Custom Stepped Copper Busbar with Raised Center Boss

Short Description:

Item Specification
Product Custom Stepped Copper Busbar with Raised Center Boss
Profile Wide flat section with a thicker center boss, thinner side wings and sloped or radiused transitions
Typical Grades C11000, C10200 or C10100 pure copper; C10400/C10700 silver-bearing copper and C18150 CuCrZr available after material review
Applicable Standards ASTM B187/B187M, ASTM B152/B152M, EN 13601 or EN 13605, depending on the material form, production route and agreed order specification
Overall Profile Width 10–260 mm; subject to profile and tooling review
Thin Wing Thickness 1.5–40 mm; customized to drawing
Center Boss Total Thickness 3–80 mm; customized to drawing
Supply Length Cut blocks 15–600 mm or straight bars 1,000–6,000 mm; subject to section and shipping review
Material Condition Annealed, cold-worked or other agreed condition according to grade and drawing requirements
Production Route Extrusion and drawing, CNC profile machining, or a combined route selected after manufacturability review
Surface Drawn or machined finish; optional anti-tarnish protection, silver plating, tin plating or nickel plating
Custom Processing Cutting, drilling, milling, punching, chamfering, deburring and local surface finishing
Tolerance Profile dimensions, straightness, flatness and surface requirements according to the approved drawing and manufacturability review
Inspection Chemical analysis, conductivity, hardness, profile dimensions, straightness, flatness, surface condition and coating thickness as specified
Documentation Material test certificate, process records, dimensional report and coating report available according to the agreed order specification
Compliance RoHS and REACH documentation available subject to material and order confirmation

Product Detail

Product Tags

Video

Short Description

This custom stepped copper busbar features a raised center boss, thinner side wings and controlled transition areas. The profile can be supplied as straight bar or cut components for switchgear contacts, power-module baseplates, battery systems and other electrical or thermal interfaces, subject to drawing and application review.

Availablepure coppergrades include C11000, C10200 and C10100. C10400/C10700 silver-bearing copper or C18150 chromium-zirconium copper can be reviewed as separate material options. Depending on the cross-section, tolerance and order volume, production may use extrusion and drawing, CNC profile machining, or a combined route withCNC machining support.

Key Features

  • Raised center boss and thin side wings integrated into one custom cross-section.
  • Near-net profile options can reduce downstream machining for suitable quantities and tolerances.
  • Multiple copper grades can be reviewed against conductivity, strength and temperature requirements.
  • Cut-to-length, holes, grooves, chamfers and other drawing-defined features are available.
  • Optional silver, tin or nickel plating can be specified.
  • Inspection scope and acceptance criteria are agreed before production.

Manufacturing & Quality Control

Stage Control Point
Drawing Review Confirm cross-section, boss geometry, wing thickness, transition radii, critical tolerances, application and quantity
Material Selection Select the copper grade, condition and specification according to conductivity, strength and service requirements
Profile Production Use extrusion and drawing, CNC machining, or a combined route according to geometry, tolerance, tooling feasibility and volume
Secondary Processing Cut to length and add holes, grooves, chamfers, pockets or other features required by the drawing
Surface Treatment Clean and protect the copper surface; apply optional silver, tin or nickel plating when specified
Inspection Check profile dimensions, straightness, flatness, surface condition and selected material properties
Documentation & Packing Prepare specified records and protect finished surfaces for storage and export transport

For inspection methods and available documentation, see ourQuality Assurancepage. Product-specific testing and acceptance criteria are confirmed before order placement.

Typical Applications

  • Stationary contact bars and conductive profiles for switchgear, ACB and MCCB assemblies.
  • Copper baseplates or heat-spreader profiles for IGBT and SiC power modules.
  • Custom busbar components for EV battery packs and battery energy storage systems.
  • Conductive sections for motors, generators, inverters and power-distribution equipment.
  • Other drawing-specific electrical or thermal interfaces requiring a stepped copper cross-section.

Final suitability depends on current, allowable temperature rise, joint design, mechanical load, coating system and equipment standards. These conditions should be reviewed with the customer drawing.

Frequently Asked Questions

What is a stepped copper busbar with a raised center boss?

It is a custom copper conductor with a thicker central platform and thinner side sections. The boss can provide a defined mounting, contact or thermal interface, while the side wings connect the profile to the surrounding assembly.

Which copper grades are available?

Typical options include C11000, C10200 and C10100. C10400 or C10700 silver-bearing copper may be considered where improved softening resistance is required. C18150 CuCrZr is reviewed separately for higher strength or temperature resistance.

Is the profile extruded, cold drawn or machined?

The route depends on geometry, tolerance, order quantity and tooling feasibility. Repetitive volumes may suit extrusion and drawing, while prototypes or complex low-volume parts may be CNC machined. A combined route is also available.

Can the boss height and wing thickness be customized?

Yes. Overall width, boss width and height, wing thickness, transition angle, radii and edge details can be produced according to an approved 2D or 3D drawing.

Can you supply long profiles and finished cut parts?

Yes. Depending on the cross-section and logistics, the product can be supplied as straight profile bars or finished cut blocks. Saw cutting, milling, drilling, punching, chamfering and deburring can be added.

Are silver, tin or nickel coatings available?

Yes. Full or selective plating can be reviewed. Please specify the coating material, thickness, coated area, masking zones and required inspection standard.

What tolerances and inspection documents can be provided?

Tolerance depends on profile size, production route and material condition. Available inspections may include composition, conductivity, hardness, dimensions, straightness, flatness and coating thickness. MTCs and dimensional reports can be supplied as agreed.

What information is required for a quotation?

Please provide the drawing, copper grade, applicable standard, material condition, critical tolerances, supply length, quantity, annual demand, machining or plating requirements, application, inspection documents and destination country.

Request a Quote

Please send:

  • 2D drawing with the complete cross-section and critical tolerances.
  • 3D model if pockets, holes or complex features are required.
  • Copper grade, applicable standard and material condition.
  • Bar length or finished-part dimensions.
  • Order quantity and estimated annual demand.
  • Conductivity, hardness, flatness and straightness requirements.
  • Machining, plating, masking and inspection requirements.
  • Application, operating current or temperature, destination and delivery schedule.

Contact Cymber Metalto review material selection, manufacturing feasibility and inspection requirements before ordering.


  • Previous:
  • Next:

  • Write your message here and send it to us