Copper Saddle Terminal with Flat Connection Tang
Video
Short Description
This copper saddle terminal combines a concave saddle base, a cylindrical neck and a rounded flat connection tang. The geometry provides a drawing-defined transition between a round conductor interface and a flat bolted connection.
Cymber Metal supports material selection and custom machining review in C11000 electrolytic tough-pitch copper, C10200 oxygen-free copper and C10100 oxygen-free electronic copper. Saddle radius, base-hole arrangement, tang dimensions and surface treatment can be specified to suit the mating assembly.
Potential uses include switchgear conductor connections, tubular busbar branches and custom power-distribution assemblies. Final suitability depends on the approved fastening arrangement, contact conditions, electrical duty and mechanical requirements.
Copper Saddle Terminal Overview
A copper saddle terminal is a conductive transition component with a concave base shaped to interface with a cylindrical conductor. Its upper tang provides a separate flat connection point for a branch conductor, busbar or suitable flexible connector.
The illustrated design features a wide saddle base with two holes, a cylindrical neck and an upper rounded tang with one through-hole. The underside contains a curved recess intended to match a drawing-defined round interface.
The saddle component is not a complete clamp by itself. A mating clamp member, fasteners or another approved retention arrangement must establish the required contact pressure and mechanical restraint.
Suitablepure copper materialscan be reviewed alongside the connection geometry. Actual contact performance depends on saddle fit, conductor dimensions, surface condition, coating, bolt preload and operating temperature, rather than nominal contact area alone.
Key Features
| Feature | Design Value |
|---|---|
| Concave Saddle Interface | Provides a curved mating surface for a specified round conductor |
| Dual-Hole Base | Provides two fastening locations for a drawing-defined retention arrangement |
| Cylindrical Neck | Connects the saddle base to the upper tang within the specified assembly envelope |
| Flat Upper Tang | Provides a bolted interface for a compatible flat conductor or connector |
| Custom Interface Geometry | Allows saddle radius, tang offset, hole spacing and shoulder geometry to be reviewed together |
| One-Piece Construction Option | Can avoid an added joint between the base, neck and tang when machined from one suitable blank |
| Selectable Copper Grade | Allows conductivity, hardness, machining and service requirements to be balanced |
| Optional Surface Treatment | Allows coating coverage and contact-surface requirements to be specified for the mating assembly |
Manufacturing & Quality Control
The manufacturing route is established from the approved drawing, material condition and inspection requirements. Cymber Metal’scustom copper machining supportprovides a starting point for reviewing the saddle, neck, tang and fastening features.
Manufacturing Process
| Stage | Process Focus | Drawing / Order Requirements |
|---|---|---|
| Engineering Review | Review conductor interface, tang position and fastening arrangement | Confirm datums, loads, mating dimensions and critical contact surfaces |
| Material Selection | Select a suitable copper grade, condition and blank | Confirm material specification, conductivity and hardness requirements |
| Blank Preparation | Prepare machining stock and establish reference surfaces | Identify the relevant material batch and allow sufficient finishing stock |
| Body Machining | Produce the cylindrical neck, base outline and upper tang | Follow drawing-defined dimensions, offsets, shoulders and edge geometry |
| Saddle Machining | Machine the concave cylindrical recess | Control radius, depth, width and orientation relative to the specified datums |
| Drilling and Threading | Produce the upper tang hole and two base holes | Confirm hole positions, thread class, engagement and edge distances |
| Deburring and Finishing | Remove burrs and finish designated contact surfaces | Preserve functional edges and avoid damage to the saddle and tang |
| Surface Treatment | Apply the specified finish where required | Define coating thickness, masking, thread protection and dimensional allowance |
| Cleaning and Packaging | Clean and protect finished components | Prevent impact damage, contamination and abrasion during transport |
Fixture strategy and machining sequence are selected to achieve the approved requirements. Single-setup or five-axis machining is not assumed for every design.
Optional finishes can be reviewed through thecopper plating services, with particular attention to the saddle contact surface, tang face and threaded features.
Quality Control
| Inspection Item | Suggested Method | Acceptance Basis |
|---|---|---|
| Material Identity | Material certificate review and additional testing where specified | Agreed copper grade and raw-material specification |
| Oxygen-Free Requirements | Appropriate material documentation or suitable analytical testing | Applicable oxygen-free grade requirements; ordinary XRF alone does not establish low oxygen content |
| Overall Dimensions | Suitable dimensional gauges and coordinate measurement where appropriate | Approved drawing and defined datums |
| Saddle Profile | Profile measurement, coordinate inspection or an agreed checking fixture | Specified radius, depth, width and profile requirements |
| Mating Fit | Agreed master conductor, contact-pattern check or assembly trial | Defined fit criteria; nominally matching radii do not guarantee complete surface contact |
| Hole Pattern and Threads | Positional measurement and thread gauges where applicable | Hole spacing, thread class, engagement and orientation requirements |
| Contact Surface Finish | Roughness measurement and visual inspection | Specified Ra limit and surface acceptance criteria |
| Conductivity and Hardness | Suitable conductivity and hardness testing | Agreed material condition, test method and property limits |
| Plating Quality | Coating-thickness measurement and additional tests where required | Agreed coating specification, coverage and acceptance limits |
| Additional Inspection | Third-party inspection or suitable non-destructive testing when specified | Agreed method, coverage, sampling and acceptance criteria |
| Final Documentation | Review material and inspection records | Purchase-order documentation and traceability requirements |
Inspection frequency, sampling and reporting are agreed before production. Further information is available on theQuality Assurancepage.
Typical Applications
These are potential application contexts, subject to drawing review and equipment-level validation.
| Application | Typical Use | Design Considerations |
|---|---|---|
| Tubular Busbar Branch Connections | Transition from a round main conductor to a flat branch connection | Tube wall thickness, saddle fit, clamping pressure, temperature rise and short-circuit forces |
| Switchgear Conductor Assemblies | Drawing-defined connection between cylindrical and flat conductors | Interface orientation, fastening access, electrical clearances and mechanical restraint |
| Vacuum Circuit Breaker Assemblies | External conductive transition or shunt connection where specified | Moving or stationary duty, flexible-connector loads, alignment and temperature rise |
| Disconnector and Earthing-Switch Assemblies | Custom conductive saddle connection | Operating forces, contact pressure, fastening retention and equipment qualification |
| Industrial Power Equipment | Round-conductor branch terminal for rectifier or induction-equipment assemblies | Current frequency, thermal duty, cooling arrangement and vibration |
| Water-Cooled Conductor Assemblies | External connection to an appropriately designed round conductor or tube | Avoid tube crushing or leakage; confirm wall strength, coolant compatibility and electrical duty |
FAQ
It is a conductive transition component with a concave base for a round conductor and a separate connection interface, such as a flat tang. The illustrated design includes a cylindrical neck, a two-hole base and a single-hole upper tang.
Not by itself. The saddle component requires a compatible retention arrangement, which may include a mating clamp member and fasteners. The full assembly must establish adequate contact pressure and mechanical restraint without overstressing the conductor.
Yes, these features can be reviewed against the drawing. Specify conductor diameter and tolerance, saddle width and depth, hole spacing, fastener size and tang orientation. For tubular conductors, include wall thickness and allowable clamping loads.
No. Contact depends on profile accuracy, conductor ovality, surface condition, coating and the fastening arrangement. A nominal radius match does not prove zero-gap contact. Where fit is critical, define an agreed checking method and acceptance criterion.
C11000 ETP copper, C10200 oxygen-free copper and C10100 oxygen-free electronic copper are potential options. Selection depends on conductivity, material condition and service requirements. Copper-alloy alternatives require separate assessment and do not automatically meet the same conductivity target.
One-piece machining from a suitable copper blank can be reviewed where the geometry permits. This can avoid an added joint between the saddle, neck and tang. It does not establish continuous grain flow, unlimited fatigue life or freedom from fracture.
These finishes can be reviewed according to the mating materials and operating conditions. Specify coating thickness, coverage, masking and required testing. Coating allowance must be included when defining saddle fit, hole dimensions and threaded features.
No universal current or voltage rating can be assigned from the photographs or dimensions alone. Suitability depends on the complete assembly, contact resistance, temperature rise, insulation clearances, short-circuit duty and applicable equipment tests. Provide those requirements with the enquiry.
Request a Quote
| Required Information | Details to Provide |
|---|---|
| Drawing | Dimensioned 2D drawing and, where available, a STEP model |
| Material | Copper grade, standard, condition and permitted substitutions |
| Mating Conductor | Diameter, tolerance, solid or tubular construction, and tube wall thickness where applicable |
| Saddle Geometry | Radius, width, depth, contact length and orientation |
| Tang and Neck | Tang width, thickness, offset, hole size, neck diameter and overall height |
| Fastening Arrangement | Base-hole specification, clamp details, fastener grade, engagement and installation requirements |
| Critical Properties | Conductivity, hardness, roughness, datums and geometric tolerances |
| Operating Conditions | Current duty, frequency, temperature, mechanical loading, vibration and environment |
| Surface Treatment | Finish, coating thickness, coverage, masking and contact-surface requirements |
| Quantity and Documents | Prototype and production quantities, material certificates and inspection requirements |
| Delivery | Destination, packaging needs and requested schedule |
Send your drawing to Cymber Metal for a copper saddle terminal quotation. Include the mating conductor and clamp arrangement so the complete interface can be reviewed.










