Inverted T-Section Copper Stationary Contact Block
Video
Short Description
This inverted T-section copper stationary contact block is designed for drawing-defined plug-in and bolted electrical assemblies. The visible geometry includes a vertical blade section, a horizontal mounting base, rounded external edges and drilled mounting holes.
The component can be reviewed in C11000, C10200 or C10100 copper, with optional silver, tin or nickel plating according to the required contact surface, environment and assembly specification. Final material grade, dimensions, hole design, tolerances and finish should be confirmed by drawing.
Product Overview
An inverted T-section copper stationary contact block combines an upright contact blade with a horizontal mounting base. This structure can provide a compact interface for switchgear, disconnectors, earthing switches and other electrical assemblies where the contact position and mounting direction are fixed.
The photographs show a solid copper-colored part with a vertical blade, a horizontal base and rounded outer corners. Mounting holes are visible in the base and blade areas. The final hole type, whether through-hole, counterbore or tapped hole, must be defined by the approved drawing.
The upright blade can be specified with a rounded crest, lead-in chamfer or other engagement geometry when required by the mating contact. The base can also be customized with mounting holes, threaded features, counterbores or additional locating details.
For material selection, buyers can review Cymber Metal’spure copper products. For custom hole patterns, profile finishing and drawing-based production, see ourfine machining service.
The component should be evaluated as part of the complete electrical assembly. Current rating, temperature rise, contact resistance, dielectric clearance and short-circuit performance depend on the mating contact, mounting hardware, clamping force and equipment design.
Key Features
| Feature | Design Detail / Buyer Benefit |
|---|---|
| Inverted T-Section | Combines a vertical contact blade with a horizontal mounting base in a compact profile. |
| Solid Copper Body | Provides a continuous conductive body when the approved production route is a monoblock design. Final construction should be confirmed in the order documents. |
| Rounded Contact Crest | A rounded blade crest can help match the mating contact geometry and reduce sharp transitions. |
| Lead-In Chamfer | A drawing-defined chamfer can support guided engagement with a mating spring, tulip or blade contact. |
| Reinforced Blade Root | The transition between the blade and base can be shaped to meet mechanical support and clearance requirements. |
| Multiple Mounting Options | Holes, counterbores or internal threads can be customized according to the mating assembly. |
| Rounded External Corners | Edge radii can be specified for handling, clearance and surface finishing requirements. |
| Surface Treatment Options | Silver, tin or nickel plating can be considered for contact, environmental or wear-related requirements. |
| Drawing-Based Production | Blade height, thickness, hole spacing, base dimensions and finish can be tailored to the equipment interface. |
Manufacturing Process
The final process depends on the specified copper grade, temper, dimensions and tolerance. A near-net T-profile followed by CNC finishing is one possible production route.
| Stage | Process | Main Control Points |
|---|---|---|
| Drawing Review | Review the 2D drawing, 3D model and mating contact information. | Blade geometry, base size, hole pattern, datums and critical tolerances |
| Material Preparation | Select and cut suitable copper profile or copper stock. | Grade, condition, cross-section and machining allowance |
| Profile Forming | Produce or prepare the inverted T-section blank where required. | Section accuracy, straightness, surface condition and material utilization |
| Cut to Length | Cut the profile to the required length. | Length tolerance, squareness and burr control |
| CNC Machining | Finish the blade crest, chamfers, root transitions and mounting features. | Perpendicularity, hole position, profile dimensions and surface finish |
| Thread or Counterbore Machining | Add internal threads, counterbores or other mounting details when specified. | Thread size, depth, gauge acceptance and mating hardware |
| Deburring | Remove machining burrs from holes, edges and contact areas. | Edge radius, cleanliness and absence of loose burrs |
| Surface Treatment | Apply anti-tarnish treatment or specified plating. | Coating coverage, thickness, masking and adhesion requirements |
| Final Inspection | Inspect the finished contact block against the approved drawing. | Dimensions, holes, flatness, finish, material records and packaging |
For copper contact components requiring plated surfaces, Cymber Metal’sbusbar plating shopcan be referenced when discussing coating feasibility. Plating areas, thickness and masking should be agreed before production.
Manufacturing & Quality Control
The following inspection plan can be adapted to the customer’s drawing and equipment requirements.
| Inspection Item | Method / Control Approach | Acceptance Basis |
|---|---|---|
| Material Grade | Review material certificate and perform composition verification where required. | Ordered grade and applicable material standard |
| Conductivity | Use an agreed conductivity or resistivity test method with calibrated equipment. | Grade-specific value stated in the purchase specification |
| Overall Dimensions | Measure base length, width, height and blade thickness. | Approved drawing and datum system |
| Blade Profile | Check crest radius, chamfer, lead-in geometry and root transition. | Drawing-defined profile requirements |
| Perpendicularity | Use a coordinate measuring machine or suitable dimensional fixture. | Blade-to-base perpendicularity tolerance |
| Mounting Holes | Check hole diameter, position, spacing, depth and counterbore or thread details. | Mating assembly requirements |
| Thread Inspection | Use calibrated thread plug gauges where internal threads are specified. | Applicable thread standard and gauge acceptance |
| Base Flatness | Check the conductive mounting face on a suitable reference surface or measurement system. | Drawing-defined flatness requirement |
| Surface Roughness | Measure specified blade or mounting surfaces using a profilometer. | Required Ra value on designated areas |
| Hardness | Conduct Vickers hardness testing at agreed locations. | Material temper and purchase specification |
| Plating | Check coating thickness, coverage, adhesion and appearance where applicable. | Agreed coating standard and order requirements |
| Surface Quality | Visual inspection for scratches, cracks, burrs, dents and contamination. | Approved visual acceptance criteria |
| Documentation | Provide agreed material, dimensional and surface-treatment reports. | Purchase order and inspection-plan requirements |
| Assembly Testing | Arrange contact-resistance, temperature-rise or equipment-level tests when required. | Complete assembly qualification plan |
Cymber Metal’sQuality Assurancepage can be used as a supporting quality reference. Certificates and inspection documents should be confirmed according to the actual order.
Typical Applications
These are potential application areas for engineering review, not guaranteed equipment ratings.
| Application | Potential Component Role | Points to Confirm |
|---|---|---|
| Draw-Out Switchgear | Stationary plug-in contact block for a withdrawable conductive interface | Mating contact type, insertion force, clearances and current duty |
| Indoor Disconnectors | Fixed blade contact or stationary conductive seat | Contact geometry, operating travel and insulation coordination |
| Earthing Switches | Stationary contact interface for the earthing path | Fault-current requirements, mechanical endurance and grounding design |
| Motor Control Centers | Compact fixed contact for plug-in feeder or busbar assemblies | Feeder arrangement, thermal loading and mounting access |
| Air Circuit Breakers | Conductive terminal or fixed blade interface | Breaker manufacturer geometry, joint resistance and temperature rise |
| Energy Storage Cabinets | Custom contact block for internal power connections | DC current, insulation, vibration and thermal cycling |
| Industrial Power Supplies | Fixed copper contact for a high-current internal connection | Current waveform, frequency, enclosure conditions and service environment |
Frequently Asked Questions
It is a copper electrical component with a vertical contact blade and a horizontal mounting base. The inverted T profile provides a compact way to combine a plug-in or blade interface with a fixed mounting surface.
No. It is a component used within a larger electrical assembly. The mating contact, insulation, mounting hardware, current path and equipment qualification determine the final performance.
C11000, C10200 and C10100 can be considered for pure copper contact components. The correct choice depends on conductivity, forming requirements, operating temperature, surface treatment and certification needs. The final grade should be confirmed against the customer’s standard.
Yes. Hole diameter, spacing, depth, counterbore, thread type and location can be defined on the drawing. The photographs show visible holes, but they do not establish whether every feature is threaded or through-machined.
Yes. Blade height, thickness, crest radius, chamfer and root geometry can be customized for the mating spring, tulip or knife contact. The available tolerance depends on the material condition and manufacturing route.
Silver plating can be reviewed for specified contact surfaces. The drawing should define plated areas, nominal thickness, masking, adhesion and inspection requirements. Plating does not by itself establish the contact resistance of the complete assembly.
It may be considered for suitable equipment after technical review. Current, voltage, temperature rise, creepage, clearance, short-circuit forces and mechanical endurance must be evaluated at the assembly level before selection.
Please provide the drawing or 3D model, copper grade, dimensions, hole and thread details, mating contact information, quantity, surface treatment, inspection documents and destination. These details allow the production route and acceptance criteria to be reviewed accurately.
Request a Quote
| Required Information | Details to Include |
|---|---|
| Drawing / 3D Model | Dimensioned PDF drawing and STEP or equivalent model |
| Copper Grade | C11000, C10200, C10100 or another specified grade |
| Profile | Base size, blade height, blade thickness and root geometry |
| Mounting Details | Hole diameter, spacing, thread, counterbore and depth |
| Contact Geometry | Crest radius, lead-in chamfer, contact length and mating part |
| Tolerances | Perpendicularity, flatness, position, surface roughness and profile tolerances |
| Surface Treatment | Bare copper, anti-tarnish, silver, tin or nickel plating |
| Quantity | Prototype quantity, production batch and expected annual demand |
| Application | Switchgear, disconnector, earthing switch, MCC or other equipment |
| Inspection Documents | Material certificate, dimensional report, plating report or third-party inspection |
| Delivery Details | Destination, packaging and requested delivery schedule |
Contact Cymber Metal for a drawing-based quotation. Please send the drawing and mating-interface requirements so material, machining, finishing and inspection can be reviewed together.










