90-Degree GIS Elbow Contact Housing | Custom Busbar Connector
Video
Short Description
This custom 90-degree GIS elbow contact housing connects two perpendicular conductor paths through a cylindrical side branch and a stepped socket. The images show a large circular opening with internal shoulders, a perpendicular tubular section and a compact housing body.
Copper or aluminum alloy options may be considered according to the design and required properties. Bore geometry, dimensions, mounting details, surface finish and inspection criteria should be confirmed against the drawing and order specification. See ourPure CopperandAluminum Alloyranges for material options.
Product Overview
This GIS/GIL-style corner housing is designed for applications that require a 90-degree connection between perpendicular conductor paths. The supplied brief describes an internal stepped socket and a transverse tubular connection; the final geometry and intended equipment should be confirmed by drawing.
Key Features
- 90-degree layout for connecting perpendicular conductor paths.
- Stepped internal socket geometry can be specified to suit the mating component.
- Bore sizes, alignment, mounting details and external contour are drawing-dependent.
- Copper or aluminum alloy selection should follow the project’s electrical and mechanical requirements.
- Plating or other finishing options require confirmation for the selected substrate and application.
- System-level electrical performance and compliance must be assessed as part of the complete equipment assembly.
Manufacturing Process
| Stage | Description |
|---|---|
| Drawing and material review | Confirm the material, standard, geometry, critical dimensions and acceptance criteria |
| Blank and process planning | Select a suitable blank and manufacturing route for the specified material and part geometry |
| Bore and feature machining | Machine the perpendicular openings, stepped bore and specified mounting features |
| Deburring and cleaning | Define edge condition and cleanliness requirements for internal surfaces |
| Optional surface finishing | Review the requested coating or surface treatment for feasibility |
| Final inspection and packing | Inspect to the agreed plan and prepare the specified packing |
Custom machining requirements can be reviewed through ourFine Machiningservice page. The manufacturing route and achievable tolerances need confirmation against the part drawing.
Manufacturing & Quality Control
| Control Point | Order-Level Check |
|---|---|
| Material identity | Confirm grade, standard and supporting material documentation |
| Bore dimensions | Inspect the two openings and internal stepped features to drawing |
| Axis relationship | Check the specified perpendicularity, position and alignment criteria |
| Mounting details | Inspect holes and other features against the approved drawing |
| Internal surface condition | Check deburring and cleanliness requirements |
| Surface finish | Verify the specified treatment and any agreed coating requirements |
| Functional or electrical testing | Define test method, sampling and acceptance limits before production |
| Documentation | Agree material certificates and inspection records for the shipment |
For inspection methods and available documentation, see ourQuality Assurancepage. Product-specific testing and acceptance criteria are confirmed before order placement.
Typical Applications
| Application | Potential Use |
|---|---|
| GIS and C-GIS equipment | Corner connection housing for assemblies designed around the specified geometry |
| GIL systems | Elbow or expansion connection component, subject to system design |
| Circuit breakers | Contact housing near a conductor or bushing connection, where specified |
| Disconnectors | Housing for a matching conductor interface |
| Earthing switches | Connection component for a design using the specified socket geometry |
The application, voltage level, current rating, partial-discharge limits and compliance requirements must be verified against the complete equipment design. They cannot be established from the component photographs alone.
FAQ
It is a corner-style housing with conductor openings arranged at approximately 90 degrees. The supplied product brief describes a stepped socket and a perpendicular tubular section; exact interfaces should be confirmed on the drawing.
The brief lists copper grades C10200, C11000 and C18150, as well as several aluminum alloys. The correct material depends on the design requirements and governing specification. Confirm the selected grade and supporting documents before ordering.
The brief gives reference ranges for the mating bore, outer diameter and overall envelope. These are not guaranteed standard sizes; provide the drawing and critical dimensions for review.
Yes, the stepped bore and socket features can be defined by drawing. Please identify the mating component, critical fits and any inspection requirements.
Silver plating is listed in the supplied brief as a possible finish, but the photos do not confirm the product’s material or coating. Specify the substrate, areas to be plated and coating requirements for feasibility review.
The supplied brief references these standards, but no compliance evidence was provided. State the required standard and acceptance criteria in the inquiry. Compliance of the complete GIS/GIL assembly is not established by a component description alone.
The inspection scope and documents should be agreed for each order. Specify whether you require a material certificate, dimensional inspection report, coating record or functional test report.
Send the material and standard, 2D/3D drawing, bore dimensions, overall envelope, axis tolerances, finish, quantity, inspection documents and delivery destination.
Request a Quote
| Information Needed | Details to Provide |
|---|---|
| Material | Grade and applicable standard |
| Drawing | 2D/3D drawing with critical dimensions and tolerances |
| Geometry | Bore sizes, overall envelope and axis relationship |
| Features | Internal steps, mounting holes and other interfaces |
| Surface finish | Coating or treatment, including any area-specific requirements |
| Quantity | Order quantity and sample needs |
| Quality documents | Material certificate, inspection plan and required tests |
| Delivery | Destination, packing needs and target schedule |
Send the drawing and requirements throughContact Usfor review.










