Custom T-Shaped Copper GIS Contact Socket Assembly

Short Description:

Item Specification
Product T-Shaped Copper Contact Socket Assembly
Material Copper grade, standard and condition to be specified and confirmed for the order
Assembly Geometry Hollow cylindrical sleeve connected to a perpendicular rectangular stem
Sleeve Bore Internal bore with visible annular grooves or stepped features; profile per drawing
Stem Rectangular section; dimensions and protruding length per drawing
Stem End Two threaded holes visible; thread type, size and pitch per drawing
Joining Method To be confirmed from design and order requirements
Dimensions According to approved 2D or 3D drawing
Tolerances Critical dimensions and general tolerances to be agreed from the drawing
Surface Condition As specified; deburring and finish requirements to be confirmed
Plating Optional only by agreement; coating type, coverage and thickness to be specified
Electrical Rating Requires validation for the full assembly and operating conditions
Inspection Scope and sampling plan to be agreed for the order
Documentation Material and dimensional records subject to order requirements

Product Detail

Product Tags

Video

Short Description

Cymber Metal supplies custom T-shaped copper contact socket assemblies with a hollow cylindrical sleeve and a perpendicular rectangular stem. The sleeve shown has internal annular grooves or steps, while the stem end has two threaded holes.

Material grade, sleeve dimensions, groove profile, thread specification and joining method should be confirmed against the approved drawing. Electrical rating and suitability depend on the complete contact assembly and operating conditions.

Product Overview

This component combines a hollow cylindrical contact sleeve with a rectangular stem at a right angle. The visible internal grooves may be designed to accommodate a contact element, but their intended function and mating details should be confirmed from the equipment drawing.

Copper grade and source form should be specified for the application. See ourPure Copperrange for related copper materials. Custom machining and drawing review can also be discussed through ourFine Machiningcapability.

Key Features

Feature Description
T-shaped layout Connects a cylindrical sleeve and a perpendicular rectangular stem.
Hollow sleeve Provides a bore for a mating contact or component, subject to equipment design.
Internal grooves Annular features are visible inside the sleeve; dimensions and function are drawing-defined.
Dual threaded holes Two threaded holes are visible on the stem end face.
Custom joining interface The connection between sleeve and stem should follow the specified design and joining method.

Manufacturing Process

Stage Scope
Drawing Review Confirm material, sleeve bore and groove profile, stem geometry, thread details and mating requirements.
Component Preparation Prepare the sleeve and stem stock according to the agreed material specification and design.
Sleeve Machining Machine the bore, internal grooves or steps, and outside features to the drawing.
Stem Machining Produce the rectangular stem and end-face threads to the specified dimensions.
Joining or Integrated Machining Select the joining route or integrated design based on the drawing and feasibility review; the process is not confirmed by the photos.
Finishing Deburr and clean; apply plating only if required by the order.
Final Inspection Check agreed critical dimensions, internal features, thread details and joining interface.

Manufacturing & Quality Control

Control Stage Review or Inspection
Drawing and Feasibility Review Review material, mating interface, groove geometry, threads and joining design before production.
Material Verification Confirm grade and supporting records according to the purchase specification.
Dimensional Inspection Check agreed sleeve, bore, groove, stem and thread dimensions against the drawing.
Thread Inspection Confirm thread type and acceptance requirements; gauges or other checks to be agreed for the order.
Interface Inspection Inspect the sleeve-to-stem interface according to the selected joining method and agreed acceptance criteria.
Surface and Edge Inspection Check for burrs and visible surface condition against the specified requirements.
Documentation Material certificates, dimensional reports and additional test records are subject to order agreement.

For inspection methods and available documentation, see ourQuality Assurancepage. Product-specific inspection scope and acceptance criteria should be agreed before order placement.

Typical Applications

Potential Application Possible Use Design Checks
GIS equipment Contact socket or transition node in a specified assembly Equipment interface, contact element, insulation design and rating
Circuit breakers Socket or terminal component for a drawing-specific breaker design Mating contact geometry, duty cycle and OEM requirements
Disconnector assemblies Fixed contact or connection interface, subject to design Movement, contact engagement and operating conditions
Power distribution equipment Custom transition between a cylindrical interface and busbar stem Current duty, temperature limits, mounting and clearances

These are potential application contexts, not confirmed equipment approvals or ratings. Final suitability should be validated by the equipment designer or OEM.

FAQ

What is a T-shaped copper contact socket?

It is a contact component with a hollow cylindrical sleeve and a perpendicular stem. This pictured design also shows internal sleeve grooves and two threaded holes at the stem end.

What are the internal grooves for?

They may accommodate a mating contact element, but their exact purpose and dimensions cannot be established from the photos alone. Please provide the mating-part or equipment drawing.

Are the sleeve and stem brazed together?

The photographs show an interface between the sleeve and stem, but they do not establish the joining process. The required joining method should be specified or confirmed during drawing review.

Can the sleeve bore and groove pattern be customized?

Yes. Bore diameter, groove profile, sleeve length and mating dimensions can be reviewed against your drawing.

Can the two stem holes be tapped to a specific thread?

Yes. Specify thread standard, size, pitch, depth and position on the drawing.

Which copper grade should I choose?

Provide the required grade and standard if known. The final material should be selected according to electrical, mechanical, forming, joining and operating requirements.

Is this suitable for a specific GIS or circuit-breaker rating?

That cannot be determined from the photographs or material description alone. The complete assembly must be reviewed against the equipment design and applicable requirements.

What information is needed for a quotation?

Please provide the drawing, material specification, quantity, critical tolerances, joining and finish requirements, application conditions, inspection needs and destination.

Request a Quote

Please Provide Details
Drawing 2D or 3D drawing showing sleeve, bore, grooves, stem and interface
Material Grade, standard and material condition
Quantity Sample, prototype and production quantities, if applicable
Threads Standard, size, pitch, depth and position
Joining and Finish Required joining process, surface finish and any plating
Inspection and Documents Required checks, reports and material records
Application and Delivery Equipment context, operating conditions, destination and target schedule

Send your drawing and requirements throughContact Usfor a material and manufacturing review.


  • Previous:
  • Next:

  • Write your message here and send it to us