Custom Copper Conductor Link Rod with Flat Mounting Lugs

Short Description:

Item Specification
Product Type Custom copper conductor link rod / busbar connection rod
Main Profile Round shaft with flattened mounting lugs at both ends
Material Copper grade and temper to be specified and confirmed for the order
Overall Length To approved drawing
Shaft Diameter To approved drawing
End Lugs Width, thickness, transition shape and orientation to drawing
Mounting Holes One hole visible at each end; round or slotted geometry and dimensions to be confirmed from the drawing
Surface Finish Photographs show a silver-colored appearance; coating type and thickness are not visually confirmed
Tolerances Length, straightness, lug dimensions, hole locations and alignment to be agreed
Electrical Rating Depends on material, conductor dimensions, joint design and operating conditions
Inspection Dimensions, hole features, surface condition and other agreed criteria
Documentation Material records and inspection documents to be confirmed before order placement

Product Detail

Product Tags

Video

Short Description

A custom copper conductor link rod with a long round shaft and a flattened mounting lug at each end. The photographs show one hole in each lug and a smooth, silver-colored surface.

Specify the copper grade, temper, overall length, shaft diameter, lug dimensions, hole configuration and surface finish according to the drawing and order requirements.

Product Description

This custom copper conductor link rod is designed with a round central shaft and flat mounting lugs at both ends. The supplied product notes describe one locating hole at one end and an axial adjustment slot at the other. Confirm the final hole shapes, dimensions and orientation against the approved drawing.

The product notes identify the material as copper, but the exact grade and temper should be confirmed for each order. Dimensions, tolerances, surface finish and any coating requirements are also subject to drawing review. For general material information, see ourPure Copperpage. Drawing-based machining requirements can be reviewed throughFine Machining.

Key Features

  • Round-shaft profile with flat mounting lugs at both ends.
  • End-hole configuration can be defined by drawing.
  • Lug orientation and dimensions can be specified for the intended assembly.
  • Material grade, tolerances and surface finish should be confirmed for each order.
  • A drawing-based RFQ supports review of hole alignment and manufacturing feasibility.

Typical Applications

Application Possible Use
Switchgear Conductor link within a custom busbar assembly
GIS Equipment Connection rod for a drawing-specific electrical assembly
Disconnectors and Earthing Switches Conductor connection where the equipment design calls for a link rod
Power Distribution Assemblies Custom connection between electrical components
Renewable Energy Equipment Conductor link in an assembly, subject to electrical and mechanical review

Application suitability depends on the complete assembly design, including current, temperature rise, clearances, insulation, mechanical loading and applicable equipment requirements. These details should be reviewed by the project engineer.

Typical Manufacturing Process

The process below is indicative. The actual route depends on the drawing, grade, order quantity and required finish.

Step Process Details to Confirm
1 Material Selection Confirm copper grade, temper, standard and required documents
2 Bar Preparation Confirm shaft diameter, blank length and straightness requirements
3 End-Lug Processing Confirm lug dimensions, profile and orientation
4 Hole Machining Confirm round-hole and slot details, positions and tolerances
5 Deburring and Finishing Specify edge condition, surface finish and any required coating
6 Final Inspection and Packing Check agreed dimensions and appearance; confirm packaging requirements

Manufacturing & Quality Control

Control Point Review Approach
Material Confirm grade and temper against the order specification and required material records
Shaft Check diameter, length and straightness against the drawing
End Lugs Check dimensions, profile, orientation and alignment
Hole Pattern Verify hole shape, size, position and orientation against the drawing
Surface and Edges Inspect for visible damage or burrs according to the agreed finish
Final Documentation Confirm required inspection records and material documents at order placement

For information about inspection methods and available documentation, seeQuality Assurance. Product-specific tests, tolerances and documents should be agreed before ordering.

Frequently Asked Questions

What is a copper conductor link rod?

It is a conductor component with a long shaft and connection features at both ends. This pictured design has a round central section and flattened mounting lugs with a hole at each end.

Are both end holes round?

The supplied product notes describe one round locating hole and one axial adjustment slot. Confirm this configuration against the drawing, including the slot length, width, position and orientation.

Which copper grade is used?

The supplied product notes identify the material as copper but do not verify a specific grade for this pictured part. Confirm the required grade, temper, standard and material-document requirements in the RFQ.

Is the rod plated?

The photographs show a silver-colored surface but do not identify the coating. If plating is required, specify the coating metal, thickness and any areas that need masking.

Can the end lugs be made in a different orientation?

The lug profile, hole positions and orientation should be dimensioned on the drawing. Any angle between the end lugs should also be specified and reviewed before production.

What information is needed for a quotation?

Please provide the copper grade and temper, drawing, overall length, shaft diameter, lug and hole details, tolerances, finish, quantity, application, required documents and destination.

RFQ Information

Please Provide Details
Material Copper grade, temper and material standard
Drawing 2D or 3D drawing with dimensions and critical tolerances
Shaft Overall length, diameter and straightness requirements
End Lugs Width, thickness, profile and orientation
Holes Round or slotted, size, position and orientation
Finish Surface condition or specified surface treatment
Quantity Sample quantity and production quantity
Application Equipment type and relevant operating requirements
Documents Material certificate, inspection report or other required records
Delivery Destination country, packing requirements and target schedule

Send your drawing and requirements to Cymber Metal throughContact Usfor a material and manufacturing review.


  • Previous:
  • Next:

  • Write your message here and send it to us