L-Shaped Copper Flange Busbar Connector
Video
Short Description
Custom L-shaped copper flange busbar connector featuring an upright flange with a central bore and mounting-hole circle, combined with a stepped horizontal connection pad. The photographed design has eight flange mounting holes and four cylindrical counterbores on the pad. Material grade, bore fit, hole pattern, contact-face finish and optional plating are specified to match the approved drawing and mating assembly.
Copper Flange Busbar Connector Overview
A copper flange busbar connector provides a right-angle transition between a flange-mounted conductive interface and a flat busbar connection. Its upright flange and horizontal pad allow the two interfaces to be positioned on perpendicular planes.
The photographed component combines a large central bore, an eight-hole flange pattern, a stepped pad outline and four recessed fastening positions. The bore’s function—clearance, location or another specified fit—depends on the assembly drawing; the bore alone does not establish a clamping connection.
Cymber Metal supports drawing-based component review using suitablepure copper materials, including C11000 ETP copper andC10200 oxygen-free copper. Final material, manufacturing route and inspection requirements are confirmed for each project.
Key Features
| Feature | Product Detail |
|---|---|
| Right-Angle Connection Geometry | Upright flange and horizontal pad support a perpendicular conductive transition within the customer’s assembly. |
| Central Bore and Bolt Circle | Bore size, fit and mounting-hole positions can be defined around the mating conductor or flange interface. |
| Recessed Pad Fastening | Cylindrical counterbores accommodate specified fastener heads when pocket depth, screw dimensions and coating allowance are coordinated. |
| Stepped Pad Outline | Shoulder position, pad width and outer contour can be adapted to the approved assembly envelope. |
| Drawing-Based Contact Faces | Flatness, roughness and coating requirements can be assigned specifically to electrical contact surfaces. |
Manufacturing & Quality Control
The manufacturing route and inspection scope are established after reviewing the drawing, material condition and critical assembly requirements.
Manufacturing Process
| Stage | Process and Control |
|---|---|
| Material Selection | Select suitable copper grade, stock form and condition; review material documentation against the purchase specification. |
| Blank Preparation and Forming | Prepare the blank and, where the selected route uses forming, establish the right-angle geometry before final machining of critical interfaces. Bend radius and forming conditions require engineering review. |
| CNC Machining | Use appropriatecopper machining supportfor the central bore, flange mounting holes, pad counterbores, stepped contour and designated contact faces. |
| Deburring and Cleaning | Remove machining burrs, apply specified edge breaks and clean holes and contact surfaces before inspection or coating. |
| Surface Treatment | Review masking, coating system and thickness through the applicablebusbar plating process. Account for coating effects on fits and recessed fasteners. |
| Final Protection | Select packaging to protect machined faces, hole edges and finished surfaces during handling and transport. |
Inspection and Quality Control
Inspection methods, sampling and documentation should be agreed before production. Further information is available on ourquality assurance page.
| Inspection Item | Verification Approach |
|---|---|
| Material Identity | Review grade and heat/batch documentation; arrange appropriate composition testing when specified. Oxygen-content requirements need a suitable method rather than an assumption from general elemental screening. |
| Conductivity and Hardness | Verify specified properties using agreed methods, material condition, temperature reference and sampling requirements. |
| Bore and Hole Dimensions | Use suitable bore gauges, pin gauges or coordinate measurement for agreed diameters, fits and counterbore dimensions. |
| Hole Pattern and Orientation | Check bolt-circle geometry, pad-hole locations and flange-to-pad orientation against the drawing datum system. |
| Contact Faces | Measure specified flatness and roughness using suitable equipment and evaluation conditions. |
| Formed Region | Perform visual examination and, when required, an agreed penetrant or suitable ultrasonic inspection procedure. NDT scope and acceptance criteria must be defined. |
| Coating | Check specified coating thickness, coverage, masking and applicable adhesion requirements. |
| Traceability and Reports | Agree batch identification, dimensional reports and material documentation, including EN 10204 3.1 documentation where required and applicable. |
Typical Applications
These are potential applications requiring confirmation of the mating design, operating conditions and OEM acceptance.
| Application | Typical Use | Design Considerations |
|---|---|---|
| Vacuum Circuit Breaker Assemblies | Conductive transition between a terminal-side flange interface and a flat connection pad | Terminal arrangement, mounting loads, temperature rise, contact design and equipment qualification |
| GIS and Ring Main Units | Custom flange-to-busbar connections within an approved switchgear design | Electrical clearances, gas-system compatibility where relevant, coating and assembly tolerances |
| Air Circuit Breakers and Disconnectors | Right-angle connections between defined conductive interfaces | Fastener preload, thermal cycling, contact pressure and electrodynamic loading |
| Transformer Bushing Connections | Transition from a bushing-side interface to a flat busbar | Bushing loads, interface fit, allowable movement and contact-face requirements |
| Industrial Power Equipment | Drawing-specific copper adapters for perpendicular conductor layouts | Available space, cooling, mechanical support and operating duty |
FAQ
It is a conductive transition component combining a flange-style interface with a flat busbar connection. This design places the two interfaces at approximately 90 degrees.
C11000 ETP, C10200 oxygen-free and C10100 oxygen-free electronic copper can be reviewed. Grade selection depends on the electrical, mechanical, thermal and manufacturing requirements. These grades are not automatically interchangeable.
They describe the photographed component. Different hole counts, bolt-circle diameters, bore sizes and pad layouts can be reviewed against a customer drawing.
Not necessarily. A bore may provide clearance, location or a specified fit. Any gripping or clamping function requires a defined assembly, mating dimensions and fastening arrangement.
Yes, as drawing requirements for feasibility review. Bore fits, coordinate tolerances and GD&T position tolerances must be defined correctly, with appropriate datums and inspection conditions.
Only when the specified fastener head, counterbore diameter, recess depth and coating allowance are compatible. A recessed hole alone does not guarantee flush seating.
These finishes can be reviewed. The order should identify the coating system, thickness, contact areas, masking boundaries and any adhesion or environmental requirements.
No universal rating can be assigned from the photographs or shape alone. Suitability depends on conductor dimensions, contact resistance, cooling, insulation clearances, mechanical loads and validation of the complete equipment assembly.
Request a Quote
| Required Information | Details to Provide |
|---|---|
| Drawing | Dimensioned 2D drawing, revision and available 3D model |
| Material | Grade, standard, condition, conductivity and hardness requirements |
| Critical Geometry | Bore fit, bolt circle, counterbores, contact faces, datums and tolerances |
| Assembly | Mating components, fasteners, installation loads and application |
| Operating Conditions | Current, duty cycle, temperature limits and relevant equipment requirements |
| Surface Treatment | Coating type, thickness, masking and contact-surface requirements |
| Inspection | Required reports, traceability, sampling, certificates and third-party inspection |
| Purchasing Details | Quantity, repeat demand, destination, packaging and requested delivery date |
Contact Cymber Metal for a drawing-based quotationcovering material selection, machining feasibility, surface treatment and inspection requirements.









