Custom L-Shaped Copper Terminal Lug with Hexagonal Recess

Short Description:

Parameter Reference Specification / Requirement
Product Type Custom L-shaped copper connection terminal
Main Geometry Rounded-end flat tang with a short nominal right-angle lip
Face Features Two face holes; diameters, steps, and positions according to drawing
Fastener Recess Hexagonal recess for a specified nut or bolt head
Primary Material Options C11000, C10200, or C10100; grade and condition to be confirmed
Alternative Materials C10400, C10700, or C18150 may be evaluated where different strength or thermal requirements apply; these are not equivalent substitutes
Long Tang Length Reference range: 20–160 mm
Short Lip Length Reference range: 6–60 mm
Width Reference range: 10–100 mm
Thickness Reference range: 3–18 mm
Fastener Family Reference range: M4–M16; actual head or nut dimensions must be specified
Hexagonal Pocket Fit Reference across-flats allowance: nominal +0.05 to +0.12 mm; mating fastener and final coated condition to be defined
Bend Angle Nominal 90°; reference angular tolerance ±0.25°, subject to drawing confirmation
Contact-Face Flatness Reference maximum deviation: 0.02–0.03 mm, depending on the specified face; agree one acceptance limit
Surface Roughness Reference target: Ra ≤0.4 μm on designated surfaces
Hardness Reference target: 85–125 HV; dependent on grade, condition, and test location
Electrical Conductivity Requirement and test method to be agreed for the selected material and condition
Surface Options Bare copper, agreed anti-tarnish treatment, tin plating, silver plating, or nickel plating
Material Standard Applicable material standard selected according to grade and starting form, such as ASTM B187/B187M or ASTM B152/B152M
Inspection Documents Material records, dimensional reports, coating reports, and other agreed documentation

Product Detail

Product Tags

Video

Short Description

This custom L-shaped copper terminal lug features a rounded-end connection tang, two face holes, a short bent lip, and a hexagonal recess for a matching nut or bolt head. It provides a drawing-based connection component for compact electrical assemblies where fastening access, contact geometry, and locating features require coordinated design.

Material options include C11000 electrolytic tough-pitch copper and C10200 or C10100 oxygen-free copper. Dimensions, material condition, recess fit, contact-face requirements, and tin, silver, or nickel plating are reviewed against the approved drawing.

Product Overview

An L-shaped copper terminal lugis a conductive connection component with a flat connection tang and a short bent section. Unlike a cable lug with a crimp barrel, this design is intended for integration into a bolted electrical connection assembly.

The pictured component combines a rounded end with two face holes and a hexagonal recess on the reverse face. The recess can accommodate a matching fastener and help resist its rotation during tightening when pocket dimensions, engagement depth, copper condition, and assembly torque are correctly specified.

The short lip can provide a locating or supporting interface with the mating assembly. Its exact function depends on the housing, mounting arrangement, and mechanical load path.

Cymber Metal’spure copper productsprovide a starting point for material selection, while ourFine Machiningcategory covers drawing-based component processing.

Key Features

Feature Design Purpose Engineering Consideration
Rounded-End Tang Provides a curved connection-end outline Fit and electrical clearances must be checked within the complete assembly
Hexagonal Fastener Recess Helps resist rotation of a matching nut or bolt head Performance depends on fit, depth, wall thickness, material condition, and torque
Short Bent Lip Provides a locating, supporting, or secondary connection feature Function and loading must be established by the mating design
Two Face Holes Supports the specified fastening or locating arrangement Hole function, diameter, spacing, and datum references require confirmation
Copper Material Options Allows selection around electrical and manufacturing requirements Conductivity, strength, forming behavior, and cost vary by grade and condition
Specified Contact Face Establishes a controlled mating surface Flatness, roughness, cleanliness, and coating requirements should be defined together
Optional Plating Adapts the contact surface to the intended joint environment Coating type, thickness, coverage, and adhesion criteria require agreement
Drawing-Based Customization Coordinates the terminal with the mating equipment Final approval requires component and assembly-level validation

Manufacturing Process

The production route is selected after reviewing material condition, bend geometry, pocket details, tolerances, and order quantity.

Stage Process Scope Main Review Point
Drawing and Feasibility Review Review the connection tang, lip, holes, hexagonal recess, and functional surfaces Establish datums, critical dimensions, and final coated requirements
Material Selection Select the copper grade, starting form, and condition Balance conductivity, forming behavior, and resistance to fastener loading
Blank Preparation Prepare the component outline and machining allowance Control material identification, edge condition, and stock allowance
Forming and Feature Production Produce the lip, holes, and recess through the agreed process route Select the sequence to manage distortion and maintain feature relationships
Precision Finishing Finish designated contact faces, holes, recess dimensions, and edges Verify drawing-specific flatness, roughness, fit, and burr limits
Surface Treatment Apply the agreed cleaning, anti-tarnish treatment, or plating Account for coating buildup on contact surfaces and inside the recess
Final Inspection and Packing Complete agreed inspections and protective packing Protect contact faces, pocket edges, and finished surfaces during handling

For coating-related requirements, review Cymber Metal’sBusbar Plating Shop. Coating suitability and acceptance criteria should be confirmed for the specific terminal design.

Manufacturing & Quality Control

Inspection scope, methods, and sampling frequency should be agreed before production.

Control Area Inspection / Verification Acceptance Basis
Material Identification Review material records and specified grade or condition Approved purchase specification and material documentation
Overall Dimensions Check tang length, lip length, width, and thickness Approved drawing
Hole Geometry Check hole diameter, center distance, position, and any specified steps Drawing datums and tolerances
Hexagonal Recess Check across-flats size, depth, position, and relevant corner geometry Approved mating fastener and defined coated condition
Bend Geometry Check bend angle, lip position, and specified radii Drawing-specific angular and dimensional requirements
Contact-Face Quality Check flatness, roughness, burrs, and surface condition Designated functional-face requirements
Mechanical Properties Perform hardness or other testing when specified Selected grade, material condition, test method, and test location
Electrical Properties Verify conductivity or connection resistance when required Agreed test method, conditions, and acceptance limits
Surface Treatment Check specified coating thickness, coverage, and adhesion Approved coating specification and inspection plan
Assembly Validation Evaluate fastener fit, pocket deformation, and resistance to rotation where required Actual mating hardware and an agreed torque-test procedure
Documentation and Traceability Review batch identification and required inspection records Agreed order documentation package

For background on Cymber Metal’s quality approach, review ourQuality Assurancepage. Product-specific inspection criteria, traceability records, and documentation requirements should be agreed before ordering.

Typical Applications

The following are potential application areas, subject to equipment-specific design review and validation. The component is not assigned a universal current, voltage, or torque rating.

Application Potential Component Role Required Confirmation
Compact Contactor Assemblies Bolted terminal or conductive transition component Contact geometry, temperature rise, fastening method, and housing fit
Pre-Charge Relay and Battery Distribution Assemblies Connection between a terminal interface and another conductor Duty cycle, joint resistance, vibration, and insulation coordination
Circuit-Breaker Assemblies Internal connection terminal or transition piece Mechanical loads, equipment requirements, and assembly qualification
Photovoltaic Inverter and Energy-Storage Equipment Copper connection component within a power assembly Thermal performance, mounting space, coating, and electrical clearances
Industrial Busbar Connections Drawing-specific right-angle transition or locating terminal Contact area, bolt preload, conductor loading, and environmental exposure

FAQ

What is an L-shaped copper terminal lug?

An L-shaped copper terminal lug is a conductive component with a connection tang and a bent section. This version has a rounded end, two face holes, a short lip, and a hexagonal fastener recess. It is designed for a specified bolted connection arrangement rather than direct cable crimping.

What is the purpose of the hexagonal recess?

The recess accommodates a matching hexagonal nut or bolt head and can help resist rotation during tightening. Its effectiveness depends on fastener dimensions, pocket depth, wall thickness, copper condition, and applied torque. The pocket geometry alone does not establish captive retention or an approved tightening torque.

Can this terminal be assembled without a second wrench?

It may support single-tool tightening when the recess provides adequate engagement and the complete assembly has been validated. This should not be assumed for every installation. Qualification should use the actual fastener, coating condition, installation torque, and assembly access arrangement.

What does the short bent lip do?

The lip can act as a locating feature, support surface, or secondary connection interface, depending on the mating design. It should not automatically be described as a cable-retention feature. Its function and load capacity need to be established through the equipment drawing and assembly testing.

Which copper grade should be selected?

C11000, C10200, and C10100 can be evaluated according to conductivity, material condition, forming requirements, joining processes, and cost. Silver-bearing copper or C18150 may be considered when different strength or thermal characteristics are needed, but substitution requires engineering review because their properties differ.

Does the rounded end increase electrical clearance?

Not necessarily. A rounded end changes the component outline and may fit a curved enclosure more conveniently, but electrical clearance and creepage depend on the complete assembly. Any improvement must be established from the actual geometry, operating conditions, and applicable equipment requirements.

Can the terminal be tin-, silver-, or nickel-plated?

These finishes can be evaluated according to the mating contact material, operating environment, temperature, and joint requirements. Specify coating thickness, coverage, masking, and inspection criteria. Coating buildup must also be considered when defining the final dimensions of the hexagonal recess and other mating features.

What information is needed to confirm tightening torque?

Provide the bolt and nut specifications, strength class, lubrication or coating condition, joint stack, required preload, pocket geometry, copper grade and condition, and installation method. Torque should be validated for the complete joint, including pocket deformation and fastener rotation where relevant, rather than inferred from thread size alone.

Request a Quote

Required Information Details to Provide
Drawing Dimensioned 2D drawing and, where available, a 3D model
Material Copper grade, material standard, and condition
Component Dimensions Tang length, lip length, width, thickness, and bend geometry
Hole Details Diameters, positions, steps, and locating requirements
Fastener Details Thread size, nut or bolt-head dimensions, standard, and coating condition
Recess Requirements Across-flats size, depth, fit, and coated-condition dimensions
Contact-Surface Requirements Functional faces, flatness, roughness, and burr limits
Surface Treatment Bare copper or specified plating, including thickness and coverage
Operating Conditions Current, temperature, environment, vibration, and mechanical loading
Validation Requirements Installation torque, joint resistance, temperature-rise testing, or other agreed checks
Quantity Sample quantity, production batch size, and estimated annual demand
Documentation and Delivery Inspection records, traceability, destination, packing, and requested schedule

Contact Cymber Metal for a drawing-based quotationcovering material selection, processing feasibility, surface treatment, and inspection requirements.


  • Previous:
  • Next:

  • Write your message here and send it to us