Triangular Copper Connection Bracket for High-Current Assemblies
Video
Short Description
Cymber Metal supplies custom triangular copper connection brackets for high-current electrical assemblies. Made from specifiedpure copper, the one-piece body combines three corner mounting bosses, a central bore and an open U-shaped slot.
Hole spacing, slot geometry, contact faces and optional plating are prepared to approved drawings. The design can be reviewed for busbar, terminal or cable-connection interfaces; current capacity, temperature rise and mechanical loading depend on the complete assembly.
Key Features
- Three integral corner bosses within a triangular mounting layout.
- Open U-shaped slot with drawing-defined clearance and root geometry.
- Central bore and contact faces matched to the mating assembly.
- One-piece conductive body with optional full or selective plating.
Manufacturing & Quality Control
| Stage | Scope |
|---|---|
| Material and Drawing Review | Confirm copper grade, condition, blank route, mating parts and critical dimensions |
| CNC Machining | UseCNC machining supportfor the outer profile, bosses, bores, slot and contact faces; select the sequence to manage distortion |
| Finishing | Deburr hole edges and slot transitions, clean, and apply agreed surface treatment or plating |
| Final Inspection | Verify drawing-defined dimensions and surfaces, complete agreed material/coating checks, and protect contact faces for shipping |
For inspection methods and available documentation, see ourQuality Assurancepage. Product-specific testing and acceptance criteria are confirmed before order placement.
Typical Applications
Potential uses, subject to equipment-specific design review:
- Conductive connection brackets in switchgear and disconnectors.
- Busbar and terminal interfaces in resistance-welding secondary circuits.
- Connection supports for furnace power-cable assemblies.
- Common-potential busbar junctions in high-power rectifier equipment.
Triangular Copper Connection Bracket FAQ
No. Three-point describes the corner mounting layout, not three electrically isolated phases. The one-piece copper body is electrically continuous. It can connect drawing-defined points at a common potential, but must not bridge separate phases.
C11000, C10200 and C10100 can be reviewed against the required conductivity, material condition and service environment. Where greater strength is needed, a copper-alloy alternative such as C18150 requires separate review; it is not an automatic substitute for pure copper.
Yes, subject to drawing review. Specify the mating-part dimensions, slot width and depth, root radius, hole pattern and contact-face datums. Tight tolerances are confirmed feature by feature, including whether acceptance applies before or after plating.
There is no universal rating based on shape or copper grade alone. Current path, contact pressure, joint resistance, cooling, duty cycle and insulation clearances must be assessed in the complete assembly. Temperature-rise, dielectric and short-circuit requirements need defined validation criteria.
Full or selective silver plating can be reviewed, with tin or nickel where specified. Provide coating thickness, undercoat, masking and acceptance requirements. Slot clearances, bore fits and contact-face dimensions must account for the coating.
Material certificates, dimensional reports and coating records can be agreed with the order. Conductivity, surface roughness and ultrasonic inspection require defined methods and coverage. EN 10204 Type 3.1 documentation and third-party inspection should be confirmed before production.
Request a Quote
Contact Cymber Metalwith your 2D/3D drawing, copper grade and condition, quantity, mating-part details, critical dimensions, contact loading, plating requirements, inspection documents, destination and required delivery date. Include operating current, duty cycle, cooling conditions and equipment voltage where relevant.









