CNC-Turned Copper Contact Cylinder with Internal Thread
Video
Short Description
Custom copper contact cylinder featuring a tubular body, internal thread, stepped outer diameters and circumferential grooves. Material grade, bore geometry, thread specification and surface finish are defined by the approved drawing. Suitable for evaluation in switchgear, GIS and other electrical contact assemblies requiring a drawing-specific conductive component.
Product Overview
This copper contact cylinder combines a hollow cylindrical body with an internally threaded opening and stepped external features. The photographed component shows an annular end face, circumferential grooves and a reduced-diameter end section with a collar.
The internal thread provides a drawing-defined connection interface, while the bore and external lands can be specified to match the surrounding assembly. Groove functions, including any sealing, positioning or retention requirements, must be established by the assembly drawing.
Material selection can include suitablepure copper grades, with the final choice based on conductivity, oxygen-content requirements, mechanical condition and subsequent processing. Ourprecision machining servicessupport enquiries for custom turned, bored and threaded copper components.
This is a custom component, not a complete circuit breaker or independently voltage-rated switching device.
Key Features
| Feature | Product Detail / Design Consideration |
|---|---|
| Tubular Copper Body | Provides a hollow conductive component geometry for drawing-specific assemblies |
| Internal Thread | Thread size, pitch, class and usable depth can be defined for the mating connection |
| Stepped Outer Diameters | Multiple external lands allow different interface diameters within one component design |
| Circumferential Grooves | Groove width, depth and position follow the drawing; function depends on the assembly |
| End Collar | Collar diameter, thickness and transition radii can be specified for the required interface |
| Controlled Bore Geometry | Bore size, straightness, cylindricity and surface finish can be included in the inspection requirements |
| Optional Surface Treatment | Coating requirements can be reviewed for designated contact or environmental exposure surfaces |
| Drawing-Based Customization | Overall length, wall thickness, thread geometry and external features are specified for the project |
Manufacturing Process
| Stage | Process / Control Focus |
|---|---|
| Drawing Review | Confirm material, datums, bore geometry, threads, grooves, surface requirements and critical dimensions |
| Starting Material Selection | Select suitable copper tube, hollow stock or solid stock according to geometry and material availability |
| Blank Preparation | Cut stock with appropriate machining allowance and identify the material batch |
| Rough Turning and Boring | Establish the main external and internal geometry using a suitable machining sequence |
| Finish Machining | Machine specified diameters, bore surfaces, shoulders, collars and groove features |
| Internal Threading | Produce the required thread and check its usable length and mating requirements |
| Edge Finishing | Deburr thread entrances, bore edges, grooves and external transitions according to the drawing |
| Optional Surface Treatment | Apply an agreed coating process where required, allowing for dimensional changes |
| Final Inspection and Packing | Inspect the agreed characteristics, clean the component and protect functional surfaces for shipment |
For related finishing information, see ourbusbar plating shop. Plating feasibility, bore coverage and thread allowances for this cylindrical component require separate review.
Manufacturing & Quality Control
| Inspection Area | Proposed Verification | Acceptance Basis |
|---|---|---|
| Material Identity | Review material documentation and agreed composition checks | Selected grade and purchase specification |
| Oxygen Content | Use a suitable oxygen-analysis method when required | Specified oxygen limit; not inferred from routine composition screening alone |
| External Dimensions | Measure diameters, shoulders, collar and overall length | Approved drawing |
| Bore Dimensions | Check bore diameter and specified internal features | Drawing limits and agreed measurement locations |
| Internal Thread | Use suitable thread gauges or an agreed inspection method | Specified thread size, pitch, class and engagement length |
| Geometric Accuracy | Inspect specified coaxiality, cylindricity or runout | Drawing datums and geometric tolerances |
| Wall Thickness | Measure at agreed locations where required | Minimum thickness and permitted variation |
| Surface Roughness | Measure designated surfaces with suitable equipment | Specified Ra value and measurement conditions |
| Surface and Edge Condition | Inspect for burrs, handling damage and unacceptable machining defects | Agreed visual and workmanship criteria |
| Conductivity / Hardness | Perform testing when included in the order | Material condition and agreed acceptance limits |
| Plating Quality | Check specified thickness, coverage and other agreed coating characteristics | Approved coating specification |
| Documentation | Provide the agreed material and inspection records | Purchase-order requirements |
Inspection scope, sampling and reporting should be agreed before production. Further information is available on ourquality assurance page.
Typical Applications
The following are potential application areas, subject to confirmation of the component’s actual function and equipment requirements.
| Application Area | Potential Component Role | Items Requiring Confirmation |
|---|---|---|
| Gas-Insulated Switchgear | Tubular conductive housing or contact-system component | Electric-field design, mating interfaces and equipment qualification |
| Circuit Breaker Contact Assemblies | Outer cylinder, threaded connector or conductive sleeve | Contact arrangement, operating movement and thermal requirements |
| Embedded-Pole Assemblies | Drawing-specific conductive insert or tubular adapter | Insulation interface, material requirements and assembly process |
| Electrical Bushings | Custom tubular conductor or connection component | Current path, insulation clearances and mechanical interfaces |
| Industrial Electrical Equipment | Internally threaded copper connector or housing | Current duty, joint design and service environment |
| Special Electrode Assemblies | Custom bored copper body or electrode housing | Cooling, joining, material condition and operating requirements |
Frequently Asked Questions
A copper contact cylinder is a cylindrical conductive component used within an electrical assembly. Its exact role depends on the contact arrangement, mating parts and equipment design.
No. This listing covers a custom copper component, not a complete circuit breaker, GIS assembly or vacuum interrupter. Equipment ratings cannot be established from the component photograph alone.
C11000, C10200 and C10100 can be considered according to the application. The required standard, material condition, conductivity and oxygen-content limits should be stated in the enquiry.
Yes, these features can be specified in the drawing for technical review. Please include thread size, pitch, class, usable depth, bore dimensions and any required relationship between the bore and external diameters.
Their function must be confirmed from the assembly design. Depending on the drawing, grooves may support retention, positioning, sealing or another purpose; their appearance alone does not establish their function.
Silver plating can be reviewed as an optional requirement. The coating thickness, plated areas, any underlayer, thread allowance and final inspection criteria must be agreed before production.
One photograph shows this cylinder beside a separate windowed copper sleeve. The image alone does not confirm that the two components form a matched assembly or demonstrate their operating relationship.
Please provide a drawing or CAD model, material grade, quantity, critical dimensions, thread specification, surface treatment and inspection requirements. Details of the mating assembly help clarify functional requirements.
Request a Quote
| Required Information | Details to Provide |
|---|---|
| Drawing / CAD File | Dimensioned PDF and STEP or other available CAD format |
| Material | Grade, applicable standard and required condition |
| Main Dimensions | Outside diameter, bore diameter, overall length and wall thickness |
| Thread Requirements | Size, pitch, class, engagement length and gauging requirements |
| External Features | Groove, collar, shoulder and transition dimensions |
| Critical Tolerances | Dimensional limits, datums and geometric tolerances |
| Surface Finish | Required roughness and designated functional surfaces |
| Plating | Coating type, thickness, coverage and final dimensional requirements |
| Inspection Documents | Required tests, reports and material documentation |
| Order Quantity | Prototype quantity, batch quantity and expected repeat demand |
| Application | Component function, mating interfaces and relevant operating conditions |
| Delivery | Destination and requested delivery schedule |
Contact Cymber Metalwith your drawing and requirements to request a technical review and quotation.











