Custom Copper Disconnector Moving Contact Blade with Split Contact End

Short Description:

Parameter Specification / Customization Basis
Product Type Copper moving contact blade / switchgear contact arm
Material Copper; exact grade and temper to be specified
Main Profile Long flat blade or linkage arm
Slotted End Split width, length, root geometry and end-hole dimensions per drawing
Spring Seat Annular seat or groove if required by the design
Contact Features Raised ribs or contact lands if specified on the drawing
Midsection Holes Four-hole pattern shown; sizes, types and spacing per drawing
Pivot End Recessed or countersunk seat and hole geometry per mating hardware
Overall Dimensions Length, width and thickness per approved drawing
Surface Finish Bare copper or specified finish
Optional Coating Silver, tin or other specified plating subject to design review
Critical Tolerances Hole positions, slot symmetry, contact-face geometry and flatness per drawing
Electrical Requirements Material and conductivity requirements defined by the equipment specification

Product Detail

Product Tags

Video

Short Description

Custom copper moving contact blade with a long flat body, a longitudinally slotted end, a multi-hole linkage pattern and a countersunk pivot seat at the opposite end. Contact features, hole functions, material grade and tolerances are defined by the approved drawing and mating assembly.

Product Overview

This copper contact arm has a long, flat body with four holes along the midsection. One end has a split opening around a circular feature, while the opposite end has a larger recessed pivot-style hole. The supplied brief also describes an annular spring seat and raised contact features; their dimensions and functions should be confirmed against the final drawing.

The part may be considered for disconnector or earthing-switch mechanisms where a moving conductive blade or linkage arm is required. Actual suitability depends on the switch design, contact arrangement, operating loads and electrical validation. Cymber Metal’sPure Copperrange is a starting point for discussing material options; specify the required grade and temper for the application.

Key Features

Feature Practical Value
Slotted Contact End Provides a split-end geometry where specified by the switch design.
End Pivot Feature Recessed hole or seat can interface with the specified pivot hardware.
Multi-Hole Midsection Supports linkage or accessory mounting positions defined by the assembly drawing.
Long Flat Conductor Body Combines a conductive path with a blade-like mechanical form.
Annular Spring Seat Option Can be included where required to locate a spring or washer.
Contact-Rib Option Raised contact features can be specified for a designed contact interface.
Drawing-Based Configuration Allows hole layout, end features, surface finish and material to match the equipment.

Manufacturing Process

The process route should be selected after reviewing the material, body dimensions, end geometry and functional requirements. The product brief describes machining and slotting; any forming or special contact-finishing operations should be confirmed for the specific order.

Stage Process Scope
1. Drawing Review Confirm material, hole functions, slot geometry, pivot interface and critical datums.
2. Material Selection Specify copper grade, temper and required documentation.
3. Blank Preparation Prepare copper stock to the required blade outline and thickness.
4. Profile Machining Machine the external profile, radiused edges and end contours.
5. Hole Machining Produce the midsection holes and end holes according to the drawing.
6. Slot and Seat Machining Machine the split slot, annular seat or recessed pivot feature where specified.
7. Contact-Face Finishing Finish specified contact lands or ribs to the agreed requirements.
8. Deburring and Cleaning Remove burrs and clean the part as required.
9. Optional Surface Treatment Apply specified plating or other approved finish if required.
10. Final Inspection Verify agreed dimensions, hole positions, slot and contact features.

Custom machining requirements can be reviewed through Cymber Metal’sFine Machiningservice. If plating is required, define the coating type, thickness and coverage for review with theBusbar Plating Shop.

Manufacturing & Quality Control

Control Area Inspection / Verification Scope
Material Verify the specified copper grade and temper against purchasing documents.
Overall Dimensions Check length, width, thickness and external profile.
Hole Pattern Inspect hole count, size, type, spacing and position.
Slotted End Check slot width, length, symmetry and root geometry as specified.
Pivot Seat Verify recess profile, hole size and position relative to drawing datums.
Contact Features Inspect specified ribs, lands or contact-face geometry.
Flatness and Alignment Check requirements designated as critical on the drawing.
Surface Condition Check for burrs, handling damage and unacceptable machining marks.
Optional Plating Verify coating coverage and dimensions against the agreed finish specification.
Documentation Provide material and inspection records as required by the purchase specification.

Inspection methods and acceptance criteria should be agreed before production. SeeQuality Assurancefor Cymber Metal’s quality-control approach.

Typical Applications

These are potential applications based on the product geometry and supplied brief. Final suitability depends on the equipment design and validation requirements.

Application Potential Role Design Considerations
Disconnector Assemblies Moving contact blade or pivot arm Contact geometry, pivot fit, operating motion and mechanical loads
Earthing Switches Moving conductive link or contact arm Closing force, alignment, contact arrangement and equipment validation
Gas-Insulated Switchgear Internal moving contact component Assembly clearances, interfaces and insulation coordination
Indoor or Outdoor Switches Hinged blade or linkage conductor Environmental conditions, mounting and operating mechanism
Load-Switch Assemblies Conductive moving link Switching duty, contact design and mechanical operation
Custom Electrical Equipment Drawing-specific copper blade or connector Current duty, temperature, interfaces and service conditions

Frequently Asked Questions

What is a copper disconnector moving contact blade?

It is a copper conductive arm used as a moving blade or contact linkage in a switching assembly. This design has a slotted end, a row of midsection holes and a recessed feature at the opposite end. Its exact role depends on the switch mechanism and mating components.

What is the purpose of the split slot?

The product brief describes a split or flexure slot, but its mechanical function must be confirmed by the equipment designer. Specify the slot length, width, root shape and relationship to the end hole because these features affect the part’s geometry and movement.

What is the recessed feature at the pivot end?

The brief describes a countersunk or contoured pivot seat. The photos show a recessed end hole, but the exact seat profile and mating hardware should be defined by drawing. Include the pivot diameter, washer or bolt interface and any required clearance.

Are the four midsection holes threaded?

The photos show holes along the body, but do not establish whether they are clearance, tapped or locating holes. Identify each hole type, diameter, thread specification and position on the drawing.

Which copper grade should be specified?

Select the copper grade and temper according to conductivity, mechanical requirements, forming needs and service conditions. State the governing material standard in the RFQ. Similar grade names from different standards should not be assumed interchangeable.

Can the blade include an annular spring seat or raised contact ribs?

Those features are described in the supplied brief and can be included in the product design if required. Their dimensions, location and relationship to the slotted end should be shown on the approved drawing and reviewed with the mating parts.

Can the contact blade be plated?

A specified coating can be reviewed. State the coating type, thickness, coverage and any masking requirements. Contact faces, pivot areas and threaded or fitted interfaces should account for coating buildup where applicable.

What information is needed for a quotation?

Provide a dimensioned drawing, copper grade and temper, quantity, hole and slot details, pivot interface, contact-feature requirements, tolerances, surface finish and inspection-document requirements. Application details and mating-component information help confirm the intended interfaces.

RFQ Information

Required Information Details to Provide
Drawing Dimensioned PDF and STEP or another suitable 3D format
Material Copper grade, standard, temper and required documentation
Quantity Prototype quantity, order quantity and expected annual demand
Main Dimensions Length, width, thickness and external profile
Slotted End Slot dimensions, end-hole geometry and functional requirements
Hole Pattern Hole count, sizes, types and center distances
Pivot Interface Seat profile, pivot size and mating hardware details
Contact Features Spring seat, raised ribs or contact lands if required
Critical Tolerances Flatness, hole positions, slot symmetry and contact-face requirements
Surface Finish Bare copper or specified coating, thickness and coverage
Quality Documents Required material records, inspection reports and additional testing
Application Equipment type, operating loads and service conditions
Delivery Destination, packaging requirements and target schedule

Send the drawing and requirements throughContact Usfor material and manufacturing review.


  • Previous:
  • Next:

  • Write your message here and send it to us