Custom Split-Bent Copper Clevis Contact Bracket with Multi-Plane Hole Pattern
Video
Short Description
Custom copper clevis contact bracket with a multi-hole backplate, a longitudinal slot through the bend zone and parallel fork-shaped ears with mounting holes. The three-dimensional geometry, hole pattern and material can be specified for switchgear, disconnector or other electrical assemblies. Final dimensions and interfaces are defined by the approved drawing.
Product Overview
This copper clevis contact bracket combines a multi-hole backplate with parallel U-shaped ears, creating a three-dimensional mounting and connection component. The photos show large and small holes on the backplate, through-holes in the ears and a narrow slot along the bend area. Hole functions and mating interfaces should be defined on the drawing.
The product brief describes a split-bent, one-piece construction. The exact blank design, forming sequence and any required machining should be confirmed during drawing review. Material grade and temper should be selected for the required conductivity, forming characteristics and service conditions. Cymber Metal’sPure Copperrange is a starting point for material discussions.
Key Features
| Feature | Practical Value |
|---|---|
| Three-Dimensional Clevis Form | Combines a mounting backplate with parallel fork-shaped ears. |
| Multi-Hole Backplate | Provides several mounting or connection points as defined by the assembly design. |
| Slotted Bend Zone | The center slot is a design feature whose width and purpose should be specified by drawing. |
| Parallel Clevis Ears | Allow a specified pivot or clamping interface to be incorporated. |
| Post-Forming Hole Alignment | Hole position and alignment can be controlled against the formed geometry. |
| One-Piece Design Option | The brief describes a split-bent design from a single copper blank; confirm the construction requirement for the order. |
| Drawing-Based Customization | Hole pattern, formed geometry, material and surface finish can be set to match mating components. |
Manufacturing Process
The manufacturing route should be finalized after reviewing the copper grade, blank geometry, slot design and bend sequence. For a split-bent design, hole locations and formed dimensions need to be considered together.
| Stage | Process Scope |
|---|---|
| 1. Drawing Review | Confirm geometry, hole functions, slot details, datums and mating interfaces. |
| 2. Material Selection | Specify copper grade, temper and documentation requirements. |
| 3. Blank Preparation | Prepare the copper blank and cut the required outline and slot features. |
| 4. Controlled Forming | Evaluate a suitable forming sequence for the specified bends and clevis shape. |
| 5. Post-Forming Machining | Machine or finish holes and interfaces where required by the drawing. |
| 6. Deburring and Cleaning | Remove burrs and clean formed and machined surfaces as specified. |
| 7. Optional Surface Treatment | Apply the specified coating and masking requirements if required. |
| 8. Final Inspection | Check agreed dimensions, hole locations, ear alignment and surface condition. |
Drawing-based hole patterns and formed interfaces can be reviewed through Cymber Metal’sFine Machiningservice. If plating is required, specify the coating type, thickness and coverage for review with theBusbar Plating Shop.
Manufacturing & Quality Control
| Control Area | Inspection / Verification Scope |
|---|---|
| Material | Verify the specified copper grade and temper against purchasing documents. |
| Blank and Slot | Check slot position, length, width and root geometry where specified. |
| Formed Geometry | Inspect bend angles, formed profile and backplate-to-ear relationship. |
| Backplate Hole Pattern | Verify hole count, size, type, spacing and position. |
| Clevis Ear Holes | Check hole size, spacing and alignment across the two ears. |
| Clevis Opening | Measure the inner opening and parallelism according to drawing datums. |
| Mounting Faces | Inspect flatness and surface condition where identified as critical. |
| Bend Zones | Visually inspect formed areas for surface damage; additional testing can be specified if required. |
| Optional Plating | Verify coverage and dimensions according to the agreed finish specification. |
| Documentation | Provide material and inspection records as required by the purchase specification. |
Inspection methods and acceptance criteria should be agreed before production. SeeQuality Assurancefor Cymber Metal’s quality-control approach.
Typical Applications
These are potential applications based on the bracket geometry and product brief. Final suitability depends on the equipment design and validation requirements.
| Application | Potential Role | Design Considerations |
|---|---|---|
| Disconnector Assemblies | Pivot or hinge contact bracket for a moving blade | Pivot fit, operating motion, contact surfaces and mechanical loads |
| Switchgear Busbar Assemblies | Multi-plane conductor support or transition terminal | Current duty, mounting layout, clearances and connection method |
| Earthing-Switch Assemblies | Clevis-style connection or support component | Operating loads, alignment and equipment interfaces |
| Air Circuit Breakers | Three-dimensional busbar transition or terminal support | Hole pattern, current duty and fastening arrangement |
| Vacuum Circuit-Breaker Assemblies | Custom conductor bracket or connection support | Pole interface, mechanical loading and validation requirements |
| Rectifier and Energy-Storage Equipment | Multi-direction copper connection component | Thermal conditions, assembly envelope and service requirements |
Frequently Asked Questions
It is a copper component with fork-shaped ears designed to accept a specified pivot, pin or clamped connection. This design also includes a multi-hole backplate and a slot through the bend area. The exact function depends on the equipment drawing and mating parts.
The product brief identifies the slot as a flexure kerf, but its function and required dimensions should be confirmed by the designer. Specify its width, length, root shape and location, as these details affect forming, stiffness and the remaining conductive section.
The brief describes a one-piece split-bent configuration. The production drawing or order specification should state whether a single blank and no welded joints are required. If another construction route is acceptable, that should also be made explicit.
No. The photos show different hole sizes and positions across the backplate and ears. The drawing should identify each hole as a clearance, pivot, locating or threaded feature and specify its dimensions and position.
Choose the grade and temper according to conductivity, mechanical loading, forming requirements and service conditions. State the governing material standard in the RFQ. Copper grades from different standards should not be treated as automatically interchangeable.
The drawing should define the required relationship between the holes in the two ears, along with the datum scheme and acceptable alignment. Machining or inspection after forming can be considered as part of the process plan, subject to design and manufacturing review.
A specified coating can be reviewed. Identify the coating type, thickness, coverage and any surfaces that must remain unplated. Hole fits and mating contact dimensions should account for coating buildup where relevant.
Provide a dimensioned drawing, copper grade and temper, quantity, plate thickness, bend details, slot dimensions, hole specifications, critical tolerances, surface finish and inspection-document requirements. Application and mating-part details help clarify the required interfaces.
RFQ Information
| Required Information | Details to Provide |
|---|---|
| Drawing | Dimensioned PDF and STEP or another suitable 3D format |
| Material | Copper grade, standard, temper and required documentation |
| Quantity | Prototype quantity, order quantity and expected annual demand |
| Blank Details | Thickness, outline, slot dimensions and bend allowance requirements |
| Hole Pattern | Hole count, size, type, spacing and position on each face |
| Clevis Geometry | Ear spacing, opening width, hole alignment and formed profile |
| Critical Tolerances | Bend angles, flatness, hole position and parallelism |
| Surface Finish | Bare copper or specified coating, thickness and coverage |
| Quality Documents | Required material records, inspection reports and additional testing |
| Application | Equipment type, current duty, mechanical loads and service conditions |
| Delivery | Destination, packaging requirements and target schedule |
Send the drawing and requirements throughContact Usfor material and manufacturing review.











