Custom Right-Angle Copper Terminal Block with Domed Flange

Short Description:

Parameter Specification / Customization Basis
Product Type Right-angle copper terminal block / busbar mounting bracket
Configuration L-shaped body with upright flange and perpendicular base
Material Pure copper; exact grade and temper to be specified
Upright Flange Domed or rounded upper profile with center bore and surrounding hole pattern
Base Rectangular mounting face with specified bore and hole pattern
Side Features Gussets, cheeks or seating features as defined by drawing
Center Bore Diameter, fit, depth and position according to mating interface
Smaller Holes Tapped or clearance configuration, size, pitch and position per drawing
Mounting Faces Perpendicularity, flatness and contact area requirements per drawing
Overall Dimensions Length, width, height and section thickness to be specified
Surface Finish Bare copper or specified finish
Optional Coating Silver, tin or nickel plating subject to application and process review
Electrical Requirements Material and conductivity requirements defined by the equipment specification
Inspection Requirements Critical dimensions and acceptance criteria agreed before production

Product Detail

Product Tags

Video

Short Description

Custom right-angle copper terminal block with a domed upright flange, center bore, surrounding hole pattern and perpendicular base. The part can be configured with specified mounting holes, tapped features, seating geometry and side gussets for an electrical assembly. Copper grade, dimensions, interfaces and inspection criteria are defined by the approved drawing.

Product Overview

This L-shaped copper terminal block combines an upright domed flange with a perpendicular rectangular base. The flange shown has a large center bore and multiple smaller holes; the base and side features provide additional mounting and seating geometry. Hole types and their functions should be identified on the drawing rather than inferred from appearance alone.

The geometry can be considered for switchgear, circuit-breaker and busbar assemblies where a compact right-angle conductive connection or support is required. Final suitability depends on the equipment design, mating parts, electrical duty and mechanical loads. Cymber Metal’sPure Copperrange is a starting point for discussing copper material options; the grade and temper should be specified for the application.

Key Features

Feature Practical Value
Right-Angle Configuration Provides two perpendicular mounting or connection directions.
Domed Upright Flange Offers a rounded upper profile around the flange and center bore.
Center Bore Accommodates a specified connection, locating or mounting interface.
Multi-Hole Pattern Allows additional fastening or assembly positions as defined by the drawing.
Rectangular Base Provides a second mounting face perpendicular to the upright flange.
Side Support Geometry Gussets or cheeks can support positioning and stiffness where required by the design.
Drawing-Based Machining Allows hole type, spacing, contact faces and critical datums to match mating components.

Manufacturing Process

The production route should be selected after reviewing the material, section thickness, hole pattern and required tolerances. A suitable copper blank may be machined to form the upright flange, base, center bore and mounting features.

Stage Process Scope
1. Drawing Review Confirm overall geometry, hole types, mating interfaces and critical datums.
2. Material Selection Specify copper grade, temper and required documentation.
3. Blank Preparation Select and prepare a suitable copper blank or formed section for the part geometry.
4. Profile Machining Machine the L-shaped envelope, domed flange and base faces.
5. Bore and Hole Machining Produce the center bore and specified tapped or clearance holes.
6. Pocket and Gusset Features Machine seating surfaces and side support features where required.
7. Deburring and Cleaning Remove burrs and clean machined surfaces according to the agreed requirements.
8. Optional Surface Treatment Apply the specified coating and masking requirements if required.
9. Final Inspection Check agreed dimensions, hole positions, faces and surface condition.

Cymber Metal’sFine Machiningservice can be used to review drawing-based machining requirements. If plating is required, specify the coating type, thickness and coverage for review with theBusbar Plating Shop.

Manufacturing & Quality Control

Control Area Inspection / Verification Scope
Material Verify the specified copper grade and temper against purchasing documents.
Overall Dimensions Inspect the length, width, height and section thickness.
Orthogonal Faces Check the relationship between the upright flange and base according to drawing datums.
Center Bore Verify diameter, depth, fit and position as specified.
Hole Pattern Check hole count, hole type, size, pitch and positional requirements.
Contact and Seating Faces Inspect flatness and surface condition where these are critical characteristics.
Gussets and Pockets Check the specified profile and seating geometry.
Surface Condition Check for burrs, handling damage and unacceptable machining marks.
Optional Plating Verify coating coverage and dimensions according to the agreed finish specification.
Documentation Provide material and inspection records as required by the purchase specification.

Inspection methods and acceptance criteria should be agreed before production. SeeQuality Assurancefor Cymber Metal’s quality-control approach.

Typical Applications

These are potential applications based on the product geometry. Final suitability depends on the equipment design and validation requirements.

Application Potential Role Design Considerations
Switchgear Assemblies Right-angle busbar connection or mounting block Current duty, clearances, contact area and fastening arrangement
Vacuum Circuit-Breaker Poles Terminal or support block Pole interface, mechanical loads and equipment-specific validation
Gas-Insulated Switchgear Orthogonal conductive connection or support Assembly layout, clearances and any separately specified sealing requirements
Ring Main Units Compact right-angle busbar connection Mounting envelope, hole pattern and service conditions
Generator or Air Circuit Breakers Heavy conductive terminal or support Temperature rise, current duty and mechanical loading
Insulator-Mounted Assemblies Multi-direction connection base Insulator interface, fastening and alignment

Frequently Asked Questions

What is a right-angle copper terminal block?

It is a copper connection or support component with two perpendicular mounting faces. This design has a domed upright flange with a center bore and smaller holes, together with a rectangular base. The exact electrical and mechanical function depends on the mating parts and equipment drawing.

Are all the smaller holes threaded?

The photos show threaded-looking holes, but they do not establish the specification for every hole. The drawing should identify which holes are tapped, their thread standard and size, and which are clearance holes. It should also define the hole positions relative to the mounting and contact faces.

What is the center bore used for?

The center bore may serve as a connection, locating or mounting feature depending on the assembly. Its diameter, fit, depth and relationship to the smaller holes should be specified alongside the mating component details.

Can the bracket be made as one piece?

A one-piece configuration can be specified for review. Feasibility depends on the material, part envelope and machining route. If a monoblock construction is required, state that requirement on the drawing and identify any features that must not contain joints.

Which copper grade should be specified?

Choose the grade and temper according to conductivity, mechanical requirements, manufacturing needs and service conditions. Include the governing material standard in the RFQ. Similar grade names from different standards should not be assumed to be interchangeable.

Can the part be silver-plated or tin-plated?

A specified coating can be reviewed. State the coating type, thickness, plated surfaces and any masking requirements. The design should account for coating buildup at holes and mating interfaces.

Is the domed flange designed for high-voltage service?

The rounded profile alone does not establish high-voltage performance or prevent electrical discharge. Suitability depends on the complete equipment design, clearances, insulation system and validation tests.

What information is needed for a quotation?

Provide a dimensioned drawing, copper grade and temper, quantity, hole and thread details, critical tolerances, surface finish and inspection-document requirements. Application details and mating-part information help clarify the connection and mounting requirements.

RFQ Information

Required Information Details to Provide
Drawing Dimensioned PDF and STEP or another suitable 3D format
Material Copper grade, standard, temper and required documentation
Quantity Prototype quantity, order quantity and expected annual demand
Overall Dimensions Length, width, height and section thickness
Hole Details Center bore, hole count, hole types, sizes, threads and spacing
Mounting Interfaces Contact faces, seating surfaces and mating-component details
Critical Tolerances Face perpendicularity, flatness and hole-position requirements
Surface Finish Bare copper or specified coating, thickness and coverage
Quality Documents Required material records, inspection reports and additional testing
Application Equipment type, current duty, mechanical loads and service conditions
Delivery Destination, packaging requirements and target schedule

Send the drawing and requirements throughContact Usfor material and manufacturing review.


  • Previous:
  • Next:

  • Write your message here and send it to us