Custom U-Channel Copper Contact Blocks

Short Description:

Item Specification
Product Asymmetric U-Channel Copper Contact Block / Conductive Seat
Material Options UNS C11000, C10200 or C10100; grade subject to application and order confirmation
Applicable Standards ASTM B187/B187M or EN 13605 where applicable to the selected grade and product form; finished components to approved drawings
Cross-Section Deep U-channel with unequal wall thicknesses
Overall Width 8–180 mm, subject to profile review
Overall Height 8–150 mm, subject to profile review
Internal Slot Width 1.5–80 mm; feasible combinations subject to tooling and geometry review
Slot Depth & Wall Thickness According to the approved drawing
Internal Corners Flat-bottom slot with corner radii specified by drawing
Supply Length Cut blocks: 10–600 mm; profile bars: 1000–6000 mm, subject to confirmation
Material Condition Annealed or cold-worked condition, according to grade and processing requirements
Custom Machining Slot finishing, cutting, drilling, tapping, chamfering and other drawing-defined features
Surface Options Clean copper surface; optional silver, tin or nickel plating
Tolerance & Roughness According to the approved drawing and manufacturability review
Inspection Profile dimensions, slot width, wall thickness, straightness and surface condition; additional testing as specified
Documentation Material certificates, dimensional reports and additional inspection records as agreed

Product Detail

Product Tags

Video

Short Description

Custom copper contact blocks featuring a deep U-shaped slot and unequal wall thicknesses. Supplied as cut blocks or profile bars, with material selection, slot finishing, drilling, tapping and optional plating according to approved drawings.

U-Channel Copper Contact Block Overview

A U-channel copper contact block is a conductive component with an open longitudinal slot for receiving a mating conductor or forming part of an electrical connection assembly. This asymmetric design combines a thinner wall with a thicker opposite wall, allowing different positioning and machining requirements within one section.

Cymber Metal supports suitablepure copper materials, profile processing and secondary machining. Final fit, contact pressure and electrical performance depend on the complete connection design, not the channel shape alone.

Key Features

Deep-slot geometry for conductor positioning; unequal walls for different structural and machining requirements; cut-block or bar supply; optional secondary machining and selective plating. Mating fit and functional surfaces are defined by the customer’s assembly requirements.

Manufacturing & Quality Control

The production route and inspection plan are selected according to section geometry, material condition and order requirements.

Stage Process / Control
Material Review Confirm grade, condition, applicable standard and electrical or joining requirements
Profile Forming Custom copper profile extrusionand, where appropriate, supported cold drawing and straightening
Secondary Machining Precision machining supportfor slot finishing, cutting, holes, threads and drawing-defined details
Dimensional Inspection Check slot width, wall thickness, corner radii and other specified geometric tolerances
Additional Verification Conductivity, hardness, surface roughness or plating checks according to the agreed inspection plan
Packing & Records Protect functional surfaces and supply the agreed material and inspection documentation

Inspection scope, acceptance criteria and sampling frequency should be confirmed before production. See ourquality assurancepage for further information.

Typical Applications

Application Potential Use
Switchgear & Circuit Breakers Conductive seats or receptacle bodies within an engineered contact assembly
Busway & Power Distribution Slotted connection bodies for mating copper conductors
Flexible Copper Shunts Termination pockets for drawing-defined brazed connections
Industrial Power Equipment Custom conductive seats and conductor-positioning components

FAQ

What is a U-channel copper contact block?

It is a copper component with an open U-shaped slot. The slot can receive a mating conductor or serve as a termination pocket. This version has unequal wall thicknesses rather than a symmetrical channel section.

Which copper grade should I choose?

C11000 is commonly considered for general conductive components. C10200 and C10100 are oxygen-free options where oxygen content or joining conditions matter. Final selection should consider conductivity, material condition, joining process and the applicable specification.

Can the profile be customized to our drawing?

Yes. Overall dimensions, slot width, slot depth, wall thicknesses and secondary features can be reviewed against your drawing. Narrow slots, thin walls and deep sections require a manufacturability assessment before dimensions and tolerances are confirmed.

Does the U-channel automatically provide spring pressure or three-sided electrical contact?

No. A rigid copper channel does not automatically provide controlled contact pressure. Reliable electrical contact requires an engineered mating fit and an appropriate clamping, spring or joining arrangement. Contact resistance and temperature rise should be validated at assembly level.

Can it be used for brazing flexible copper shunts?

The slot can be designed as a brazing pocket for a foil stack or flexible conductor. Copper grade, joint clearance, filler material, heating method and atmosphere must be reviewed together. Oxygen-free copper may be appropriate for certain reducing-atmosphere brazing processes.

What slot tolerances and surface finish can you supply?

These depend on slot depth, width, wall thickness, length, material condition and processing route. Please identify critical dimensions and functional surfaces on the drawing. Final tolerances and roughness requirements are confirmed after technical review.

Are silver, tin and nickel plating available?

These finishes can be reviewed for the intended application. Please specify the plated areas, coating thickness, applicable standard and inspection requirements. Allowance for plating buildup should be included when defining the finished slot dimensions.

What inspection documents can be requested?

Material certificates and dimensional reports can be specified with the order. Conductivity, hardness, roughness and plating reports depend on the agreed inspection scope. Any EN 10204 3.1, RoHS or REACH documentation requirement should be raised during enquiry for confirmation.

Request a Quote

Pleasecontact Cymber Metalwith your drawing, copper grade, standard, material condition, dimensions, tolerances, quantity and surface requirements. Include the mating conductor details, operating current, joining method, required documents, destination and target delivery date where available.


  • Previous:
  • Next:

  • Write your message here and send it to us