Custom Copper Conductor Rod with Dual Internal Threads
Video
Short Description
One-piece copper conductor rod with a slim cylindrical shank, enlarged ends and internal threads at both ends. The dumbbell-style profile provides a reduced central section between larger end interfaces. Thread size, engagement depth, material grade, overall dimensions and surface finish are specified according to the approved drawing and mating assembly.
Product Overview
This dumbbell-shaped copper conductor rod has a long, narrow cylindrical shank connecting two enlarged ends. The end faces contain internal threads, as shown in the supplied close-up images. The stepped and tapered transitions, thread geometry and end-face details can be defined to match the customer’s equipment interface.
Potential uses include switchgear or circuit-breaker conductor assemblies and bushing center conductors. Final application suitability depends on the equipment design, electrical duty, mechanical loads and validated assembly requirements. Cymber Metal’sPure Copperrange can be used to discuss material options; the exact copper grade and temper should be stated in the RFQ.
Key Features
| Feature | Practical Value |
|---|---|
| Dumbbell-Style Profile | Combines a reduced central shank with larger end sections. |
| Dual Internal Threads | Provides threaded interfaces at both ends for specified mating parts. |
| One-Piece Construction | Avoids a body joint where the design requires a continuous conductor. |
| Enlarged End Sections | Allow end interfaces to be dimensioned independently from the central shank. |
| Tapered Transitions | Provide a gradual change between the shank and enlarged ends when specified. |
| Drawing-Based Dimensions | Allows thread details, critical datums and assembly interfaces to match the equipment design. |
| Protective Packaging Options | End protection can be specified to help prevent handling damage during shipment. |
Manufacturing Process
The manufacturing route is selected after reviewing the drawing, copper grade, dimensions and order requirements. Local end forming may be evaluated where suitable; the photos alone do not establish the product’s manufacturing history.
| Stage | Process Scope |
|---|---|
| 1. Drawing Review | Confirm material, overall dimensions, end interfaces, threads and critical datums. |
| 2. Material Selection | Select copper stock to the specified grade, temper and documentation requirements. |
| 3. Stock Preparation | Prepare stock suitable for the specified shank and enlarged end sections. |
| 4. End Forming, If Applicable | Evaluate local forming or another suitable method for the enlarged ends. |
| 5. CNC Turning | Machine the shank, stepped ends and transition profiles. |
| 6. Thread Machining | Produce the internal threads and any specified counterbores or lead-ins. |
| 7. Deburring and Cleaning | Remove machining burrs and clean the finished part as required. |
| 8. Optional Surface Treatment | Apply specified plating or another approved finish if required. |
| 9. Final Inspection | Check agreed dimensions, threads, surface condition and required records. |
Cymber Metal’sFine Machiningservice is relevant for drawing-based machining review. If a plated finish is required, specify the coating, thickness and coverage for review with theBusbar Plating Shop.
Manufacturing & Quality Control
| Control Area | Inspection / Verification Scope |
|---|---|
| Material | Verify the specified copper grade and temper against the agreed purchasing documents. |
| Overall Dimensions | Inspect overall length, shank diameter and enlarged end dimensions. |
| End Profile | Check shoulders, tapers, collars and face geometry against the drawing. |
| Internal Threads | Verify thread standard, size, pitch, tolerance and usable engagement as specified. |
| Blind Bore Details | Check bore depth and bottom geometry where these are critical requirements. |
| Alignment | Inspect straightness, concentricity or runout according to the designated datums. |
| Surface Condition | Check for burrs, handling damage and unacceptable machining marks. |
| Optional Plating | Verify coating coverage and dimensions according to the agreed finish specification. |
| Documentation | Provide material and inspection records as required by the purchase specification. |
Inspection methods and acceptance criteria should be agreed before production. SeeQuality Assurancefor Cymber Metal’s quality-control approach.
Typical Applications
These are potential applications based on the product geometry and brief. Final suitability depends on the equipment design and validation requirements.
| Application | Potential Role | Design Considerations |
|---|---|---|
| Switchgear Assemblies | Threaded conductor stem or internal connection rod | Mating interfaces, clearances, current duty and mechanical loading |
| Circuit-Breaker Assemblies | Contact or conductor component | Operating motion, contact arrangement and equipment-specific validation |
| Wall Bushings | Center conductor stem | Bushing geometry, insulation system and interface dimensions |
| Gas-Insulated Equipment | Internal conductor connection | Assembly clearances and any separately specified sealing requirements |
| Disconnector Assemblies | Threaded conductor or contact support | Alignment, fastening and operating loads |
| Custom Power Equipment | Drawing-specific copper conductor | Temperature, current, environment and maintenance conditions |
Frequently Asked Questions
The product brief describes dual internal threads, and the supplied close-up photos show threaded end faces. The thread size, pitch, class, depth and whether both ends use identical specifications should still be confirmed on the drawing.
The product brief describes blind internal-threaded bores, but the required bore configuration must be confirmed against the final drawing. Specify bore depth, bottom geometry and any counterbore or lead-in needed for assembly.
It is a conductor rod with a narrower central shank and enlarged ends. In this product, the end faces also have internal threads. The profile and interfaces are customized to suit the mating parts and assembly requirements shown on the approved drawing.
Choose the grade and temper according to the required conductivity, mechanical properties, forming needs and service conditions. State the governing material standard in the RFQ. Grade names from different standards should not be treated as automatically equivalent.
Yes. The drawing can specify the overall length, shank diameter, end diameters, shoulders, transition radii and thread details. Include the mating component dimensions and critical assembly datums so that the interface can be reviewed.
A specified coating can be reviewed. Identify the coating type, thickness, plated areas and any masking requirements. Thread fit and mating dimensions should account for coating buildup where plating applies to those surfaces.
No. The product shape alone does not establish voltage, partial-discharge, temperature-rise or sealing performance. Those requirements depend on the complete assembly design, materials, clearances and validated tests.
Provide a dimensioned drawing, copper grade and temper, quantity, thread specifications, critical tolerances, surface finish and inspection-document requirements. Application details such as current duty, operating conditions and mating components help clarify manufacturing and material requirements.
RFQ Information
| Required Information | Details to Provide |
|---|---|
| Drawing | Dimensioned PDF and STEP or another suitable 3D format |
| Material | Copper grade, standard, temper and required documentation |
| Quantity | Prototype quantity, order quantity and expected annual demand |
| Main Dimensions | Overall length, shank diameter and enlarged-end diameters |
| Thread Details | Standard, size, pitch, class, depth and blind/through configuration |
| End Interfaces | Mating component, seating faces and any counterbore or lead-in |
| Critical Tolerances | Straightness, runout, concentricity and interface requirements |
| Surface Finish | Bare copper or specified coating, thickness and coverage |
| Quality Documents | Required material records, inspection reports and additional testing |
| Application | Equipment type, current duty, mechanical loads and service conditions |
| Delivery | Destination, packaging requirements and target schedule |
Send the drawing and requirements throughContact Usfor material and manufacturing review.











