Custom Rounded-Edge Stepped Copper Busbar

Short Description:

Item Specification
Product Custom Rounded-Edge Stepped Copper Busbar
Material Options C11000 ETP copper; C10200 or C10100 oxygen-free copper, subject to order confirmation
Applicable Standards ASTM B187/B187M, EN 13605 or an agreed customer specification, depending on product form and manufacturing route
Cross-Section Thick rounded-edge section with a thinner flat extension and one longitudinal step
Overall Width Reference range: 10–260 mm
Thick Section Reference thickness: 2–40 mm
Thin Section Reference thickness: 0.8–25 mm; selected in relation to the thick section
Edge Geometry Rounded or full-radius edge as defined by the approved drawing
Length Reference cut lengths: 15–1000 mm; longer bars of 1000–6000 mm subject to review
Supply Forms Cut pieces or straight profiles; coil supply subject to section geometry and temper
Material Condition Annealed or cold-worked condition as specified
Surface Bare copper; anti-tarnish treatment or silver, tin or nickel plating subject to specification
Secondary Processing Cutting, drilling, punching, slots, chamfers and local machining
Tolerance According to the approved drawing, manufacturing route and inspection agreement
Inspection Profile dimensions, edge radius, step height, straightness and surface condition; conductivity and hardness testing as specified
Documentation Material certificates, dimensional reports and processing records as agreed

Product Detail

Product Tags

Video

Short Description

Custom rounded-edge copper busbar featuring a thicker edge section and a thinner flat extension joined by a single longitudinal step. Material, dimensions, temper and surface finish are specified to suit the customer’s drawing. Supply options include cut pieces and longer profiles, with secondary machining and plating reviewed according to project requirements.

Product Overview

A rounded-edge copper busbar is a profiled conductor that combines a curved outer edge with a stepped, dual-thickness cross-section. Unlike a conventional flat copper bar, it provides different section thicknesses within one continuous profile.

This geometry may be considered for contact-blade blanks, conductor transitions and electrical connection components where the assembly requires a rounded edge and an offset mounting or mating surface.

Cymber Metal supports drawing-based enquiries forpure copper conductors, including material selection, profile processing and secondary finishing. Final suitability depends on the mating components, operating conditions and assembly validation.

Key Features

  • Stepped cross-section:Combines thicker and thinner sections within one conductor profile.
  • Rounded outer edge:Provides a curved edge where required by the mating design.
  • Drawing-based geometry:Width, section thicknesses, step position and radius can be reviewed together.
  • Flexible supply scope:Profiles, cut blanks or further-machined components can be discussed.
  • Surface options:Bare or plated surfaces can be specified for the intended connection environment.

Manufacturing & Quality Control

The production route is selected according to the section geometry, material condition, quantity and critical dimensions.

Stage Scope
Drawing Review Confirm section orientation, thick and thin zones, edge radius, functional surfaces and tolerances
Material Selection Confirm copper grade, temper, applicable standard and documentation requirements
Profile Production Evaluate extrusion, drawing, rolling or machining according to geometry and production quantity
Secondary Processing Cut to length, deburr and add specified holes, slots or other features
Surface Treatment Review coating type, thickness, coverage and masking requirements where plating is requested
Final Inspection Check agreed dimensions, profile geometry and surface condition; additional tests follow the inspection plan

For repeat-profile requirements,custom copper profile extrusioncan be evaluated alongside other manufacturing routes. Additional holes and functional features can be reviewed through ourcopper machining support.

Inspection methods and acceptance criteria should be agreed before production. See ourQuality Assurancepage for further information.

Typical Applications

Potential Application Design Considerations
Switchgear Contact-Blade Blanks Mating-contact geometry, edge radius, temper, coating and insertion requirements
Busway Plug-In Conductors Contact engagement, section area, clearances and temperature rise
Disconnect-Switch Conductive Parts Contact arrangement, mechanical loading and switching duty
Custom Conductor Transitions Step position, joint overlap, fastening layout and contact surfaces

These are potential application areas, not equipment approvals. Current capacity, contact performance and insulation coordination require assembly-level assessment.

FAQ

What is a rounded-edge stepped copper busbar?

It is a copper conductor with a thicker rounded-edge section and a thinner flat extension. A longitudinal step separates the two thicknesses, providing a custom cross-section rather than a uniform rectangular bar.

Is the rounded edge always a full-radius bullnose?

No. A rounded edge may use a specified radius or a full-radius profile. The drawing should define the radius, tangent transitions and allowable variation rather than relying on the product name alone.

Which copper grades can be considered?

C11000, C10200 and C10100 can be reviewed according to conductivity, processing and service requirements. Oxygen-free copper should be specified where the application requires its particular material characteristics, rather than selected solely from appearance.

Is this profile cold-drawn or CNC-machined?

The manufacturing route depends on geometry, quantity and tolerance. Extrusion followed by drawing or rolling may be evaluated for repeated profiles, while machining may suit prototypes or local features. The photographs alone do not establish the production route.

Can the dimensions and tolerances be customized?

Custom dimensions can be reviewed from a section drawing. Please identify the thick and thin sections, step position, edge radius, length and critical tolerances. Feasibility depends on how these requirements interact, not on each dimension separately.

Can the copper busbar be silver-plated or tin-plated?

Silver, tin or nickel plating can be reviewed according to the application. Specify coating thickness, plated areas, masking, adhesion requirements and whether dimensions apply before or after plating.

Does the rounded edge guarantee smooth insertion or prevent corona?

No. Insertion depends on mating geometry, alignment, contact force, surface finish and coating condition. Corona performance also depends on voltage, clearances and the surrounding electric field. Edge geometry alone cannot establish either result.

What inspection documents can be requested?

Material certificates and dimensional reports can be discussed, together with conductivity, hardness or plating reports where specified. Any EN 10204 3.1 certificate requirement should be confirmed before ordering rather than assumed for every shipment.

Request a Quote

To request a quotation from Cymber Metal, please provide your section drawing or 3D model, copper grade, temper, dimensions, critical tolerances, quantity and surface requirements. Include the application, inspection documents, destination and required delivery date so we can review a suitable supply route.


  • Previous:
  • Next:

  • Write your message here and send it to us