Cold-Drawn Central-Grooved Pure Copper Profile
Video
Short Description
This cold-drawn central-grooved pure copper profile features a wide, flat-bottom rectangular channel bordered by raised shoulders. It is designed for embedded busbar joints, locating rails, electrical assemblies and recessed power-module baseplate applications.
Available grades include C11000, C10200 and C10100, with selected silver-bearing copper options available subject to technical review. Groove width, depth, section size, cut length, temper, surface finish and plating can be customized according to the approved drawing.
Product Overview
The central-grooved pure copper profile is produced by extrusion and precision cold drawing through dedicated forming tooling. The recessed channel provides a locating feature for mating copper bars, inserts, ceramic substrates or other electrical components.
The groove can be symmetrical or offset, depending on the assembly design. Its flat bottom and raised side shoulders may help control component position and reduce lateral movement in suitable applications.
For general material information, visit Cymber Metal’sPure Copper product range.
Key Features
- Wide central flat-bottom groove for component location and assembly alignment.
- Raised side shoulders provide a defined mechanical reference surface.
- Symmetrical or offset groove layouts available.
- Cold-drawn profile forming reduces the need for extensive slot milling.
- Suitable for C11000, C10200 and C10100 pure copper grades.
- Optional silver, tin or nickel plating for specific electrical or environmental requirements.
- Custom groove width, groove depth, section width and thickness.
- Available as continuous bar, cut section or semi-finished profile blank.
- Optional drilling, tapping, punching, chamfering and CNC machining.
- Dimensional inspection can be arranged according to the approved drawing.
Manufacturing & Quality Control
| Process Stage | Description |
|---|---|
| Material Selection | C11000, C10200, C10100 or selected silver-bearing copper is chosen according to conductivity, temper, joining and application requirements. |
| Billet Preparation | Copper billets are prepared with controlled composition and internal quality according to the agreed material specification. |
| Hot Extrusion | The billet is extruded into a preliminary or near-net copper profile suitable for subsequent cold drawing. |
| Precision Cold Drawing | Dedicated forming tooling creates the central flat-bottom groove and raised side shoulders. Multiple drawing passes may be used for section control. |
| Straightening | Multi-roll straightening can be applied to improve straightness and reduce residual distortion. |
| Cutting | Precision cold sawing produces bars or cut sections according to the required length. |
| Secondary Machining | Drilling, punching, tapping, chamfering, deburring and CNC machining are available according to the approved drawing. |
| Surface Treatment | Bright copper, anti-tarnish passivation, silver plating, tin plating or nickel plating can be reviewed for suitable applications. |
For custom tooling and profile development, seecustom copper profile extrusion support.
Quality Control System
| Inspection Item | Quality Control Method |
|---|---|
| Material Traceability | Traceability from cast heat or billet to extrusion, drawing, straightening, cutting and finishing. |
| Chemical Composition | Chemical analysis according to the selected copper grade and applicable standard. |
| Conductivity | Electrical conductivity testing using an appropriate conductivity measurement method. |
| Hardness | Vickers or equivalent hardness testing for the specified temper. |
| Groove Geometry | Digital profile measurement for groove width, depth, side shoulders and wall geometry. |
| Critical Dimensions | Gauge checks or precision measurement for critical groove and section dimensions. |
| Flatness and Straightness | Inspection on a reference surface or granite plate according to the agreed inspection plan. |
| Surface Quality | Visual inspection for scratches, dents, cracks, oxidation and other visible defects. |
| Documentation | Material certificates, dimensional reports and process records available according to order requirements. |
| Third-Party Inspection | SGS or other third-party inspection can be discussed when required by the customer. |
Cymber Metal’squality assurance systemsupports material verification, dimensional inspection and documentation planning.
Typical Applications
| Application | Typical Use | Design Considerations |
|---|---|---|
| Medium- and Low-Voltage Switchgear | Embedded busbar joints and conductive connection sections | Confirm current rating, temperature rise, insulation clearance and joint design. |
| Circuit Breakers | Anti-rotation locating sections and conductive interfaces | Groove geometry and contact surfaces should follow the equipment drawing. |
| Sandwich Busway Systems | Guide rails and partition locating bars | Flatness, straightness and groove alignment are important for assembly. |
| Busbar Insulator Assemblies | Copper locating profiles for mating insulators and busbars | Confirm insulation spacing, fixing method and required plating. |
| Power Modules | Recessed copper baseplate blanks and substrate locating sections | Thermal resistance, flatness, joining method and cooling design require review. |
| EV Traction Inverters | High-conductivity copper structural and conductive sections | Grade, conductivity, thermal cycling and assembly method should be specified. |
| Energy-Storage PCS Units | Copper connection and locating profiles | Confirm current load, operating temperature and enclosure clearance. |
| Linear-Motor Systems | Conductive sliding channels and guide sections | Surface finish, straightness, wear conditions and contact design should be reviewed. |
| Custom Electrical Assemblies | Special grooved copper sections for customer-designed equipment | Provide a 2D or 3D drawing for manufacturability review. |
FAQ
It is a custom copper profile with a longitudinal flat-bottom groove formed along the center or an offset position. The groove can locate a mating bar, insert, substrate or mechanical component, while the surrounding shoulders provide additional reference surfaces.
Common options include C11000 electrolytic tough-pitch copper, C10200 oxygen-free copper and C10100 high-purity oxygen-free copper. C10400 or C10700 silver-bearing copper may also be considered when improved thermal softening resistance is required.
Yes. The groove can be centered, offset, narrow, wide, shallow or deep according to the approved drawing. Groove width, depth, corner relief and shoulder dimensions should be reviewed before tooling or production.
The primary profile can be produced by extrusion and cold drawing through forming tooling. This establishes the groove during profile forming and can reduce chip-generating slot-milling operations. Additional machining may still be used for holes, threads, steps or special features.
It can be evaluated for switchgear, breaker and busway applications where the groove provides a locating or anti-rotation function. Current rating, temperature rise, insulation clearance, joint design and applicable electrical standards must be confirmed before final selection.
The recessed profile may be suitable as a copper baseplate blank or locating component for power-module assemblies. Thermal resistance, substrate contact, flatness, joining method and cooling design should be checked against the application drawing.
Yes. Depending on the grade and application, Cymber Metal can review silver, tin or nickel plating, as well as drilling, punching, tapping, chamfering, deburring and CNC machining. Requirements should be defined on the drawing or purchase specification.
Please provide the copper grade, applicable standard, cross-section drawing, groove width and depth, overall dimensions, tolerance, temper, length, quantity, surface treatment, application, inspection documents and destination country.
Request a Quote
Cymber Metal can review this central-grooved copper profile as raw material, a cut profile blank or a further-machined component.
| Required Information | Details |
|---|---|
| Drawing | 2D or 3D drawing with groove dimensions |
| Material | Copper grade and applicable standard |
| Dimensions | Overall width, thickness, groove width and groove depth |
| Tolerance | Required dimensional tolerance, flatness and surface roughness |
| Temper | Required temper and conductivity level |
| Length | Bar length or cut-to-length requirements |
| Quantity | Sample quantity, production quantity and estimated annual demand |
| Processing | Plating, machining, drilling, punching or joining requirements |
| Documentation | MTC, dimensional report, RoHS, REACH or third-party inspection needs |
| Delivery Details | Destination country and packing requirements |









