CNC-Turned Stepped Copper Threaded Cup Terminal

Short Description:

Item Specification / Enquiry Reference
Product CNC-turned stepped copper threaded cup terminal
Product Form Custom machined conductive sleeve, cup or adapter
Main Geometry Stepped cylindrical body with upper neck, threaded features and deep internal cavity
Material Options C11000 ETP copper,C10200 oxygen-free copperor C10100 oxygen-free electronic copper
Alternative Materials C14500 tellurium copper, C10400/C10700 silver-bearing copper or C18150 CuCrZr may be reviewed separately
Raw Material Standard ASTM B187/B187M or another agreed specification suitable for the selected raw-material form
Large-Body OD Approximately 8–150 mm, subject to drawing review
Reduced-Neck OD Approximately 4–90 mm, subject to drawing review
Overall Length Approximately 12–260 mm, subject to drawing review
Top Internal Thread Approximately M3–M42 for feasibility review
Lower External Thread Fine-pitch or other specified thread form according to the mating component
Internal Cavity Deep-bored cavity with drawing-defined diameter, depth and wall thickness
Wall Thickness Approximately 0.6–1.5 mm may be reviewed for selected designs; minimum wall must be confirmed by stress and machining review
Internal Shoulder Annular locating shoulder or step according to the approved drawing
Central Opening Plain or threaded opening according to the connection design
Diameter Tolerance An enquiry target of ±0.01–0.025 mm may be reviewed on selected features
Coaxiality A 0.015–0.025 mm target may be reviewed with defined datums and inspection method
Wall Thickness Uniformity A 0.02 mm target may be reviewed for suitable sizes and geometry
Roundness Confirmed by drawing and inspection plan
Surface Roughness Ra 0.2–0.4 μm target on selected internal or external surfaces
Hardness 85–130 HV may be specified as an enquiry target; grade and condition dependent
Electrical Conductivity A minimum of 98% IACS may be reviewed for suitable pure-copper grades and conditions
Surface Finish Bare copper, anti-tarnish treatment, nickel plating, silver plating, tin plating, gold or other specified finish
Silver Plating Approximately 5–30 μm may be reviewed where appropriate
Thread Standards ISO 965, ASME B1.1 or another specified thread system, subject to drawing confirmation
Documentation Material certificates, dimensional reports and additional inspection documents according to order requirements
Supply Basis Approved drawing, material specification and confirmed inspection plan

Product Detail

Product Tags

Video

Short Description

This CNC-turned stepped copper threaded cup terminal features a reduced upper neck, a top internal thread, a larger cylindrical body and a lower threaded section. The opposite end includes a deep-bored cavity with an internal shoulder and a central opening.

The component can be reviewed for use as a custom electrode holder, conductive sleeve, nozzle-support component or threaded copper adapter. Potential material options include C11000 ETP copper, C10200 oxygen-free copper and C10100 oxygen-free electronic copper.

Thread size, cavity depth, wall thickness, shoulder position, surface finish, coating and dimensional tolerances are confirmed according to the customer drawing and mating assembly.

Stepped Copper Threaded Cup Terminal Overview

A stepped copper threaded cup terminal is a turned conductive component with different cylindrical diameters and threaded interfaces along a common axis. This design can provide a compact connection between an upper threaded component and a lower threaded or socketed assembly.

The photographed component includes:

  • A smaller upper cylindrical neck
  • A visible internal thread at the top
  • A larger stepped body
  • A lower external threaded section
  • A deep internal cavity
  • An internal locating shoulder
  • A central opening visible from the cavity side

The component may be manufactured from suitablepure copper materialsand machined to the required thread, bore and shoulder geometry. The actual function depends on the mating electrode, torch body, nozzle, switchgear component or other assembly.

This product should not be treated as a universally qualified plasma electrode holder, water-cooled part or high-voltage component based only on appearance. Operating conditions and interface requirements must be reviewed before production.

Key Features

Feature Design Value
Stepped Cylindrical Form Provides different diameters for locating, clearance or connection within a compact assembly
Upper Internal Thread Allows connection to a compatible stud, electrode or threaded component
Lower External Thread Provides a screw-in interface when matched with the mating component
Deep-Bored Cavity Creates an internal socket or clearance space for a drawing-defined assembly
Internal Locating Shoulder Can provide an axial stop or positioning surface when correctly matched
Coaxial Feature Arrangement Keeps the upper thread, body, cavity and lower thread on a common axis where specified
Solid Copper Starting Blank Allows a machined one-piece component without a brazed joint between the major sections
Custom Surface Treatment Allows the finish to be selected for conductivity, oxidation resistance, wear or mating requirements
Compact Adapter Geometry Supports custom conductive interfaces where multiple diameters and threads are required

Manufacturing & Quality Control

The process route is established after reviewing the approved drawing, copper grade, wall thickness and thread requirements. Cymber Metal can supportcustom fine machiningreview for turning, boring, threading, deburring and finishing.

Manufacturing Process

Stage Process Focus Drawing / Order Requirements
Engineering Review Confirm thread interfaces, internal cavity, shoulder and wall thickness Provide 2D drawing, 3D model, mating parts and critical datums
Material Selection Select the copper grade and material condition Confirm conductivity, hardness, machinability and applicable standard
Blank Preparation Prepare a suitable round copper blank Allow sufficient machining stock and identify the material batch
External Turning Machine the main body, reduced neck and stepped diameters Control OD, length, shoulder position and transition geometry
Internal Boring Produce the deep cavity, internal shoulder and central opening Confirm bore diameter, depth, wall thickness and internal edge condition
Thread Machining Produce the upper internal thread and lower external thread Confirm thread size, pitch, class, engagement, relief and runout
Fine Finishing Deburr thread flanks and finish functional surfaces Prevent burrs from interfering with assembly or coolant flow
Surface Treatment Apply plating or anti-tarnish treatment where required Define coating thickness, masking, dimensional allowance and coverage
Cleaning Remove chips, oil and machining residues Pay attention to deep cavity and threaded regions
Packaging Protect threads, bore and finished surfaces Prevent impact, contamination and oxidation during handling

The process may use supported internal tooling, suitable workholding or a second operation where necessary. “Single setup” should only be stated when confirmed for the specific geometry.

Optional copper surface treatments can be reviewed through thebusbar plating and copper finishing service.

Quality Control

Inspection Item Suggested Method Acceptance Basis
Material Identity Material certificate review and additional testing when specified Agreed copper grade and raw-material specification
Oxygen-Related Requirements Appropriate certificate or analytical test method Applicable requirements for C10100 or C10200; ordinary XRF alone does not prove low oxygen content
External Dimensions Micrometers, gauges and coordinate measurement where appropriate Approved drawing and defined datums
Internal Bore Bore gauges, calibrated pins or coordinate measurement Cavity diameter, depth, shoulder location and central opening
Thread Inspection Calibrated thread plug and ring gauges Agreed thread size, pitch, class and functional engagement
Coaxiality CMM or suitable rotational inspection method Defined relationship between top thread, bore and lower thread
Wall Thickness Ultrasonic, calibrated measurement or section inspection where appropriate Drawing-defined minimum and uniformity requirement
Surface Roughness Profilometer measurement Agreed Ra value and measurement location
Conductivity Suitable conductivity test method Agreed grade, test temperature and acceptance value
Hardness Microhardness or suitable hardness test Agreed material condition and hardness range
Plating Coating-thickness and surface-coverage inspection Agreed coating type, thickness, masking and acceptance criteria
Leak or Pressure Testing Only when specified for the actual application Agreed test pressure, medium, duration and acceptance criteria
Additional NDT Suitable method when required Agreed scope, sampling and acceptance criteria
Final Documentation Material and dimensional records Purchase-order and inspection-plan requirements

Leak testing, pressure testing or non-destructive testing should not be assumed for every order. The method must match the actual application and be agreed before production. See theQuality Assurancepage for the general quality framework.

Typical Applications

These are potential application areas. Final suitability must be confirmed against the equipment drawing, operating conditions and qualification requirements.

Application Typical Use Design Considerations
Plasma Torch Components Threaded conductive holder, electrode support or nozzle-related adapter Thread engagement, heat input, electrode retention, cooling arrangement and service temperature
Laser Cutting and Welding Heads Compact copper threaded connector or conductive sleeve Thermal cycling, fit, surface treatment, cooling path and electrical isolation
Water-Cooled Electrode Assemblies Threaded conductive interface in a cooled assembly Pressure, sealing method, wall thickness, coolant compatibility and leak-test requirements
Vacuum Circuit Breaker Components Coaxial conductive sleeve or threaded adapter Contact geometry, current duty, temperature rise, insulation clearance and mechanical loading
Gas-Insulated Switchgear Machined conductive sleeve or interface component Gas environment, dimensional stability, contact pressure and equipment qualification
RF Plasma Chambers Conductive sleeve or electrode interface Frequency, thermal duty, vacuum compatibility, surface condition and contamination control
Custom Power Equipment Stepped copper connector with multiple locating diameters Assembly access, fastening method, current path and required inspection documents

FAQ

What is a stepped copper threaded cup terminal?

It is a machined copper component with stepped cylindrical diameters, one or more threaded interfaces and an internal cavity. The design can serve as a conductive sleeve, electrode holder, nozzle-related adapter or custom threaded connector, depending on the mating assembly.

Does the product have both internal and external threads?

The photographs show an internal thread at the upper end and an external threaded section around the lower body. Final thread size, pitch, class and engagement must be confirmed from the drawing.

Can the internal cavity and shoulder be customized?

Yes. Cavity diameter, depth, wall thickness, internal shoulder position and central opening can be designed for the mating component. Minimum wall thickness must be checked against machining feasibility, loading and any pressure requirement.

Which copper grades are available?

C11000 ETP copper, C10200 oxygen-free copper and C10100 oxygen-free electronic copper can be considered. C14500, C10400/C10700 or C18150 may be reviewed for special requirements, but their conductivity and mechanical properties must be assessed separately.

Can this part be used as a water-cooled electrode holder?

It may be considered for a water-cooled assembly if the drawing defines the coolant path, sealing method, pressure, temperature and inspection requirements. The product photos alone cannot establish pressure resistance or leak-free performance.

What tolerances can be achieved?

Selected diameters, threads, bores and coaxial features can be reviewed for tight tolerances. Feasibility depends on size, wall thickness, material condition, workholding and the selected inspection method. Final tolerances must be confirmed by engineering review.

Can the copper cup be plated?

Yes, silver, tin, nickel, anti-tarnish and other specified finishes can be reviewed. Coating thickness, coverage, masking and dimensional allowance should be included in the drawing, especially for threads and internal bores.

Does Cymber Metal provide inspection documents?

Material certificates, dimensional reports and additional inspection documents can be discussed according to the product and order requirements. Conductivity, hardness, plating, leak testing and third-party inspection should be listed specifically in the purchase specification.

Request a Quote

Required Information Details to Provide
Drawing Dimensioned 2D drawing and STEP or 3D model if available
Material Copper grade, standard, condition and permitted alternatives
Main Dimensions Large OD, neck OD, overall length and step locations
Internal Geometry Bore diameter, cavity depth, shoulder position, central opening and minimum wall thickness
Thread Details Internal and external thread size, pitch, class, engagement and relief
Application Plasma torch, laser head, switchgear, RF chamber or other equipment
Operating Conditions Current, voltage, temperature, pressure, vibration, cooling medium and duty cycle
Surface Treatment Bare copper, silver, nickel, tin, anti-tarnish or other finish
Inspection Conductivity, hardness, dimensional report, thread gauges, leak test or third-party inspection
Quantity Prototype, sample, batch quantity and expected annual demand
Delivery Destination, packaging requirements and requested delivery schedule

Send your drawing to Cymber Metal for a custom copper threaded terminal quotation. Include the mating parts and operating conditions so the thread, bore, material and inspection route can be reviewed together.


  • Previous:
  • Next:

  • Write your message here and send it to us