Custom L-Section Copper Conductive Block

Short Description:

Item Specification
Product Custom L-Section Copper Conductive Block
Material Options C11000 ETP copper, C10200 oxygen-free copper or C10100 oxygen-free electronic copper
Applicable Standards ASTM B187/B187M, ASTM B152/B152M, EN 13605, EN 13601 or agreed customer specification
Cross-Section Right-angle L-section; equal or unequal leg design
Leg Widths Reference range: 10 × 10 mm to 200 × 200 mm
Wall Thickness Reference range: 2–50 mm; equal or unequal thickness available for review
Corner Geometry Square corner, controlled radius or relief groove according to drawing
Cut Block Length Reference range: 15–1000 mm
Profile Bar Length Reference range: 1000–6000 mm, subject to section size and handling requirements
Material Condition Annealed, cold-worked or other agreed temper
Surface Bare copper, cleaned copper or anti-tarnish treated surface
Plating Options Silver, tin or nickel plating, subject to application and dimensional review
Custom Machining Drilling, tapping, slots, chamfers, grooves and root finishing
Tolerance According to the approved drawing and manufacturing feasibility review
Inspection Chemical composition, conductivity, dimensions, angle, corner geometry, straightness and surface condition
Documentation Material test certificate, dimensional report and process records as agreed

Product Detail

Product Tags

Video

 Short Description

Custom L-section copper conductive block with two intersecting legs forming a right-angle profile. Equal or unequal leg widths, different wall thicknesses, custom cut lengths and machined features can be reviewed according to the customer’s drawing.

The product can be supplied as a profile bar, cut block or further-machined copper component. Copper grade, temper, corner radius, tolerances, surface finish and plating are confirmed during technical review.

Product Overview

TheL-section copper conductive blockis designed for electrical assemblies that require a right-angle current path, mounting surface or transition between two conductor directions. The two legs can be specified with equal or unequal widths and thicknesses depending on the required connection and structural arrangement.

The corner can be designed with a square profile, controlled radius or machining relief according to the mating components. This allows the profile to be adapted to switchgear housings, busbar systems, terminal seats and other compact electrical assemblies.

Depending on the section geometry, quantity and tolerance requirements, the manufacturing route may include copper profile extrusion, drawing, sawing and CNC machining. For related materials, see Cymber Metal’spure copper products.

Key Features

  • Right-angle L-section:Provides two intersecting conductive faces for compact connection layouts.
  • Equal or unequal legs:Leg width and thickness can be adapted to the assembly design.
  • Custom corner geometry:Square corners, controlled radii or relief features can be specified.
  • High-conductivity copper options:C11000, C10200 and C10100 grades can be evaluated.
  • Flexible supply forms:Available as profile bars, cut blocks or machined components.
  • Machining support:Holes, threads, slots, chamfers and mounting features can be added.
  • Optional plating:Silver, tin or nickel finishes can be reviewed for contact or environmental requirements.

Manufacturing & Quality Control

The manufacturing route is selected according to the section shape, material grade, quantity and critical tolerances.

Stage Control Focus
Drawing Review Confirm leg widths, thicknesses, corner geometry, functional faces and connection features
Material Selection Select copper grade and specification according to conductivity and processing requirements
Profile Forming or Stock Preparation Evaluate extrusion, drawing, sawing or machining route based on geometry and quantity
Straightening and Cutting Control cut length, end condition, straightness and handling distortion
CNC Machining Produce holes, threads, slots, chamfers and root reliefs according to drawing
Surface Treatment Confirm anti-tarnish treatment or plating type, coverage and thickness
Final Inspection Verify dimensions, angle, corner geometry, surface condition and specified material properties
Documentation Provide certificates and inspection records according to the confirmed order scope

For profile development, reviewcustom copper profile extrusion. For drilling, tapping and finished functional faces, seecopper machining support.

Inspection methods and acceptance criteria should be agreed before production. Further information is available through Cymber Metal’sQuality Assurancepage.

Typical Applications

Potential Application Main Design Considerations
90-degree busbar transition blocks Leg dimensions, current path, joint arrangement and temperature rise
Switchgear conductive seats Housing clearance, mounting method, contact surface and insulation spacing
Circuit breaker internal conductors Contact geometry, assembly tolerance and operating conditions
Compact busway corner connections Corner radius, mating interface and fastening method
Transformer and rectifier terminals Connection direction, thermal management and insulation clearance
Induction heating or electroplating equipment Operating current, temperature, cooling and corrosion conditions

These are potential application areas only. Final electrical suitability must be confirmed by the customer’s system design and testing requirements.

FAQ

What is an L-section copper conductive block?

An L-section copper conductive block is a shaped copper component with two intersecting legs forming a right-angle profile. It can be used for electrical transitions, mounting interfaces or conductive connections where a flat or rectangular busbar is not suitable.

Which copper grades can be supplied?

Common options include C11000 ETP copper, C10200 oxygen-free copper and C10100 oxygen-free electronic copper. The final grade depends on conductivity, forming, machining, thermal conditions and the required material standard.

Can the two legs have different widths or thicknesses?

Yes. Equal-leg and unequal-leg designs can both be reviewed. The drawing should identify the functional leg, mounting face, current-carrying face and any required clearance or machining allowance.

Can the inner corner be sharp?

The corner can be specified as a square profile, controlled radius or relief groove. The practical corner geometry depends on the forming or machining route, material condition and the mating component. Final radius requirements should be stated on the drawing.

Can this be made as a one-piece copper profile?

A one-piece extrusion or drawing route may be evaluated for suitable geometries and production quantities. For complex, short or low-volume parts, machining from copper stock may be more practical.

Can holes, threads and plating be added?

Yes. Drilling, tapping, slots, chamfers, root reliefs and other drawing-defined features can be reviewed. Silver, tin or nickel plating may also be considered, with coating thickness and dimensional allowances confirmed before production.

How are the angle and dimensions inspected?

Inspection may include leg width, wall thickness, angle, corner geometry, straightness, cut length, surface condition, conductivity and chemical composition. The exact instruments and acceptance criteria should be agreed with the order specification.

What information is needed for a quotation?

Please provide the 2D or 3D drawing, copper grade, applicable standard, leg dimensions, thickness, cut length, quantity, corner requirements, machining, plating and inspection documents. Operating current and temperature are also useful for material and design review.

 Request a Quote

To request a quotation from Cymber Metal, please provide:

  • 2D or 3D drawing;
  • Copper grade and applicable standard;
  • Leg widths, thicknesses and overall dimensions;
  • Corner radius or sharp-corner requirement;
  • Cut length or required profile bar length;
  • Quantity or estimated annual demand;
  • Machining, plating or surface-treatment requirements;
  • Operating current, temperature and assembly conditions;
  • Required certificates and inspection reports;
  • Destination country and target delivery schedule.

These details allow the material, production route, machining plan and inspection scope to be reviewed before quotation.


  • Previous:
  • Next:

  • Write your message here and send it to us