Cold-Drawn Three-Tier Stepped Copper Profile
Video
Short Description
This stepped copper profile features a raised central section, intermediate shoulders and thinner outer wings on both sides, creating three thickness levels above a flat back. It can be supplied as profile bars, cut-to-length blanks or components with drawing-based secondary machining.
Material options include C11000, C10200 and C10100. Potential applications include multi-level busbar connections, power-module heat-spreader blanks and stepped cover blanks for liquid-cooling assemblies. Grade, temper, dimensional tolerances, surface finish and coating requirements are confirmed against the customer drawing.
Product Overview: Stepped Copper Profile
A stepped copper profile combines several thickness levels within one solid cross-section. This symmetrical design has a broad central land, two intermediate shoulders and two outer wings, providing five face zones at three different heights.
The geometry can accommodate drawing-defined locating shoulders, overlapping joints or conductive connections at different levels. The flat back can serve as a mounting or thermal-interface surface when its finish and flatness are specified for that purpose.
Cymber Metal supports drawing-based enquiries within itspure copper product range. A near-net profile route can reduce the amount of contour machining compared with starting from rectangular stock, although material savings and finishing requirements depend on geometry, tooling and order quantity.
For thermal assemblies or joined covers, the profile is a component blank rather than a complete cooling system. Thermal performance, joint strength and leak tightness must be established through the final assembly design and validation.
Key Features
| Feature | Product Value |
|---|---|
| Three Thickness Levels | Provides multiple drawing-defined interface heights within one solid section |
| Bilateral Stepped Shoulders | Can support locating, overlapping or seating functions where incorporated into the assembly design |
| Raised Central Section | Provides a thicker central region for specified conductive, thermal or machining requirements |
| Flat Back | Offers a potential mounting or thermal-interface surface when flatness and finish are controlled |
| Integrated Profile | Avoids assembling separate strips solely to create the stepped cross-section |
| Near-Net Forming Option | Can reduce contour machining and material removal for suitable production quantities |
| Custom Finishing | Supports drawing-defined holes, threads, local machining and selective coatings |
Manufacturing & Quality Control
Manufacturing Process
The production route is selected after reviewing the section proportions, wing thickness, material condition and critical dimensions.Custom copper profile extrusioncan be combined with cold drawing and secondary machining where appropriate.
| Stage | Process | Main Control Points |
|---|---|---|
| Drawing Review | Assess the stepped cross-section and functional requirements | Width-to-thickness proportions, step heights, root radii, datums and finishing allowance |
| Material Selection | Select material to the agreed grade and standard | Composition, oxygen requirements where applicable, temper and traceability |
| Initial Profile Forming | Establish the stepped section through a suitable extrusion route | Central thickness, shoulder geometry, outer-wing formation and section consistency |
| Cold Drawing | Refine dimensions and material condition through controlled reductions | Step dimensions, surface condition, work hardening and section distortion |
| Straightening and Condition Control | Apply suitable straightening and, where specified, annealing | Bow, twist, back flatness and final temper |
| Cutting and Secondary Machining | Cut to length and produce drawing-defined features | Cut squareness, holes, threads, local dimensions and functional surfaces |
| Surface Treatment | Apply agreed cleaning, anti-tarnish treatment or plating | Surface preparation, coating specification, masking and dimensional allowance |
| Final Inspection and Packing | Check agreed characteristics and protect for shipment | Inspection records, identification, edge protection and surface separation |
Annealing and stress relief are not interchangeable specifications. Any thermal treatment must be selected according to the required final properties.
For components requiring tighter interface control or additional features,precision copper machiningcan be reviewed as part of the finishing route.
Quality Control System
Inspection methods, sampling frequency and acceptance criteria are agreed before production. TheQuality Assurancepage provides related information on inspection support.
| Inspection Item | Method or Record | Acceptance Basis |
|---|---|---|
| Material Identity | Certificate review and agreed chemical analysis | Ordered grade and applicable material specification |
| Oxygen Content | Suitable oxygen-analysis method, such as inert-gas fusion, when required | Grade-specific or customer-defined oxygen limit |
| Electrical Conductivity | Calibrated conductivity measurement | Agreed IACS requirement, material condition and temperature correction |
| Hardness | Vickers hardness testing where specified | Selected temper and agreed test locations |
| Step Geometry | Optical measurement, profile comparison or suitable CMM inspection | Step widths, heights, root radii and drawing datums |
| Parallelism and Symmetry | Suitable dimensional measurement and fixtures | Individually defined face relationships and center references |
| Back Flatness | Suitable surface-plate or coordinate measurement method | Agreed inspection span, support condition and full-part requirements |
| Surface Condition | Visual inspection and roughness measurement where specified | Limits for burrs, scratches, dents and functional surface finish |
| Coating Quality | Thickness measurement and additional tests where requested | Agreed coating type, coverage, adhesion and acceptance criteria |
| Internal Examination | Ultrasonic examination when requested and technically suitable | Geometry-dependent coverage and agreed acceptance criteria |
| Documentation | Batch identification and agreed inspection reports | Purchase-order traceability and reporting requirements |
Routine metallic-element analysis alone should not be treated as proof of low oxygen content. EN 10204 3.1 documentation, first-article inspection and third-party inspection should be requested before order confirmation.
Typical Applications
These are potential drawing-based applications. Final suitability depends on the complete electrical, thermal or mechanical assembly.
| Application | Typical Use | Design Considerations |
|---|---|---|
| Power Module Thermal Assemblies | Stepped heat-spreader or baseplate blanks for IGBT and SiC module systems | Thermal resistance, interface flatness, mounting pressure and thermal cycling |
| Liquid Cold Plate Assemblies | Stepped cover or locating blanks for a separately engineered cooling assembly | Joint geometry, joining procedure, distortion, coolant compatibility and leak testing |
| Switchgear Busbar Connections | Multi-level conductive transitions or stepped lap-joint components | Contact area, fastening force, temperature rise and insulation coordination |
| Energy Storage and Renewable Power Equipment | Custom conductive or thermal-interface parts in converters and power distribution assemblies | Current duty, operating temperature, vibration and service environment |
| Generator Components | Drawing-defined stepped conductive or retaining parts | Electromagnetic forces, insulation, mechanical retention and fatigue requirements |
A stepped joint does not by itself establish leak tightness. Likewise, a longer surface contour does not automatically establish an acceptable creepage distance; insulation design must consider the complete assembly.
Frequently Asked Questions
It is a solid copper section with three thickness levels: a raised center, intermediate shoulders and thinner outer wings. In this symmetrical design, those levels create five face zones above a flat back. Dimensions and corner details are defined by the customer drawing.
A flat bar normally has a uniform rectangular section. This profile incorporates thickness changes across its width, which can provide different interface heights or locating shoulders without assembling separate strips. Whether it offers a production advantage depends on quantity, tooling and finishing requirements.
It can be reviewed as a cover blank or locating component, but it is not a complete cold plate. Channel design, joining surfaces, sealing method, pressure resistance and coolant compatibility require separate engineering. The finished assembly must undergo the specified validation and leak testing.
C11000, C10200 and C10100 are options for review. Selection depends on electrical and thermal requirements, material condition, joining process and documentation. Where low oxygen is required, specify the oxygen-free grade explicitly rather than treating every pure copper grade as interchangeable.
No. They occupy three different height levels. Individual faces may be required to run parallel to the back datum, while corresponding left and right shoulders may have additional alignment requirements. These relationships need separate dimensions or geometric tolerances on the drawing.
No. Cold drawing can form the basic section and reduce subsequent material removal, but it does not guarantee a tool-mark-free surface or distortion-free part. Tight flatness, roughness or interface tolerances may still require straightening, machining or other finishing operations.
These coatings can be reviewed for the intended application. Specify the coating process, thickness, undercoat, masked areas and inspection requirements. Joining and thermal-interface surfaces may require different preparation, so coating selection should account for the complete manufacturing and assembly sequence.
Provide a dimensioned drawing, material grade, temper, quantity, critical tolerances and surface requirements. For thermal or joined assemblies, include operating temperatures, joining details and validation requirements. Documentation, destination, packaging and requested delivery timing should also be included.
Request a Quote
Send your drawing for a review of material selection, profile-forming feasibility, secondary machining and inspection requirements.
| Required Information | Details to Provide |
|---|---|
| Drawing | Dimensioned 2D drawing and available STEP model, including revision identification |
| Material | Grade, standard, temper and any oxygen-content requirement |
| Cross-Section | Overall width, center thickness, wing thickness, step widths, heights and root radii |
| Length and Quantity | Finished length, prototype quantity, production batch and estimated repeat demand |
| Critical Tolerances | Datums, face parallelism, symmetry, flatness span and functional surface roughness |
| Operating Conditions | Current, temperature, mounting load, thermal cycling and service environment |
| Joining Requirements | Brazing, welding, mechanical fastening or other assembly process |
| Surface Treatment | Coating type, thickness, undercoat, masked areas and post-treatment dimensions |
| Inspection Documents | Material certificate, conductivity results, dimensional report or first-article requirements |
| Delivery Requirements | Destination, protective packaging and requested delivery schedule |










