Solid Rectangular Copper Conductive Block

Short Description:

Specification Details
Product Name Solid Rectangular Pure Copper Conductive Block
Product Type Full-flat block, stepped block, half-lap splice block or rabbeted copper terminal block
Material Options C11000 ETP, C10200 OFC, C10100 OFHC, Cu-ETP, Cu-OF, T2, TU1 and TU2
Optional Materials C10400/C10700 silver-bearing copper or C18150 CuCrZr, subject to technical review
Applicable Standards ASTM B187/B187M, ASTM B152/B152M, ASTM B133, EN 13601, EN 13605, JIS H3140, JIS H3250 and GB/T 5585
Manufacturing Route Continuous casting, extrusion, cold drawing, cold sawing and precision machining
Overall Profile Width Approximately 15–260 mm
Overall Thickness Approximately 6–80 mm
Shallow Step Depth Approximately 1–5 mm
Deep Half-Lap Step Depth Approximately 5–40 mm
Cut Block Length Approximately 20–1,000 mm
Bar Length Approximately 1,000–6,000 mm
High/Low Face Thickness Tolerance Typical target ±0.02–0.05 mm
Upper/Lower Face Parallelism Typical target ≤0.02 mm
90-Degree Step Verticality Typical target ≤0.02 mm
Root Radius Typical target R ≤0.15–0.30 mm
Surface Roughness Typical target Ra ≤0.4 μm on specified functional surfaces
Temper Options H02, H04 or O60, subject to material and drawing
Indicative Hardness Approximately 85–125 HV for selected hard-tempers
Conductivity Target up to or above 98% IACS for applicable grades; verify by grade and test method
Surface Finish Bright copper, anti-tarnish passivation, silver plating, tin plating or nickel plating
Silver Plating Approximately 5–30 μm when specified; ASTM B700 can be referenced
Tin Plating Available according to customer requirement; ISO 2093 can be referenced
Nickel Plating Available according to customer requirement; ISO 1456 can be referenced
Secondary Operations Drilling, tapping, milling, slotting, chamfering, deburring and marking
Inspection Documents MTC, chemical analysis, conductivity, hardness, dimensional and plating reports when specified
Final Requirement Dimensions, tolerances and performance must be confirmed by the approved drawing and technical review

Product Detail

Product Tags

Video

Short Description

Cymber Metal supplies heavy-duty solid rectangular pure copper conductive blocks for high-current electrical connections, busbar transitions, switchgear, transformers and power distribution equipment.

The product range includes full-flat rectangular blocks, shallow compensation steps, deep half-lap profiles and rabbeted copper terminal blocks. Products can be supplied as cold-drawn profiles, extruded bars, cut blocks or precision-machined finished components according to the approved drawing.

Product Overview

These solid rectangular copper conductive blocks are designed for applications that require a large conductive cross-section, stable mechanical support and controlled contact geometry. The blocks may be used as busbar transition pads, terminal blocks, outgoing connection pieces, transformer conductors or custom conductive inserts.

Available materials include C11000 ETP, C10200 OFC, C10100 OFHC, Cu-ETP, Cu-OF, T2, TU1 and TU2. C10400/C10700 silver-bearing copper and C18150 CuCrZr can be evaluated where higher-temperature softening resistance or improved wear performance is required.

For standard copper grades and conductive products, see ourPure Copperproduct range. Custom stepped and rectangular sections can be reviewed throughCustom Copper Profile Extrusion, while drilling, tapping, milling, cutting and other finishing operations can be discussed throughFine Machining.

A stepped block can help two busbars of different thicknesses sit at a more consistent level after assembly. The 90-degree step may also provide a lateral mechanical stop. Actual electrical resistance, short-circuit performance and temperature rise must be verified within the complete equipment design.

Key Features

Feature Buyer Value
Large Solid Cross-Section Provides a substantial conductive path for high-current assemblies.
High-Purity Copper Options C11000, C10200 and C10100 grades can be reviewed for conductivity-focused designs.
Full-Flat and Stepped Profiles Supports flat terminal blocks, compensation steps and half-lap busbar joints.
Near-Net Profile Forming Extrusion or cold drawing can reduce unnecessary machining compared with producing the entire shape from thick solid bar.
Single-Piece Construction A one-piece stepped block can avoid the additional interface created by stacking separate copper shims.
Controlled 90-Degree Step The step may provide a defined seating surface and lateral mechanical stop.
Custom Dimensions Width, thickness, step depth, radius, length, holes and slots can be made according to drawing.
High Conductivity Suitable copper grades can support low-resistance current transfer when correctly selected and installed.
Surface Treatment Options Silver, tin or nickel plating can be evaluated for contact, wear and environmental requirements.
Precision Functional Faces Parallelism, flatness and roughness can be inspected on critical contact surfaces.
Cut-to-Length Supply Available as cut blocks, bars or finished components according to the required assembly length.
Traceable Production Material and process records can be linked to the finished batch.

Manufacturing & Quality Control

The production route is selected according to the cross-section, step geometry, tolerance, quantity, material grade and surface-treatment requirement. Full-flat blocks may be cut from heavy copper bar or plate, while stepped versions can be produced through near-net profile forming followed by precision finishing.

Manufacturing Process

Process Stage Manufacturing Control Expected Output
Material Selection Grade, purity, temper, conductivity and certificate requirements are reviewed before production. Approved copper material with traceable heat information
Casting Upward continuous casting or another approved billet route is used according to the selected grade. Dense copper billet or feedstock with controlled chemistry
Hot Extrusion Heavy extrusion forms a rectangular or stepped intermediate section. Near-net copper profile with stable density
Cold Drawing Multi-pass drawing through controlled dies refines width, thickness, straightness and surface quality. Dimensionally controlled rectangular or stepped profile
Step Forming The high face, low face and transition step are formed or finished according to the drawing. Controlled compensation or half-lap geometry
Heat Treatment Hard-temper drawing or annealing is selected according to the required mechanical condition. Specified hardness and workability
Cold Sawing Precision saws cut bars into required block lengths. Clean, square cut blocks
CNC Machining Drilling, tapping, milling, slotting, chamfering and deburring are completed as required. Finished conductive block with assembly features
Surface Treatment Anti-tarnish, silver, tin or nickel treatment can be applied when required. Protected or contact-enhanced surface
Cleaning Parts are cleaned and dried to remove machining residue and processing contamination. Clean finished conductive components
Final Packaging Blocks are separated and protected from scratches, impact and oxidation. Export-ready packed products

Quality Control System

Inspection Item Control Method Documentation
Chemical Composition Optical emission spectroscopy or an agreed material test method Chemical analysis report / MTC
Material Traceability Heat number and batch records maintained through casting, forming and finishing Traceability record
Conductivity Digital conductivity meter or agreed conductivity test method Conductivity test data
Hardness Vickers or another agreed hardness method Hardness report
Overall Dimensions Micrometers, calipers, profile gauges, CMM or optical measurement Dimensional inspection report
Step Depth CMM, optical projector or dedicated profile fixture Step-depth inspection data
Face Parallelism CMM or precision flatness/parallelism measurement Geometry inspection record
Step Verticality Optical measurement, CMM or inspection fixture 90-degree geometry record
Root Radius Optical profile measurement or CMM Radius verification record
Surface Roughness Profilometer measurement on designated contact faces Roughness report when required
Internal Soundness Ultrasonic inspection on large or critical sections when specified UT report
Plating Thickness Coating-thickness measurement for silver, tin or nickel surfaces Plating report
Visual Inspection Surface inspection for scratches, cracks, burrs, oxidation and handling damage Visual inspection checklist
First-Article Inspection Full dimensional review before batch production when required FAI report
Batch Traceability Records retained from cast heat through extrusion, drawing, cutting and plating Batch dossier
Shipment Documents Material and dimensional documents supplied according to the purchase order EN 10204 3.1 certificate and reports when specified
Quality Management Production controls operated under the applicable ISO 9001 quality system Quality documentation available throughQuality Assurance

Near-net forming can reduce machining and material waste compared with milling a deep step from a thick solid bar, but the actual benefit depends on the profile, order quantity and tolerance requirements. Electrical resistance, current rating and short-circuit withstand must be confirmed through the complete equipment design.

Typical Applications

Application Typical Use Design Considerations
LV Switchgear Busbar transition blocks, outgoing terminals and heavy copper connection pads Current, temperature rise, hole pattern and insulation clearance
ACB and MCCB Assemblies Copper terminal blocks and half-lap transition pieces Contact pressure, mounting method and short-time current
MV Withdrawable Switchgear Custom conductive blocks for busbar and breaker connections Voltage class, creepage distance and equipment-level testing
Sandwich Busway Section-transition blocks and plug-in branch connections Mating clearance, thermal expansion and current distribution
Power Transformers High-current outgoing connection blocks and transition conductors Heat rise, connection method and mechanical support
Rectifier Equipment Heavy copper terminal and current-transfer blocks Continuous current, thermal cycling and surface finish
EV High-Power Chargers Copper transition pads and terminal connection blocks Conductivity, compact layout and cooling conditions
Energy-Storage Containers High-current connection blocks for PCS and distribution systems Vibration, enclosure clearance and temperature rise
Renewable Power Systems Copper connection blocks for inverters and distribution panels Electrical loading, insulation and corrosion protection
Industrial Control Cabinets Custom machined copper terminal and support blocks Hole position, assembly access and service requirements
High-Current Test Equipment Solid copper current-transfer and fixture blocks Contact resistance, repeatability and thermal stability

FAQ

What is a solid rectangular copper conductive block?

It is a thick, solid copper component with a rectangular cross-section designed to carry current or connect large conductors. It may be supplied as a full-flat block, stepped block, half-lap splice block or machined terminal component.

Which copper grades are available?

Common grades include C11000, C10200, C10100, Cu-ETP, Cu-OF, T2, TU1 and TU2. C10400/C10700 silver-bearing copper and C18150 CuCrZr may be evaluated when higher temperature resistance or improved wear performance is required.

Can the block include steps or rabbeted faces?

Yes. Shallow compensation steps, deep half-lap steps, 90-degree shoulders, grooves and other profile features can be reviewed according to the mating busbar and assembly drawing.

What are the typical dimensions?

Indicative profile widths are approximately 15–260 mm, with total thicknesses of approximately 6–80 mm. Cut blocks may be supplied in lengths of approximately 20–1,000 mm. Final dimensions depend on the approved drawing.

What tolerances can be achieved?

Typical enquiry targets may include ±0.02–0.05 mm for selected thickness dimensions, parallelism of approximately 0.02 mm, 90-degree step verticality of approximately 0.02 mm and surface roughness around Ra 0.4 μm. Feasibility must be confirmed by drawing review

Can the blocks be supplied in high-conductivity oxygen-free copper?

Yes. C10200 OFC and C10100 OFHC can be considered for conductivity-focused applications. Conductivity should be verified according to the selected grade, standard, temper and test method.

Can the copper block be plated?

Yes. Silver, tin or nickel plating can be evaluated according to the current, contact force, wear, corrosion and operating-temperature requirements. Plating thickness and adhesion requirements should be stated in the purchase specification.

What documents are available with an order?

Depending on the order requirement, available documents may include MTC, chemical analysis, conductivity data, hardness records, dimensional inspection reports, surface-finish records, plating reports and third-party inspection documents.

Request a Quote

Required Information Details to Provide
Product Type Full-flat block, shallow-step block, deep half-lap block or custom terminal block
Drawing 2D drawing, 3D CAD file or dimensioned sketch
Copper Grade C11000, C10200, C10100, T2, TU1, TU2 or another specified grade
Cross-Section Width, thickness, step depth, radius, groove and shoulder dimensions
Length Bar length, cut-block length or finished component length
Tolerance Thickness, step depth, flatness, parallelism, verticality and hole-position tolerances
Surface Bright copper, anti-tarnish, silver, tin, nickel or other coating
Processing Cutting, drilling, tapping, milling, deburring, chamfering or marking
Electrical Requirement Current, voltage, conductivity, temperature rise and duty cycle
Application Switchgear, busway, transformer, rectifier, EV charger or energy-storage equipment
Quantity Prototype, sample, trial order, batch quantity or annual requirement
Inspection MTC, conductivity, hardness, dimensional, plating or third-party inspection
Delivery Details Destination country, packing requirements and target schedule
Contact Contact Cymber Metal for an RFQ

  • Previous:
  • Next:

  • Write your message here and send it to us