Copper Corona Shield Cup for High-Voltage Switchgear

Short Description:

Item Specification
Product Copper Corona Shield Cup / Electric Field Grading Bell
Material Options C11000 ETP copper, C10200 oxygen-free copper or C10100 oxygen-free electronic copper; grade and condition as specified
Applicable Standards ASTM B152/B152M for sheet/plate or ASTM B187/B187M for bar feedstock, where applicable; forging specifications agreed separately. Finished component acceptance to approved drawing
Outer Diameter 40–500 mm indicative range; subject to technical review
Overall Height 25–300 mm indicative range
Wall Thickness 2–25 mm indicative range; variable sections subject to geometry review
Internal Geometry Stepped cavity, central opening and drawing-defined locating features
Manufacturing Options CNC turning from wrought or forged blanks; spinning or deep drawing with finish machining subject to design review
Critical Requirements Edge radii, wall thickness, concentricity, face runout and surface roughness to approved drawing
Surface Options Machined, deburred and cleaned; polishing or anti-tarnish treatment as specified
Plating Options Silver, tin or nickel plating subject to order confirmation; thickness, masking and finished dimensions agreed before production
Inspection Material verification, dimensions, profile, concentricity, runout and surface condition; conductivity, roughness and coating checks as agreed
Documentation Material test certificate, dimensional report and coating records as specified; additional certification subject to order confirmation

Product Detail

Product Tags

Video

Short Description

Cymber Metal supplies custom copper corona shield cups for electric-field grading around conductive assemblies in high-voltage switchgear. Made from specifiedpure copper, the cup-shaped component features a rounded outer profile, stepped internal cavity and central opening.

Cup dimensions, edge radii, internal steps and optional coatings are specified by approved drawings. Designs for vacuum circuit breakers, GIS and related equipment require confirmation of mounting position, insulation clearances and assembly-level electrical performance.

Key Features

  • Rounded outer contour and rim for drawing-defined electric-field grading geometry.
  • Stepped internal cavity and central opening for custom assembly interfaces.
  • Copper grade and material condition selected for the application.
  • Custom radii, surface requirements and optional selective plating.

Manufacturing & Quality Control

Stage Scope
Drawing Review Confirm profile, mounting arrangement, datums, critical radii and inspection criteria
Material and Blank Selection Agree copper grade, condition and a machining or forming route suited to the geometry
Precision Finishing UseCNC machining supportfor the cavity, central opening, steps and external profile
Surface Preparation Deburr, clean and apply the agreed finish or coating; protect field-facing surfaces from handling damage
Final Inspection Check specified geometry and surface requirements; complete agreed material/coating checks before protective packing

For inspection methods and available documentation, see ourQuality Assurancepage. Product-specific testing and acceptance criteria are confirmed before order placement.

Typical Applications

  • Conductor-connection shielding in high-voltage switchgear.
  • Electric-field grading around contact assemblies in vacuum circuit-breaker equipment.
  • Copper conductor shields in GIS, subject to dielectric-system design review.
  • Custom grading covers for disconnectors and bushing assemblies.

Suitability depends on the complete insulation system, mounting arrangement and operating conditions.

Copper Corona Shield Cup FAQ

What is a copper corona shield cup used for?

It is intended to manage local electric-field distribution around conductive parts. The rounded profile is part of the equipment’s grading design; the cup alone does not guarantee corona-free or low-partial-discharge operation.

Which copper grade should I choose?

C11000, C10200 and C10100 can be reviewed against conductivity, forming, joining and cleanliness requirements. Specify the required grade, condition and material standard rather than treating these grades as automatically interchangeable.

Is the shield machined, forged or spin-formed?

The route depends on wall thickness, depth and production quantity. CNC machining from wrought or forged blanks and forming followed by finish machining can be reviewed. Photographs alone do not establish the manufacturing route.

Can you customize the cavity and hold tight tolerances?

Custom steps, openings, radii and locating features can be reviewed against your drawing. Identify datums, concentricity, runout and roughness requirements. Feasible tolerances depend on size, wall stiffness, workholding and whether dimensions apply before or after plating.

Does the cup have a fixed voltage or partial-discharge rating?

No universal rating is assigned to the component alone. Voltage suitability depends on geometry, clearances, dielectric medium and the complete assembly. Corona, partial-discharge and dielectric acceptance require agreed equipment-level test conditions.

Can the shield be silver-plated or polished?

These options can be reviewed, along with tin or nickel plating where specified. Define coating thickness, masking, adhesion and surface acceptance. Polishing or plating does not by itself establish corona or dielectric performance.

Is it suitable for use inside a vacuum interrupter?

Not automatically. Vacuum-service use requires separate review of material, cleanliness, outgassing and joining requirements. This listing does not establish vacuum compatibility, hermetic sealing or pressure-tightness; state the installation location when requesting a quote.

What inspection reports can be supplied?

Material certificates, dimensional reports and coating records can be specified with the order. Conductivity, roughness, internal-soundness or third-party inspection requirements need agreed methods and acceptance limits. Electrical assembly testing is a separate scope.

Request a Quote

Contact Cymber Metalwith your 2D/3D drawing, copper grade, quantity, critical radii and tolerances, surface/coating requirements, inspection documents, destination and target delivery date. Include installation location, equipment voltage, dielectric medium and any corona or partial-discharge acceptance criteria.


  • Previous:
  • Next:

  • Write your message here and send it to us