Pure Copper Knife Contact Blade

Short Description:

Specification Details
Product Name Pure Copper Inverted T-Section Guided Knife Contact Blade
Product Type Custom conductive contact blade / stationary knife contact
Material Options C11000, C10200, C10100, Cu-ETP, Cu-OF, T2, TU1 or TU2
Optional Materials C10400/C10700 silver-bearing copper or C18150 CuCrZr, subject to technical review
Material Standards ASTM B187/B187M, ASTM B152/B152M, ASTM B133, EN 13601, EN 13605, JIS H3140, JIS H3250 or GB/T 5585
System-Level References IEC 62271 and IEC 61439 where applicable to the complete switchgear design
Manufacturing Route Profile extrusion, cold drawing, forging, CNC machining or combined production route
Base Flange Width Approximately 15–180 mm
Blade Height Approximately 20–200 mm
Blade/Web Thickness Approximately 3–35 mm
Base Flange Thickness Approximately 2.5–30 mm
Cut Length Approximately 20–800 mm
Standard Bar Length Approximately 1,000–6,000 mm
Tip Geometry Symmetrical wedge, double-beveled tip, single-radius bullet tip or full-radius bullnose
Edge Treatment Sharp functional lead-in edge, controlled radius or rounded edge according to drawing
Temper H02, H04 or other customer-specified condition
Indicative Hardness Approximately 95–125 HV, subject to grade and temper
Conductivity Target up to or above 98% IACS for applicable pure copper grades; verify by grade and test method
Blade Thickness Tolerance Typical target ±0.02–0.04 mm
Blade-to-Base Perpendicularity Typical target ≤0.02–0.03 mm
Contact-Face Roughness Typical target Ra ≤0.2–0.4 μm
Surface Options Bright copper, anti-tarnish treatment, silver plating, tin plating, nickel plating or anti-galling coating
Silver Plating Approximately 10–30 μm when specified; ASTM B700 or customer specification
Tin Plating Available according to order requirement; ISO 2093 can be referenced
Nickel Plating Available according to application; ISO 1456 can be referenced
Inspection Documents MTC, chemical analysis, conductivity, hardness, dimensional report and plating records when specified
Final Requirement All dimensions and tolerances are subject to the approved 2D/3D drawing and manufacturability review

Product Detail

Product Tags

Video

Short Description

Cymber Metal supplies custom high-conductivity pure copper knife contact blades with an inverted T-section and guided lead-in tip. The profile can be cold-drawn, precision-extruded, machined or cut to length according to the approved drawing.

The contact blade is designed for conductive mating assemblies in draw-out switchgear, disconnectors, busway systems, energy-storage equipment and other high-current electrical applications.

Product Overview

This inverted T-section pure copper contact blade combines a conductive base flange with a guided blade or knife-tip section. The lead-in geometry can support smoother alignment and insertion during mating, while the copper base provides a low-resistance current path.

Available materials may include C11000 ETP, C10200 OFC, C10100 OFHC, Cu-ETP, Cu-OF, T2, TU1 and TU2. Silver-bearing copper and CuCrZr options can be evaluated when the application requires higher softening resistance, wear resistance or thermal performance.

For standard copper grades and conductive profiles, see ourPure Copperproduct range. Custom profile forming can be reviewed throughCustom Copper Profile Extrusion, while final cutting, drilling, milling and dimensional finishing can be handled throughFine Machining.

Key Features

Feature Buyer Value
High-Conductivity Copper Supports low-resistance current transfer in conductive contact assemblies.
Inverted T-Section Provides a stable mounting base with a raised conductive blade section.
Guided Lead-In Tip The tapered or rounded tip can support easier alignment during insertion.
Custom Cross-Section The profile can be developed around the required jaw, slot or busbar interface.
Precision Contact Surface Controlled machining and finishing help improve mating consistency.
Flexible Surface Treatment Silver, tin, nickel or anti-galling coatings can be reviewed for the operating environment.
Cut-to-Length Supply Long profiles can be supplied as bars or finished contact blocks according to the drawing.
Application-Specific Processing CNC milling, drilling, chamfering, deburring and other secondary operations are available for review.
Traceable Material Material grade, heat information and inspection records can be linked to the finished part.
Design Review Support Critical dimensions, insertion direction, clearance and mating-jaw conditions can be checked before production.

Manufacturing & Quality Control

The manufacturing route is selected according to the cross-section, conductivity requirement, dimensional tolerance, quantity and application. A cold-drawn or extruded profile may be followed by precision machining and finishing.

Manufacturing Process

Process Stage Manufacturing Control Expected Output
Material Selection Grade, purity, temper and certificate requirements are reviewed before production. Approved copper material with traceable heat information
Alloy Melting and Casting Chemical composition and internal soundness are controlled according to the selected grade. Dense copper billet, slab or bar stock
Profile Forming Extrusion, drawing or forging produces the inverted T-section blank. Consistent base flange and blade geometry
Cold Drawing or Sizing Controlled reduction improves dimensional stability, straightness and surface quality. Refined profile with controlled cross-section
Solution or Stress Relief Treatment Heat treatment is selected when required by material grade and temper. Stable mechanical and electrical properties
CNC Machining Milling, turning, drilling, slotting, chamfering and deburring are performed according to drawing. Finished contact geometry and mating features
Tip Finishing Wedge, radius, bullnose or lead-in geometry is finished to the approved profile. Controlled insertion tip and contact edges
Surface Treatment Anti-tarnish, silver, tin, nickel or anti-galling treatment can be evaluated. Improved contact, storage or wear performance
Cleaning and Protection Parts are cleaned, dried and protected against oxidation before packing. Export-ready finished contact blades
Final Packaging Parts are separated and protected against impact, scratches and moisture. Secure packaging for shipment and assembly

Quality Control System

Inspection Item Control Method Documentation
Chemical Composition Optical emission spectroscopy or an agreed material test method Chemical analysis report / MTC
Material Traceability Heat number and batch records maintained through production Material traceability records
Conductivity Conductivity measurement according to the agreed grade and test method Conductivity test data
Hardness Sample hardness testing based on the specified temper Hardness report
Cross-Section Dimensions Micrometers, profile gauges, CMM or optical measurement Dimensional inspection report
Blade Thickness Precision micrometer or CMM measurement at defined points Critical dimension records
Perpendicularity CMM, optical measurement or dedicated inspection fixture Geometry inspection data
Surface Roughness Profilometer measurement on specified contact surfaces Roughness report when required
Surface Defects Visual inspection under controlled lighting Visual inspection record
Internal Soundness Ultrasonic testing for larger or critical sections when required UT report when specified
Plating Thickness Coating thickness measurement for silver, tin or nickel plating Plating inspection report
Final Cleanliness Visual inspection and packaging-control checklist Final release record
Third-Party Inspection SGS, BV, TÜV or another approved agency can be considered Third-party report when ordered
Quality System Production and inspection controls aligned with the applicable order requirements Quality documentation available through theQuality Assuranceprocess

All dimensions, performance values and inspection frequency should be confirmed against the customer drawing, switchgear design and purchase specification. Short-circuit withstand, insertion force and cycle life depend on the complete contact assembly and should be validated by application testing.

Typical Applications

Application Typical Use Design Considerations
LV Draw-Out Switchgear MNS, GCK, GCS and MCC stationary knife contacts Jaw pressure, insertion direction, insulation clearance and temperature rise
MV Withdrawable Switchgear KYN28-type and comparable withdrawable assemblies Voltage class, creepage distance, contact force and system-level testing
High-Voltage Disconnectors Conductive blade or stationary contact components Short-time current, mechanical movement and environmental exposure
Earthing Switches Copper conductive contact interfaces Grounding current, contact pressure and corrosion protection
Sandwich Busway Plug-in branch contact assemblies Mating clearance, current rating and thermal expansion
Fast-Change Drawer Modules Blind-mating power contact assemblies Lead-in geometry, alignment tolerance and repeated insertion
Energy-Storage PCS High-current conductive contact parts Current, heat rise, vibration and enclosure clearance
New-Energy Box Transformers Internal conductive connection components Insulation system, temperature rise and assembly space
Industrial Control Cabinets Custom copper contact and conductive support parts Hole pattern, mounting method and serviceability
Power Distribution Equipment Custom copper blades, plates and connector interfaces Conductivity, plating, short-time current and inspection requirements

FAQ

What is a pure copper knife contact blade?

It is a conductive copper contact component with a blade-like mating section. The inverted T-section provides a wider mounting base, while the guided tip helps align the moving and stationary contact during insertion. Final contact geometry depends on the switchgear or electrical assembly drawing.

Which copper grades are available?

Common options include C11000 ETP, C10200 OFC, C10100 OFHC, Cu-ETP, Cu-OF, T2, TU1 and TU2. C10400/C10700 silver-bearing copper and C18150 CuCrZr may be considered when the application requires improved softening resistance or thermal performance.

Can the contact blade be made to a custom drawing?

Yes. The base width, blade height, tip shape, flange thickness, hole pattern, chamfer, radius and cut length can be reviewed from a 2D or 3D drawing. Final feasibility should be confirmed before tooling or production.

Is this product suitable for draw-out switchgear?

It can be evaluated for LV and MV withdrawable switchgear, including stationary knife-contact arrangements. The complete design must be checked for voltage, current, contact pressure, insulation clearance, heat rise and short-time withstand.

What is the purpose of the guided lead-in tip?

A tapered, beveled or rounded lead-in tip can help guide the mating contact and reduce initial alignment resistance. Actual insertion force depends on the mating jaw, surface finish, plating, spring pressure, alignment and operating conditions.

Can the copper contact be silver plated?

Yes. Hard silver plating can be considered for improved contact performance and wear resistance. Typical plating thickness may be approximately 10–30 μm, but the final value depends on the drawing, current, duty cycle and plating specification.

What tolerances can be achieved?

Typical enquiry targets may include ±0.02–0.04 mm for selected blade dimensions, perpendicularity of approximately 0.02–0.03 mm and contact-face roughness of Ra 0.2–0.4 μm. The achievable tolerance must be confirmed according to the profile, size, material and inspection method.

What documents are available with an order?

Depending on the order requirement, Cymber Metal can discuss MTC, chemical analysis, conductivity data, hardness records, dimensional inspection reports, surface-finish records, plating reports and third-party inspection. Please specify the required documents during the RFQ stage.

Request a Quote

Required Information Details to Provide
Product Drawing 2D drawing, 3D CAD file or clear dimensioned sketch
Copper Grade C11000, C10200, C10100, T2, TU1, TU2 or another specified grade
Cross-Section Base width, flange thickness, blade height, blade thickness and tip geometry
Tolerance Critical dimensions, perpendicularity, radius, flatness and surface roughness
Length Bar length, cut-block length or finished-part length
Surface Bright copper, anti-tarnish, silver, tin, nickel or anti-galling treatment
Application Switchgear, busway, disconnector, PCS, transformer or another assembly
Electrical Requirement Current, voltage, conductivity, temperature rise and duty cycle
Quantity Prototype, sample, trial order, monthly demand or batch quantity
Inspection MTC, conductivity, hardness, dimensional report, plating report or third-party inspection
Delivery Details Destination country, packing requirements and target schedule
Contact Contact Cymber Metal for an RFQ

  • Previous:
  • Next:

  • Write your message here and send it to us