transformer winding as a target application. The buyer should provide the winding design requirements, alloy, temper, thickness, width, coil ID and applicable standard so material suitability can be reviewed.
Please provide alloy and temper, thickness, width, coil ID/OD, target coil weight, edge condition, quantity, tolerance, application, inspection documents, destination and requested delivery schedule.
Conductivity and edge limits should be stated in the purchase specification with the required test method and acceptance criteria. The supplied photos do not verify these properties, so specific values or “zero burr” claims should only be published when supported by product-specific inspection records.
Request a Quote
| Information | Details to Provide |
|---|---|
| Alloy and Standard | AA 1060 or other grade, plus the required standard |
| Temper | O, H14/H24, H18 or customer-defined condition |
| Dimensions | Thickness, width, coil ID/OD and any dimensional tolerances |
| Coil Requirements | Target weight, winding direction, camber or telescoping limits |
| Edge Condition | Slit, rounded, chamfered or other specified edge |
| Application | Transformer winding, stamping, electrical component or other use |
| Quantity | Order quantity, annual demand and sample requirements |
| Inspection | Required tests, acceptance criteria and documents |
| Delivery | Destination, packing requirements and requested schedule |
Send the drawing or specification throughContact Cymber Metalfor a material and processing review.












