CNC-Turned Ball-Nose Multi-Grooved Pure Copper Contact Pin

Short Description:

Item Specification / Enquiry Reference
Product Ball-nose multi-grooved copper contact pin
Product Type CNC-turned conductive contact stud or pin
Material Options C11000, C10200, C10100 or another specified copper grade
Material Form Cold-drawn copper rod or other approved machining stock
Nose Geometry Rounded or spherical nose, customized by drawing
Outer Profile Stepped cylindrical body with collars, shoulders and circumferential grooves
Grooves Seal, retaining, contact or positioning grooves according to the assembly design
Opposite End Flat circular end with central bore or internal threaded bore
Reference Body Diameter Approximately Ø6–Ø100 mm as an initial enquiry range
Reference Total Length Approximately 20–350 mm as an initial enquiry range
Thread Metric or imperial internal thread when specified
Dimensional Tolerance Confirmed by drawing, grade, temper and machining process
Groove Tolerance Groove width, root diameter and axial position confirmed by drawing
Surface Finish Machined, polished, bright copper or plated finish
Contact Surface Roughness Target value confirmed according to mating contact or seal requirements
Plating Options Hard silver, tin or nickel plating when technically required
Conductivity Determined by selected copper grade and agreed test method
Hardness Confirmed according to material grade and temper
Inspection Documents Dimensional report, material certificate or third-party inspection as required
Packaging Protective packaging for machined conductive components and export shipment

Product Detail

Product Tags

Video

Short Description

This CNC-turned ball-nose multi-grooved pure copper contact pin is a precision cylindrical conductive component with a rounded spherical nose, stepped outer diameters, multiple circumferential grooves and a central bore at the opposite end.

The component can be manufactured from C11000, C10200, C10100 or another specified copper grade according to the customer drawing. Groove geometry, bore or internal thread, surface finish, plating and dimensional tolerances are confirmed during technical review.

It can be evaluated for switchgear, circuit breaker, bushing, high-current connector and other conductive assemblies where controlled contact geometry and reliable mechanical fit are required.

Product Overview

The part has a ball-shaped nose for a rounded insertion interface, a multi-step cylindrical body and several circumferential grooves along the shaft. The opposite end includes a flat circular face with a central bore or threaded bore, depending on the approved design.

The grooves may be designed for an O-ring, retaining ring, contact element, spring component or other mating part. Their exact function should be confirmed from the assembly drawing rather than inferred from the product photograph.

Cymber Metal can review pure copper and oxygen-free copper options based on conductivity, machinability, mechanical requirements and the customer’s applicable standard. For general material information, see thePure Copperproduct range.

For turning, grooving, boring, threading and finishing support, this product can be reviewed through theFine Machiningservice.

Key Features

Feature Description
Ball-nose tip Rounded nose geometry can support a smoother approach to a mating socket or contact assembly.
Multi-step body Several diameters and shoulders can provide controlled positioning inside a housing or connector.
Circumferential grooves Grooves can be designed for seals, retaining rings, contact elements or installation positioning.
Central opposite-end bore The end bore can be produced as a plain hole, blind hole or threaded bore according to the drawing.
CNC-turned profile Turning supports continuous circular geometry and repeatable control of diameters and groove locations.
Copper material options C11000, C10200, C10100 and other specified copper grades can be evaluated for the application.
Optional plating Silver, tin or nickel plating can be reviewed for selected contact or environmental requirements.
Drawing-based customization Nose radius, groove shape, pitch, bore, shoulders and overall length can be adapted to the mating assembly.

Manufacturing Process

Step Process Description
Drawing Review Confirm the nose radius, body diameters, groove details, bore or thread, material and inspection requirements.
Material Preparation Select and cut copper rod or other approved stock to the required machining blank length.
CNC Turning Machine the spherical nose, stepped diameters, collars, shoulders and end faces.
Groove Turning Produce circumferential seal, retaining, contact or positioning grooves using suitable form tools.
Bore or Thread Machining Drill, bore and thread the opposite end when an internal threaded feature is specified.
Edge Treatment Apply chamfers, radii and controlled edge breaks to improve assembly fit and reduce sharp edges.
Deburring and Cleaning Remove machining burrs and clean the part before any surface treatment or inspection.
Surface Treatment Apply polishing, anti-tarnish treatment, silver plating, tin plating or nickel plating when ordered.
Final Inspection Verify critical diameters, nose profile, groove dimensions, bore or thread and surface condition.
Packaging Protect the finished copper pin from scratches, contamination, impact and unnecessary oxidation.

Manufacturing & Quality Control

Control Area Inspection or Verification Method
Material Grade Review material certificate and conduct additional composition testing when required
Chemical Composition Optical emission or other agreed material-analysis method
Traceability Batch or heat documentation maintained according to the order requirements
Outer Diameters Micrometers, optical shaft measurement or CMM
Ball-Nose Profile Profile measurement, optical inspection or CMM according to drawing
Groove Dimensions Groove width, root diameter, radius and axial position checked with calibrated equipment
Bore or Thread Bore gauges, precision plug gauges and thread gauges where applicable
Coaxiality CMM or suitable precision measurement method
Surface Roughness Profilometer measurement on specified contact, sealing or sliding surfaces
Edge Condition Visual inspection and magnified inspection for burrs, chips or sharp edges
Plating Coating thickness, coverage, adhesion and appearance checked when plating is ordered
Conductivity Conductivity testing according to the selected copper grade and agreed method
Documentation Dimensional inspection report, material certificate and third-party inspection can be discussed
Quality System Inspection scope follows the approved drawing, purchase specification and quality plan

Exact conductivity, hardness, tolerance, plating thickness and thread class should be confirmed before production. For high-voltage or safety-critical assemblies, the customer should provide the complete mating-part drawing and operating conditions.

Typical Applications

Application Potential Use
Draw-out switchgear Plug-in male contact stud or conductive contact pin
Vacuum circuit breakers Copper contact interface or conductive operating component
SF6 circuit breakers Custom conductive stud for a gas-insulated switching assembly
GIS bushings Conductive center pin or bushing connection component
Compact switchgear Stepped contact pin for a confined electrical housing
High-current connectors Blind-mate conductive pin or male connector element
Energy-storage equipment Copper contact component for battery or power connection assemblies
Transformer and reactor equipment Conductive connection pin or machined copper terminal
Industrial automation Quick-change conductive pin or custom locking component
Welding equipment Copper conductive pin for a special-purpose tooling or connection assembly

Frequently Asked Questions

What is this product?

It is a CNC-turned copper contact pin with a rounded ball-shaped nose, stepped cylindrical body, multiple circumferential grooves and a central bore or threaded bore at the opposite end.

Which copper grades are available?

C11000, C10200 and C10100 can be considered for different conductivity, machinability and material-certification requirements. The final grade should be selected against the customer’s drawing and operating conditions.

What are the circumferential grooves used for?

Depending on the design, they may accommodate O-rings, retaining rings, contact elements, springs or positioning features. The groove function, width and root radius should be confirmed from the assembly drawing.

Can the spherical nose be customized?

Yes. Nose diameter, radius, transition shape and length can be adjusted to match the mating socket, spring contact or installation path.

Can the opposite-end bore be threaded?

Yes. A plain bore, blind bore or internal threaded bore can be produced according to the specified diameter, pitch, depth and tolerance class.

Is silver plating available?

Hard silver plating can be reviewed for selected contact applications. Plating thickness, selective areas, masking and dimensional allowance should be defined before production.

Can this pin be used in switchgear?

The geometry can be evaluated for switchgear, circuit breaker, bushing or connector assemblies. Final suitability depends on the complete electrical, mechanical, thermal, insulation and installation requirements.

What information is needed for a quotation?

Please provide the drawing or 3D model, material grade, outer diameters, total length, nose geometry, groove details, bore or thread, quantity, surface treatment, inspection documents and application.

Request a Quote

Required Information Details to Provide
Drawing 2D drawing, 3D model or marked product photographs
Material Copper grade, temper and applicable standard
Geometry Nose diameter, body diameters, shoulders, grooves and end bore
Thread Thread type, diameter, pitch, depth and tolerance class
Quantity Prototype, sample, batch quantity and expected annual usage
Surface Machined, polished, passivated, silver-plated, tin-plated or nickel-plated
Inspection Dimensional report, conductivity test, material certificate or third-party inspection
Application Switchgear, GIS, VCB, bushing, connector or industrial equipment
Delivery Destination country, packaging, Incoterms and required project timing

For material selection, machining feasibility and quality-document planning,contact Cymber Metal for an RFQ. Send the drawing and mating-part details so the manufacturing route can be reviewed accurately.


  • Previous:
  • Next:

  • Write your message here and send it to us