Copper T-Shaped Conductor Connector for Switchgear
Video
Short Description
Cymber Metal supplies custom copper T-shaped conductor connectors for switchgear, circuit-breaker and GIS assemblies. Made from specifiedpure copper, the T-shaped body combines machined conductor bores with a branch mounting interface.
Internal grooves, bore fits, mounting holes and optional plating are prepared to approved drawings. Contact interfaces are matched to the specified mating conductor and contact system; electrical ratings depend on the complete equipment design and validation.
Key Features
- T-shaped geometry for drawing-defined conductor branching and contact support.
- Machined bores and internal grooves matched to the selected contact system.
- Branch mounting face with custom hole positions and thread requirements.
- Copper grade, surface treatment and inspection scope selected to the application specification.
Manufacturing & Quality Control
| Stage | Scope |
|---|---|
| Technical Review | Confirm copper grade, blank route, mating conductors, contact-system data, datums and inspection requirements |
| Forming and Machining | Select the blank route and useCNC machining supportfor bores, grooves, mounting faces and threaded features |
| Finishing | Deburr bore intersections and edges; clean and apply optional surface treatment or plating to specification |
| Inspection | Verify drawing-defined features and agreed material/coating requirements before protective packaging |
For inspection methods and available documentation, see ourQuality Assurancepage. Product-specific testing and acceptance criteria are confirmed before order placement.
Typical Applications
- Vacuum circuit-breaker outgoing conductor assemblies.
- GIS main-circuit conductor branches.
- Switchgear busbar connections and contact housings.
- Transformer and industrial high-current transition nodes.
Equipment voltage class, continuous current, short-circuit duty and dielectric performance require assembly-level design validation.
Copper T-Shaped Conductor Connector FAQ
It forms a conductive branch or contact-support interface in a drawing-defined electrical assembly. Unlike a plumbing tee, its functional requirements concern conductor fit, electrical contact, mounting geometry and equipment validation rather than fluid service.
C11000, C10200 and C10100 can be reviewed against the required material standard, condition and operating requirements. Specify conductivity or oxygen-content requirements separately; grades from different national standards should not be treated as automatically equivalent.
The route depends on geometry, material and quantity. A near-net forged blank may reduce material removal, while another approved stock or forming route may suit a different order. The selected route and inspection requirements are confirmed before production.
Grooves can be reviewed for the specified contact system. Supply the contact manufacturer’s installation dimensions, mating-conductor size and required surface finish. Groove appearance alone does not establish compatibility with a particular contact brand or model.
These requirements can be reviewed for selected features. H7 is a diameter-dependent tolerance zone, not a universal ±0.02 mm tolerance. Specify nominal dimensions, datums, coaxiality and whether acceptance applies before or after plating.
Suitability cannot be confirmed from copper grade or external radii alone. Voltage class, clearances, field distribution, contact design and short-circuit duty must be assessed within the complete equipment design. Radiused edges alone do not establish corona-free performance.
Full or selective silver plating can be reviewed, with tin or nickel options where specified. Provide coating thickness, undercoat, masked areas and acceptance criteria. Bore and groove dimensions must account for the coating; ASTM B700 may be specified for silver where applicable.
Material certificates, bore/groove dimensional reports, thread-inspection records and plating reports can be agreed with the order. Conductivity testing, ultrasonic examination or other internal-soundness checks and third-party inspection require defined methods, coverage and acceptance criteria.
Request a Quote
Contact Cymber Metalwith your 2D/3D drawing, copper grade and condition, quantity, bore and groove dimensions, contact-system details, tolerances, plating requirements, inspection documents, destination and required delivery date. Include equipment voltage class, current and short-circuit duty where relevant.










