Custom Internally Threaded Copper Electrode Cup

Short Description:

Parameter Reference / Specification
Product Form Internally threaded copper cup with stepped blind cavity and raised end boss
Candidate Pure Copper Grades C10100, C10200, or C11000; grade and temper subject to confirmation
Alternative Alloy Review C14500, C18150, or silver-bearing copper where application requirements justify a different property balance
Outside Diameter Reference range: 8–120 mm
Total Length Reference range: 20–300 mm
Internal Geometry Stepped bore, internal shoulders, and blind-end geometry according to drawing
Bore Depth Drawing-dependent; depth-to-diameter ratio, chip evacuation, and inspection access require review
End Boss Diameter, height, and central recess geometry according to drawing
Internal Thread Metric or Unified thread; diameter, pitch, class, and engagement length to be specified
OD / ID Tolerance Reference target: ±0.01–0.02 mm on designated features
Bore-to-OD Coaxiality Reference target: 0.015–0.025 mm; datum system and evaluation method must be defined
Blind-End Thickness Tolerance Reference target: ±0.02 mm
Surface Roughness Reference target: Ra 0.2–0.4 μm on specified surfaces
Hardness Reference range: 85–135 HV; dependent on material grade and condition
Electrical / Thermal Properties Confirm by selected grade, temper, temperature, and applicable test requirements
Surface Treatment Bare machined copper, anti-tarnish treatment, or specified silver, nickel, or tin coating subject to review
Operating Ratings Current, voltage, temperature, pressure, and vacuum limits require application-specific approval

Product Detail

Product Tags

Video

Short Description

Custom copper electrode cup featuring an internally threaded opening, stepped recessed cavity, stepped cylindrical exterior, and raised end boss. Drawing-based customization can cover material grade, bore geometry, thread specification, mating diameters, and surface treatment. C10100, C10200, and C11000 are material options for review, while alternative copper alloys may be considered for different machining, temperature, or wear requirements. Final dimensions, inspection criteria, and application suitability are confirmed before production.

Product Overview

A copper electrode cup is a hollow copper component designed to combine a conductive body with drawing-defined mounting, locating, or contact features. This version incorporates an internally threaded opening, a stepped blind cavity, and an external end boss with a small central recess.

The stepped exterior and internal shoulders provide distinct surfaces that can be dimensioned for mating parts. Their actual locating, electrical, or sealing functions depend on the assembly drawing rather than appearance alone.

Material selection starts with the application’s electrical, thermal, mechanical, and environmental requirements. Cymber Metal’spure copper productsprovide a starting point for reviewing oxygen-free and electrolytic tough-pitch copper options. Grade, temper, and material documentation should be specified together.

For custom geometry, Cymber Metal can supportcopper machining reviewcovering bore accessibility, thread engagement, wall thickness, datum selection, and inspection planning. Cooling, vacuum, arc-service, and switching applications require separate engineering validation.

Key Features

Feature Design Relevance
Internally Threaded Opening Provides a drawing-defined connection to a mating threaded component
Stepped Internal Cavity Allows different bore diameters and shoulders to be incorporated within the cylindrical body
Raised End Boss Provides an additional interface that can be dimensioned for the intended assembly
Stepped Outer Diameter Supports different mating diameters and axial shoulder positions
Copper Material Options Enables material selection around conductivity, machinability, strength, and service temperature
Drawing-Based Customization Coordinates geometry, tolerances, finishes, and inspection requirements with the final assembly

Manufacturing Process

The following is a proposed manufacturing route. Actual operations depend on the selected blank, material condition, geometry, and approved process plan.

Stage Proposed Operation Main Considerations
Drawing Review Review 2D drawings, 3D models, interfaces, and operating conditions Identify critical dimensions, minimum wall thickness, datums, and inspection access
Material Preparation Select and prepare a suitable copper or copper-alloy blank Confirm grade, temper, material specification, and traceability requirements
External Turning Machine the cylindrical body, shoulders, and end boss Control designated fit diameters and protect soft copper from clamping damage
Internal Machining Drill and bore the recessed cavity and internal steps Select tooling and chip-control methods suitable for bore depth and wall thickness
Internal Threading Machine the specified internal thread Confirm thread standard, pitch, class, relief, and effective engagement length
Deburring and Cleaning Remove burrs and machining residues Protect thread entrances, cavity shoulders, and specified contact surfaces
Surface Treatment Apply the agreed finish or coating where required Define masking, coating thickness, dimensional allowance, and acceptance criteria
Final Inspection and Packing Inspect agreed characteristics and protect the finished component Follow the approved inspection and packaging plan

Where coatings are required, Cymber Metal’splating capability informationprovides background for discussion. Suitability for internal threads and recessed surfaces must be assessed for the specific component.

Manufacturing & Quality Control

Control Area Inspection / Review Approach Acceptance Basis
Material Identification Review material certificates and perform additional identification testing where specified Ordered grade, temper, and applicable material specification
Oxygen Requirements Use suitable oxygen-specific documentation or testing when required Agreed grade limit and test method; routine alloy identification alone is insufficient
External Dimensions Inspect diameters, shoulders, length, and boss geometry with suitable instruments Approved drawing and inspection plan
Internal Geometry Inspect accessible bore diameters, steps, depth, and end thickness using suitable methods Defined features, tolerances, and measurement access
Geometric Relationships Evaluate the specified bore-to-OD or boss relationship against the drawing datums Agreed geometric control and evaluation method
Internal Threads Use appropriate thread gauges and dimensional checks Specified thread standard, size, pitch, class, and inspection frequency
Surface Condition Check specified roughness, burrs, contamination, and visible damage Surface requirements assigned to individual features
Material Properties Conduct conductivity or hardness testing when included in the order Grade-specific limits, test conditions, and agreed sampling
Coating Quality Check thickness, coverage, adhesion, and masked areas as specified Approved coating specification
Leak / Pressure Testing Perform only where required by an approved pressure-containing design Agreed medium, pressure, duration, leak limit, and safe test procedure
Documentation Agree material certificates, dimensional reports, and traceability records before ordering Purchase order and inspection-document requirements

Buyers can review Cymber Metal’scertificate informationduring supplier evaluation. Current certificate scope and order-specific reports, including any EN 10204 3.1 documentation, should be confirmed before purchase.

Typical Applications

These are potential application categories for engineering review, not verified service ratings for the photographed component.

Application Potential Component Role Required Confirmation
Industrial Electrode Assemblies Conductive cup, housing, or threaded electrode component Current, temperature, duty cycle, interface geometry, and material requirements
Plasma Equipment Custom electrode body or cooling-related component Arc exposure, cooling arrangement, pressure integrity, erosion behavior, and any insert design
Switchgear and Circuit-Breaker Assemblies Drawing-specific contact cup or conductive seat Contact resistance, temperature rise, mechanical interfaces, and equipment qualification
RF and Vacuum Equipment Conductive cylindrical housing or interface component Vacuum compatibility, cleanliness, outgassing, joining method, and leak requirements
High-Current Test Equipment Custom conductive sleeve or electrode holder Contact loading, electrical resistance, thermal behavior, and mating fit
Liquid-Cooled Electrical Assemblies Conductive body incorporating a drawing-defined cavity Coolant compatibility, sealing design, wall thickness, corrosion, and pressure testing

Frequently Asked Questions

What is an internally threaded copper electrode cup?

It is a hollow copper component with an internal thread at its opening and a cavity shaped for a particular assembly. This version also has stepped external diameters and a raised end boss. Its precise electrical, locating, and connection functions are determined by the approved assembly design.

Which copper grade should be selected?

C10100 and C10200 are oxygen-free copper options, while C11000 is electrolytic tough-pitch copper. Selection depends on conductivity, thermal exposure, processing, environment, and documentation requirements. The required material standard and temper should be stated rather than treating these grades as automatically interchangeable.

Can C14500 or C18150 replace pure copper?

They may be considered, but they are not direct substitutes in every application. C14500 is often considered where machinability matters, while C18150 may be reviewed where strength and softening resistance are important. Their conductivity, heat treatment, and mechanical properties differ from those of pure copper.

Does the internal thread provide a leak-tight seal?

Not by itself. An internal thread provides mechanical engagement, but sealing depends on the complete joint design, including thread form, sealing surfaces, seals, assembly conditions, and operating environment. Pressure or vacuum service requires an approved sealing arrangement and defined acceptance testing.

Can the bore depth, end boss, and thread be customized?

These features can be submitted for drawing-based feasibility review. Provide bore diameters and depth, minimum wall thickness, boss dimensions, central recess details, and thread specifications. Deep cavities and tight geometric tolerances may require different tooling or inspection methods, so feasibility must be checked together.

Is this component suitable for water-cooled plasma equipment?

Suitability cannot be established from photographs alone. Review is needed for coolant passages, pressure, minimum wall thickness, operating temperature, arc exposure, and any emitter insert or joining arrangement. The finished assembly must meet the equipment designer’s validation and inspection requirements.

Can silver, nickel, or tin plating be specified?

These coatings may be considered after application and process review. The drawing should identify coating type, thickness, coverage, masking, and acceptance criteria. Internal threads and recessed surfaces need particular attention because coating buildup and distribution can affect mating fit and final dimensions.

What inspection documents should be requested?

Specify the required material certificate, dimensional report, thread inspection records, and any conductivity, hardness, coating, or leak-test reports before ordering. EN 10204 3.1 documentation and third-party inspection must be agreed as part of the order rather than assumed to accompany every shipment.

Request a Quote

Required Information Details to Provide
Drawings Dimensioned 2D drawing and 3D model where available
Material Grade, standard, temper, and any oxygen or property requirements
Geometry Outside diameters, total length, bore steps, depth, end thickness, and boss details
Thread Standard, size, pitch, class, engagement length, and mating-part information
Critical Tolerances Fit dimensions, datums, geometric controls, and surface roughness
Surface Treatment Coating type, thickness, masking, cleaning, and packaging requirements
Operating Conditions Current, voltage, temperature, pressure, coolant, vacuum, and duty cycle as applicable
Quantity Prototype quantity, batch quantity, and estimated repeat demand
Documentation Material certificates, inspection reports, traceability, and third-party requirements
Delivery Destination, requested delivery date, and shipping terms

Contact Cymber Metal for a drawing-based quotationcovering material selection, machining feasibility, surface treatment, and inspection requirements.


  • Previous:
  • Next:

  • Write your message here and send it to us