Custom 90-Degree L-Shaped Pure Copper Busbar Bracket with Two Mounting Holes

Short Description:

Parameter Specification
Product type Custom L-shaped copper busbar bracket / electrical connection plate
Material Pure copper as identified in the supplied product notes; confirm exact grade and temper
Geometry Nominal 90-degree L shape
Mounting holes Two shown, one on each leg; through-hole or tapped-hole details to be specified
Reference dimensions Supplied notes list long leg 20–300 mm, short leg 12–200 mm, width 10–120 mm and thickness 2–15 mm. Confirm feasibility and final dimensions by drawing
Bend radius and angle tolerance Specify on drawing and confirm before production
Surface finish Bare copper or optional finish by order requirement and feasibility
Edge condition Deburring or edge rounding can be specified
Inspection Dimensional and visual checks to agreed drawing and order requirements
Documentation Material and inspection documents to be confirmed at RFQ stage
Applicable standards Specify the required material and product standards in the RFQ

Product Detail

Product Tags

Video

Short Description

A custom L-shaped pure copper busbar bracket for right-angle electrical connections. The pictured part has two mounting holes, with one on each perpendicular leg.

Hole type, material grade, dimensions, bend details and surface finish should be confirmed against the customer’s drawing and order requirements.

Product Description

Custom L-Shaped Pure Copper Busbar Bracket

This custom 90-degree L-shaped pure copper busbar bracket is designed for electrical connections where a compact right-angle transition is required. The pictured component has two perpendicular legs and one mounting hole on each leg. Hole type, spacing and orientation can be specified by drawing.

The supplied product notes identify the material as pure copper. The exact grade and temper should be confirmed for each order. C11000 or C10200 may be considered when specified and available. Dimensions, bend geometry, tolerances and edge condition are also subject to drawing review.

For general material information, see ourPure Copperpage. Custom cutting, hole-making or other machining details can be reviewed throughFine Machining.

Key Features

  • L-shaped profile for a right-angle electrical connection.
  • Two mounting holes, with the final hole type and layout defined by drawing.
  • Material grade, temper and dimensions can be specified for the order.
  • Surface finish and edge condition can be discussed during drawing review.
  • A drawing-based RFQ helps confirm fit, hole alignment and manufacturing feasibility.

Typical Applications

Application Possible use
Switchgear Right-angle connection within a busbar assembly
Power distribution panels Custom electrical connection between components
Industrial control cabinets Compact copper connection where layout requires a 90-degree turn
Custom busbar assemblies Bracket or connection-plate configuration defined by customer drawing

Application suitability depends on the electrical rating, temperature rise, clearances, insulation and assembly design. These requirements should be reviewed by the buyer’s engineering team.

Typical Manufacturing Process

The route below is indicative; actual steps depend on the drawing, grade and order requirements.

Step Process Details to confirm
1 Material selection Confirm copper grade, temper and required documents
2 Cutting or blank preparation Set dimensions and blank form from drawing
3 Bending/forming Confirm nominal angle, bend radius and leg dimensions
4 Hole machining Confirm hole type, size, location and any thread specification
5 Deburring and finishing Specify required edge condition and surface finish
6 Final inspection and packing Check agreed dimensions and appearance; confirm packaging requirements

Manufacturing & Quality Control

Control point Review approach
Material Confirm grade and temper against the order specification and available material documentation
Geometry Check leg dimensions and bend angle against agreed drawing requirements
Hole pattern Verify hole size, type and position against the drawing
Surface and edges Inspect for visible damage or burrs according to the agreed finish
Final documentation Confirm required inspection records or material documents when placing the order

For information about the company’s quality processes, seeQuality Assurance. Product-specific tests, tolerances and documents should be agreed before ordering.

Frequently Asked Questions

Is the bracket made from pure copper?

The supplied product notes identify it as pure copper, but the photos alone cannot verify the material grade. Confirm the required grade and temper in the RFQ, and specify any material-document requirements.

Are the mounting holes threaded?

The images show two holes but do not establish whether they are through-holes or tapped holes. Please provide the hole type, diameter or thread, and position on the drawing.

Can the bracket be made to custom dimensions?

Dimensions should be supplied on a drawing. The ranges in the supplied notes are reference information only and need feasibility confirmation for the specific design and order.

Can a surface finish be specified?

Yes, state whether bare copper or a particular surface treatment is required. The finish, coverage and any thickness requirements should be confirmed before production.

Can this part be used in switchgear?

It may suit a right-angle connection in a switchgear assembly, but suitability depends on the electrical and mechanical design. Confirm current, temperature, clearances, insulation and applicable standards with the project engineer.

What information is needed for a quotation?

Please provide the copper grade and temper, drawing, dimensions, tolerances, hole details, surface finish, quantity, application, required documents and destination. You can send these details throughContact Us.

RFQ Information

Please provide Details
Material Grade, temper and material standard
Drawing 2D or 3D file with dimensions and critical tolerances
Geometry Leg lengths, width, thickness, bend angle and bend radius
Holes Through or tapped, size/thread, position and orientation
Finish Bare copper or specified surface treatment
Quantity Sample quantity and production quantity
Application Equipment type and relevant operating requirements
Documents Material certificate, inspection report or other required records
Delivery Destination country, packing requirements and target schedule

Send your drawing and requirements toCymber Metalfor a material and manufacturing review.


  • Previous:
  • Next:

  • Write your message here and send it to us