Brazed Copper Contact Cup for Circuit Breakers and Disconnectors
Video
Short Description
Cymber Metal supplies custom brazed copper contact cup assemblies for circuit breakers and disconnectors. The cup body and conductive stem are machined separately from specifiedpure copperand joined by a drawing-defined brazed connection.
Cup dimensions, external grooves, stem length, connection threads and optional plating are matched to the mating assembly. Brazing parameters, post-braze alignment and inspection requirements are agreed before production; electrical ratings depend on the complete equipment design.
Key Features
- Separate cup-and-stem construction offers an alternative to machining the entire geometry from one large blank.
- Machined cup cavity and circumferential profile matched to the mating assembly.
- Custom stem length, thread geometry and connection interfaces.
- Post-braze finishing with drawing-defined alignment and contact-surface requirements.
Manufacturing & Quality Control
| Stage | Scope |
|---|---|
| Material and Drawing Review | Confirm copper grade, material condition, mating parts, joint design and required inspection documents |
| Cup and Stem Machining | UseCNC machining supportfor the cavity, outer profile, stem and joining surfaces |
| Brazing | Apply the agreed filler, heating method, atmosphere and thermal cycle; control joint clearance and assembly location |
| Post-Braze Finishing | Finish critical bores, faces and threads as required; check alignment after the joining cycle |
| Final Inspection and Protection | Complete agreed dimensional, joint and coating checks; clean and protect the cup cavity, threads and contact surfaces for shipment |
For inspection methods and available documentation, see ourQuality Assurancepage. Product-specific testing and acceptance criteria are confirmed before order placement.
Typical Applications
- Cup-and-stem conductive components in circuit-breaker assemblies.
- Contact carriers and conductive connections in disconnectors.
- Drawing-specific copper inserts for switchgear and embedded-pole assemblies.
Suitability depends on the mating contacts, insulation system, mechanical loads and operating conditions. The component is not automatically an arc-interrupting contact or a vacuum-envelope seal.
Brazed Copper Contact Cup FAQ
Separate machining can reduce blank size and material removal when a wide cup joins a slender stem. Any cost or copper savings depend on geometry and quantity. The brazed interface must also meet the agreed electrical and mechanical acceptance criteria.
Grade selection depends on conductivity, strength and the brazing atmosphere. Oxygen-free grades may be preferred for certain cycles. C11000 should not be assumed suitable for hydrogen-bearing reducing atmospheres because of hydrogen-embrittlement risk. Confirm the material and thermal cycle together.
Yes, subject to drawing review. Specify groove profiles, cavity dimensions, wall thickness, stem interfaces and thread fits. External grooves are not automatically sealing or retention features; their function and acceptance requirements must be defined by the equipment design.
No. A threaded opening alone does not establish a through coolant passage. Water-cooled versions need a defined internal flow path, connections, wall thickness, pressure rating and leak-test requirements, reviewed separately from the standard conductive assembly.
No. Vacuum brazing describes the joining environment, not the leak performance of the finished product. Vacuum-tight service requires a dedicated joint design, specified leak rate and suitable testing. The photographed geometry does not establish hermetic performance.
The inspection plan can include visual and dimensional checks, resistance measurements, mechanical validation and suitable nondestructive testing. Methods, sampling and acceptance limits must be agreed. AWS A5.8 and ISO 17672 classify filler metals; they do not alone define a complete brazing procedure or finished-joint acceptance plan.
Full or selective silver plating can be reviewed, with tin or nickel where specified. Define coating thickness, undercoat, masking and inspection requirements. Critical bores, threads and contact dimensions must account for the coating thickness.
There is no universal rating from copper grade or shape alone. Current path, joint resistance, contact pressure, cooling, insulation clearances and duty cycle must be evaluated in the complete equipment. Temperature-rise, dielectric and short-circuit validation criteria should be defined by the equipment specification.
Request a Quote
Contact Cymber Metalwith your 2D/3D drawing, copper grade, quantity, cup and stem dimensions, thread details, joint requirements, surface treatment, inspection documents, destination and required delivery date. Include operating current, duty cycle, equipment voltage and any cooling or leak-tightness requirements.










