Custom Silver-Plated Pure Copper T-Section Stationary Knife Contact with Orthogonal Blade

Short Description:

Parameter Specification
Product Type Custom copper T-section stationary contact / orthogonal blade terminal
Material Pure copper as identified in the supplied product notes; confirm grade, temper and standard for the order
Possible Grade Options C11000, C10200 or another specified grade, subject to confirmation
Geometry Mounting base with an orthogonally positioned blade-style contact feature
Blade Lead-In Beveled or shaped lead-in described in the supplied notes; final profile to drawing
Base Feature Recessed mounting hole visible in the photographs; hole and counterbore dimensions to drawing
Reference Dimensions Supplied notes list base length 30–250 mm, width 15–120 mm, thickness 5–30 mm, blade height 20–150 mm and blade thickness 3–20 mm. These are reference values only; confirm feasibility and final dimensions by drawing
Surface Treatment Supplied notes specify full-surface hard silver plating. Confirm coating type, coverage and thickness; photos alone cannot verify the coating
Reference Silver Thickness Supplied notes list 10–30 μm; confirm the required value and inspection method before ordering
Construction Route One-piece or joined/composite route to be defined by the drawing and order; not confirmed by the photographs
Tolerances Blade thickness, perpendicularity, flatness and hole position to be agreed by drawing
Electrical Rating Depends on material, dimensions, mating contact, assembly and operating conditions
Inspection Dimensional, visual, hole and surface checks to the agreed inspection plan
Documentation Material and inspection documents to be confirmed at RFQ stage
Applicable Standards Specify required material and equipment standards in the RFQ; compliance is not established by the photographs

Product Detail

Product Tags

Video

Short Description

A custom T-section copper stationary contact with a mounting seat and an orthogonal plug-in blade. The photographs show a recessed mounting hole in the base and a flat blade-style contact feature.

The supplied product notes specify pure copper and full-surface hard silver plating. Confirm the exact copper grade, construction route, coating requirements, dimensions and tolerances against the approved drawing and order specification.

Product Description

This custom T-section stationary contact is designed with a mounting base and a projecting blade positioned at a right angle to the base. The product notes describe a beveled blade lead-in and silver-plated copper construction. The precise blade profile, seating arrangement and whether the part is one-piece or assembled should be confirmed from the production drawing.

The product notes list pure-copper options including C11000 and C10200; the required grade, temper and material standard must be specified for each order. Reference dimensions and a silver-coating range are included below for review, not as guaranteed standard sizes or default specifications. For general material information, see ourPure Copperpage.

Key Features

  • T-section arrangement with a mounting base and perpendicular blade contact.
  • Recessed mounting-hole feature visible in the base.
  • Blade lead-in profile can be specified to suit the mating contact design.
  • Product notes specify pure copper and hard silver plating; grade and coating details require order confirmation.
  • Drawing-based review helps align the blade geometry, base and mating contact interface.

Typical Applications

Application Possible Use
GIS or C-GIS Equipment Stationary contact or plug-in blade terminal in a design-specific assembly
Disconnectors and Earthing Switches Contact interface subject to equipment and drawing requirements
Switchgear Fixed contact component in a custom connection arrangement
Withdrawable Switchgear Plug-in contact feature, subject to the mating contact and operating design
Power Distribution Equipment Custom conductive interface where a perpendicular blade arrangement is required

These are potential applications, not a confirmation of voltage class or equipment qualification. Final suitability depends on the mating contact design, electrical rating, temperature rise, insulation clearances, mechanical loads and applicable equipment standards.

Typical Manufacturing Process

The manufacturing route below is indicative. Confirm whether the design requires one-piece machining or a joined/composite construction before production.

Step Process Details to Confirm
1 Drawing and Material Review Confirm copper grade, temper, geometry and required documents
2 Base Preparation Define mounting profile, hole and counterbore dimensions
3 Blade Feature Processing Confirm blade thickness, lead-in shape, perpendicularity and mating dimensions
4 Construction or Joining Specify one-piece construction or the required joining method, if applicable
5 Surface Preparation and Plating Confirm hard silver plating, coverage, thickness and masking requirements
6 Final Inspection and Packing Inspect agreed dimensions and finish; confirm protection for the blade and contact surfaces

For custom copper machining and drawing-based processing, see ourFine Machiningcapabilities.

Manufacturing & Quality Control

Control Point Review Approach
Material Confirm grade, temper and material identification against the order specification
Base Geometry Check mounting dimensions, hole location and counterbore features against the drawing
Blade Geometry Verify blade thickness, profile, orientation and perpendicularity to agreed criteria
Contact Interface Review mating dimensions and surface condition to the approved drawing
Coating Confirm coating specification and agreed coverage/thickness inspection where required
Electrical or Mechanical Validation Contact resistance, temperature rise, short-circuit or operating-cycle tests only when specified and agreed for the complete assembly
Documentation Confirm required material records and inspection reports before order placement

For inspection methods and available documentation, see ourQuality Assurancepage. Product-specific testing, acceptance criteria and documents should be agreed before ordering.

Frequently Asked Questions

What is a T-section stationary knife contact?

It is a contact component with a mounting base and a blade-style contact feature arranged at a right angle. The exact profile and mating interface depend on the equipment drawing.

Is the product made from pure copper?

The supplied product notes identify it as pure copper, but do not establish the certified grade for each order. Confirm the grade, temper, standard and required material documents in the RFQ.

Is the part hard-silver-plated?

The supplied product notes specify full-surface hard silver plating. Confirm the coating type, thickness, coverage and inspection requirements for the actual order. A photograph cannot verify coating composition or thickness.

Is the contact one-piece or assembled?

The photographs do not establish the manufacturing route. The supplied notes mention both one-piece and composite possibilities, so specify the required construction and joining method, if any, on the drawing.

Can the blade and base dimensions be customized?

Yes, dimensions should be defined by the customer drawing. The ranges listed in the supplied notes are references only and require feasibility confirmation; they should not be treated as guaranteed standard sizes.

What equipment can use this contact?

Potential applications include GIS, switchgear and disconnector assemblies. Confirm the voltage class, mating contact, current, temperature-rise limits, clearances and relevant equipment standard with the project engineer.

What information is needed for a quotation?

Provide a dimensioned drawing, material grade, base and blade dimensions, mounting-hole details, construction route, coating specification, tolerances, quantity, application and required documents.

RFQ Information

Please Provide Details
Material Copper grade, temper and material standard
Drawing 2D or 3D drawing with critical dimensions and tolerances
Base Length, width, thickness, hole and counterbore details
Blade Height, thickness, lead-in profile, orientation and mating dimensions
Construction One-piece or joined/composite requirement and joining details, if applicable
Surface Treatment Hard silver plating or other specified finish, coverage and thickness
Application Equipment type, mating contact and operating requirements
Quantity Sample quantity and production quantity
Documents Material certificate, dimensional report or other required records
Delivery Destination country, packing requirements and target schedule

Send your drawing and requirements throughContact Usfor material and manufacturing review.


  • Previous:
  • Next:

  • Write your message here and send it to us