L-Shaped Copper Busbar Connector with Hexagonal Fastener Recess
Video
Short Description
Cymber Metal supplies custom L-shaped copper busbar connectors with a hexagonal fastener recess for compact bolted electrical connections. The right-angle geometry connects perpendicular interfaces, while the recessed hex seat can restrain a matching bolt head or nut against rotation when correctly dimensioned. Material options include C11000 ETP copper, C10200 oxygen-free copper and C10100 oxygen-free electronic copper. Leg dimensions, hole patterns, pocket geometry and surface finishes are specified to the customer drawing. Potential applications include switchgear terminals, contactor connections, battery distribution units and energy-storage equipment.
L-Shaped Copper Busbar Connector Overview
An L-shaped copper busbar connector is a conductive component that joins electrical interfaces arranged at approximately 90 degrees. This version incorporates a hexagonal recess around one connection hole, providing a shaped seat for a compatible hex bolt head or nut.
The photographed component has two holes on the longer leg, a separate hole on the perpendicular leg, rounded external corners and a radiused transition between the two legs. The hexagonal recess is visible on the reverse face of the larger connection hole.
A correctly matched recess can reduce the need to hold the seated fastener with a second tool during tightening. Its effectiveness depends on pocket depth, across-flats dimensions, corner geometry, copper condition, coating thickness and assembly torque. The recess does not, by itself, retain the fastener axially.
Material selection starts with the required conductivity, forming condition and joint design. Explore ourpure copper materialsfor the broader product range, or reviewC10200 oxygen-free copperwhen an oxygen-free grade is specified.
Key Features
| Feature | Practical Value |
|---|---|
| Hexagonal Fastener Recess | Provides a shaped seat intended to limit rotation of compatible hex hardware during tightening |
| Right-Angle Connection | Links perpendicular conductive interfaces in space-constrained assemblies |
| Recessed Fastener Seating | Can reduce fastener projection when pocket depth and hardware geometry permit |
| Drawing-Specific Hole Pattern | Matches busbar interfaces, mounting positions and required fastener sizes |
| Radiused Transition | Provides a controlled change in direction; bend radius is selected for the material and assembly |
| Rounded Edges and Corners | Reduces sharp-edge handling risks and supports consistent finishing |
| High-Conductivity Material Options | Allows selection of suitable ETP or oxygen-free copper according to the electrical specification |
| Optional Plating | Enables the contact finish to be matched to mating materials and service conditions |
A hexagonal recess does not automatically increase electrical clearance or creepage distance. These distances must be checked on the complete assembly, including installed hardware.
Manufacturing & Quality Control
The manufacturing route and inspection plan are selected according to part geometry, material condition, order quantity and fastening requirements.
Manufacturing Process
| Stage | Process and Control Focus |
|---|---|
| Drawing and Hardware Review | Confirm leg dimensions, contact areas, bend radius, hole pattern, hex fastener dimensions and installation access |
| Material Selection | Select the copper grade, temper and stock form against conductivity, forming and mechanical requirements |
| Blank Preparation | Cut and prepare suitable copper bar or strip; rounded-edge stock may be considered where appropriate |
| Right-Angle Forming | Control tooling, bend radius and material condition to achieve the specified angle and limit surface damage |
| Hexagonal Recess Production | Review precision coining or machining according to pocket depth, corner geometry, quantity and required fit |
| Hole Machining | Produce connection and locating holes with reference to the agreed datums and pocket position |
| Deburring and Contact-Face Finishing | Remove machining burrs and finish designated contact faces without altering critical dimensions |
| Optional Surface Treatment | Apply the specified coating after the appropriate forming and machining stages; allow for coating build-up in the pocket |
| Final Protection and Packing | Protect contact surfaces and separate parts to reduce scratching during handling and transport |
Drawing-specific recesses, holes and contact faces can be reviewed through ourcustom machining services. Available finishing routes are introduced on ourbusbar plating page.
Quality Control and Inspection
| Inspection Item | Method and Acceptance Basis |
|---|---|
| Material Identity | Review material documents and use grade-appropriate analytical verification where required |
| Oxygen-Free Grade Requirements | Confirm oxygen-related requirements through suitable certificates or dedicated testing; routine composition screening alone is insufficient |
| Electrical Conductivity | Test using an agreed method with suitable calibration, part geometry and temperature control |
| Hardness | Perform Vickers hardness testing when specified, using an agreed test location and load |
| Overall Dimensions | Check leg lengths, width, thickness, hole diameters and hole locations against the drawing |
| Hexagonal Recess Geometry | Inspect across-flats, depth, corner radii and remaining material thickness using suitable measuring equipment and gauges |
| Fastener Fit | Check actual nominated hardware, including relevant dimensional and coating tolerances |
| Anti-Rotation Performance | Conduct an agreed torque test where required; acceptance covers pocket deformation, fastener rotation and visible damage |
| Angle and Contact Faces | Inspect included angle, selected-face flatness and surface roughness where specified |
| Surface and Bend Condition | Inspect edges, transition regions and contact surfaces for unacceptable burrs, cracks or damage |
| Plating | Verify specified coating thickness, coverage and other order-specific acceptance requirements |
| Documentation and Traceability | Agree material records, batch identification, dimensional reports and any third-party inspection before production |
Inspection scope and sampling frequency are defined in the order requirements. EN 10204 3.1 documentation, where required and applicable, must be agreed before ordering.
See ourquality assurance proceduresfor further information on inspection and quality management.
Typical Applications
These are potential integration applications, subject to the equipment manufacturer's design review and validation.
| Application | Typical Use | Design Considerations |
|---|---|---|
| Molded-Case Circuit Breakers | Compact inlet or outlet terminal connections | Pocket strength, terminal temperature rise, fastener access and enclosure clearances |
| Air Circuit Breakers and Disconnectors | Right-angle connections between terminal pads and busbars | Short-circuit loading, joint pressure, conductor section and mechanical support |
| EV Battery Distribution Units | Bolted connections between internal busbars and electrical devices | Vibration, insulation coordination, thermal cycling and assembly sequence |
| High-Voltage DC Contactors | Connection adapters between contactor studs and busbar interfaces | Stud loading, installation torque, contact finish and system voltage |
| Energy-Storage PCS Equipment | Conductive links within power-conversion assemblies | Operating current, ventilation, temperature rise and service access |
| Industrial Control Cabinets | Custom right-angle power-distribution connections | Hole alignment, mating surfaces, fastening method and available installation space |
Frequently Asked Questions
It is a copper conductive component that joins interfaces positioned at approximately 90 degrees. This version includes a hexagonal fastener recess around one hole to accommodate compatible hex hardware. It is a bolted connection component, not a cable-crimp lug.
The recess provides a shaped seat that can restrain a matching bolt head or nut against rotation. Its performance depends on pocket dimensions, engagement depth, material condition and tightening torque. Axial fastener retention requires a separate feature or assembly arrangement.
It can, when the seated hardware is adequately restrained and the opposite side is accessible for tightening. Single-tool installation must be verified with the actual fastener, pocket geometry and assembly procedure. The recess alone does not guarantee wrench-free installation in every configuration.
C11000 is ETP copper, while C10200 and C10100 are oxygen-free grades with different specification requirements. Selection depends on conductivity, processing, service conditions and documentation needs. Material grades from different standards should not be treated as automatically interchangeable.
Yes, the design can be specified for either, but the dimensions must match the selected hardware. Bolt heads and nuts can differ in height, chamfer and tolerances. Provide the fastener standard, size and drawing before finalizing pocket dimensions.
These finishes can be reviewed according to the application. Specify coating type, thickness, contact areas and any masking requirements. Coating build-up must be included in the pocket-fit review, particularly where fastener clearance is small.
There is no single rating based on shape alone. Current capacity depends on conductor section, contact resistance, cooling and allowable temperature rise. Voltage suitability also depends on the complete insulation system, installed hardware, clearance, creepage and applicable equipment standards.
Send the drawing, copper grade and temper, quantity, leg dimensions, hole pattern, pocket dimensions, actual fastener details and surface finish. Include critical tolerances, torque requirements, operating conditions, inspection documents, destination and requested delivery schedule.
Request a Quote
| Required Information | Details to Provide |
|---|---|
| Drawing | Dimensioned 2D drawing and, where available, a 3D model |
| Material | Copper grade, material standard, temper and any conductivity or hardness requirement |
| Geometry | Leg lengths, width, thickness, bend radius and included angle |
| Connection Features | Hole sizes, hole pitch, datums and required contact areas |
| Hexagonal Recess | Across-flats, depth, corner requirements and remaining wall thickness |
| Fastener | Bolt or nut standard, size, dimensional drawing and intended tightening torque |
| Surface Finish | Bare copper or coating type, thickness, masking and contact-face requirements |
| Quantity | Prototype quantity, batch quantity and estimated annual usage |
| Operating Conditions | Current, voltage, temperature, vibration and installation environment |
| Inspection and Documents | Dimensional report, material documentation, functional testing and third-party inspection requirements |
| Delivery | Destination country, packaging requirements and requested schedule |
Contact Cymber Metal for a drawing-based quotationfor your custom L-shaped copper busbar connector.











