Custom Copper-Aluminum Bimetal Transition Disc
Video
Short Description
A copper aluminum bimetal disc is a conductive transition component with a copper-facing layer and an aluminum-facing layer. It is designed for drawing-specific joints between copper and aluminum conductors, including busbars, switchgear connections, battery terminals and power-distribution assemblies.
Cymber Metal can supply solid discs, center-hole washers and custom cut profiles fromcopper-aluminum composite materials. Diameter, total thickness, layer ratio, hole pattern, flatness, surface treatment and interface-test requirements are confirmed from the customer drawing and order specification. Relatedcopper-aluminum bimetallic washersare also available for project review.
Key Features
- Copper and aluminum contact surfaces combined in one transition component.
- Solid-disc, washer and custom-outline options for different joint designs.
- Custom diameter, thickness, layer ratio, hole pattern and edge finish.
- Cutting, deburring, leveling and secondary machining available to drawing.
- Optional anti-tarnish treatment or silver, tin and nickel plating.
- Bond and dimensional acceptance criteria agreed before production.
Manufacturing & Quality Control
| Stage | Control Point |
|---|---|
| Drawing Review | Confirm disc geometry, layer orientation, copper and aluminum grades, joint design, tolerances, quantity and service conditions |
| Composite Material Selection | Select the bonded sheet construction and layer ratio according to electrical, mechanical, thermal and joining requirements |
| Bonding Route | Use an agreed composite-material route, such as roll bonding, when specified and supported by the selected material system |
| Cutting & Forming | Produce discs or washers by blanking, stamping, laser cutting or CNC profile cutting according to diameter, thickness and volume |
| Leveling & Edge Finishing | Control specified flatness, remove burrs and add chamfers or finish-machined edges where required |
| Secondary Processing | Add holes, slots, grooves or counterbores withcopper machining support |
| Surface Treatment | Clean and protect the surfaces; apply optional plating or anti-tarnish treatment |
| Inspection | Verify dimensions, layer thickness, surface condition and agreed bond or interface properties |
| Documentation & Packing | Prepare specified inspection records and protect finished surfaces during transport |
For inspection methods and available documentation, see ourQuality Assurancepage. Product-specific testing and acceptance criteria are confirmed before order placement.
Typical Applications
- Copper-to-aluminum busbar transition joints in switchgear and distribution equipment.
- Conductive transition washers for substations, control cabinets and power systems.
- Battery terminal and busbar interfaces for EV and battery energy storage assemblies.
- Connection components for inverters, converters and renewable-energy equipment.
- Custom electrical transition joints where copper and aluminum conductors meet.
Final suitability depends on current, temperature rise, contact pressure, joint preparation, sealing, fastener design, coating system and environmental exposure. The complete connection should be reviewed against the customer drawing and applicable equipment standard.
Frequently Asked Questions
It is a layered transition component with a copper-facing surface and an aluminum-facing surface. Each side can be joined to the corresponding conductor material, helping create a controlled transition between copper and aluminum.
A solid copper disc uses one material throughout. A copper-aluminum bimetal disc combines two materials and is intended for transition-joint designs where one side connects to copper and the other to aluminum.
Yes, but the complete joint must be engineered correctly. Contact area, fastener load, surface preparation, layer orientation, sealing, temperature rise and environmental exposure should be specified before approval.
Typical copper options include C11000, C10200 and C10100. Aluminum options may include 1050, 1060, 1070, 1100, 3003 or 6061. The final combination depends on availability, bonding compatibility and application requirements.
Yes. The component can be supplied as a solid disc, center-hole washer, annular ring or custom outline. Bolt holes, slots, flats, grooves, counterbores, chamfers and identification marks can be added.
Depending on the order specification, inspection may include visual interface checks, layer-thickness measurement, bend or peel testing, metallographic examination, ultrasonic inspection or another customer-approved method.
Diameter, thickness, flatness, burr height and hole-position tolerances are reviewed against the manufacturing route and part size. Material certificates, dimensional reports and relevant bond or coating records can be supplied as agreed.
Please provide the drawing, copper and aluminum grades, layer orientation and ratio, dimensions, tolerances, quantity, joining method, operating conditions, surface treatment, inspection requirements and destination.
Request a Quote
Please send:
- 2D drawing with diameter, thickness, holes and critical tolerances.
- Copper grade, aluminum grade, layer orientation and required layer ratio.
- Joint design, joining process and intended conductor materials.
- Order quantity, annual demand and sample requirements.
- Flatness, burr, surface finish and plating requirements.
- Required bond, interface, conductivity or dimensional tests.
- Application, operating current, temperature and environment.
- Documentation, packing, destination and requested delivery schedule.
Contact Cymber Metalfor material selection, manufacturability review and quotation.









