Monoblock Slotted Tulip Contact Sleeve
Video
Short Description
This monoblock slotted tulip contact sleeve is a cylindrical plug-in contact component with axial slots that form flexible contact fingers. The pictured part also shows circumferential grooves and a mounting collar; final geometry should be confirmed against the product drawing.
Material, finger count, slot pattern, bore, mounting details and surface finish can be specified for the application. Copper-alloy options in the supplied brief include C10200, C10100, C11000 and C18150; confirm the selected grade and standard before ordering.
Key Features
- One-piece cylindrical sleeve with axial slots forming contact fingers.
- Circumferential grooves and mounting features can be designed to drawing.
- Finger count, bore geometry and slot pattern are project-specific.
- Copper and copper-alloy options can be reviewed against required electrical and mechanical properties.
- Plating or other surface-finish requirements should be defined in the specification.
- Product suitability depends on the mating conductor and switchgear design.
Manufacturing Process
| Stage | Description |
|---|---|
| Drawing and material review | Confirm grade, standard, geometry, tolerance and finish requirements |
| Turning and boring | Machine the sleeve body, bore and specified external features |
| Slot machining | Produce axial slots and finger geometry to the approved drawing |
| Deburring and cleaning | Define edge condition and cleaning requirements for the contact surfaces |
| Optional surface finishing | Apply the agreed coating or finish, if specified and confirmed |
| Final inspection | Check the agreed dimensions, features and documentation before shipment |
Manufacturing & Quality Control
| Control Point | Order-Level Review |
|---|---|
| Material identity | Verify selected grade and supporting material documents |
| Bore and outer geometry | Inspect dimensions and tolerances stated on the approved drawing |
| Slots and fingers | Check slot count, width, position and finger geometry to agreed criteria |
| Grooves and mounting features | Inspect groove dimensions and hole locations against drawing |
| Surface condition | Review deburring, cleanliness and specified coating or finish |
| Functional testing | Define any insertion-force, contact-resistance or other test requirements before production |
| Documentation | Agree required material certificates and inspection records |
For inspection methods and available documentation, see ourQuality Assurancepage. Product-specific testing and acceptance criteria are confirmed before order placement.
Typical Applications
| Application | Potential Use |
|---|---|
| GIS and C-GIS equipment | Plug-in contact component for assemblies designed around the specified sleeve |
| Withdrawable switchgear | Tulip-style contact in a compatible plug-in connection |
| Circuit breakers | Contact sleeve for a matching pole or connection design |
| Disconnectors and earthing switches | Contact component where the equipment design calls for this geometry |
| Custom electrical assemblies | Cylindrical multi-finger contact made to an approved drawing |
The images do not establish a voltage rating, current rating or compliance status. Confirm the complete assembly requirements and applicable tests with the equipment designer.
FAQ
It is a cylindrical contact component with axial slots that divide part of the sleeve into flexible fingers. The exact mating geometry and performance requirements depend on the equipment design.
The supplied product brief describes a monoblock design. Confirm the construction and drawing for the specific part before publishing or ordering.
The supplied brief lists C10200, C10100, C11000 and C18150, among other options. Choose the grade according to the required standard and application; do not treat grade equivalents as automatic substitutions.
The brief lists several finger-count and slot-width options. Final dimensions, slot pattern and tolerances need to be reviewed against the drawing.
No spring is visible in the supplied images. The sleeve shows circumferential grooves, but whether springs are required or supplied must be confirmed separately.
The image alone cannot establish the coating. Silver plating is listed in the supplied product brief as an option; confirm the finish and coating requirements for this item.
The provided text references IEC 62271, but the images do not demonstrate compliance. Specify the applicable equipment standard and test requirements, then confirm the product and assembly qualification before making a compliance claim.
Send the material grade and standard, 2D/3D drawing, bore and outer dimensions, slot and finger details, groove and mounting requirements, finish, quantity, inspection documents, destination and target schedule.
Request a Quote
| Information Needed | Details to Provide |
|---|---|
| Material | Grade and applicable standard |
| Drawing | 2D/3D file with critical dimensions and tolerances |
| Geometry | Bore, OD, length, slot count and finger arrangement |
| Features | Spring grooves, lead-in, contact band and mounting holes |
| Surface finish | Coating type and required specification |
| Quantity | Order quantity and any sample requirement |
| Quality documents | Material certificate, inspection plan and any agreed testing |
| Delivery | Destination, packing requirements and target schedule |
Send the drawing and requirements throughContact Usfor review.









