Cold-Drawn Stepped T-Profile Pure Copper Bar
Video
Short Description
The stepped T-profile copper bar combines a longitudinal rectangular tenon with a broad base and two side shoulders. Designed for drawing-based assemblies, this section can support keyed positioning, conductor mounting, and custom thermal-management components.
Material options include C11000, C10200, C10100, Cu-ETP, Cu-OF, T2, TU1, and TU2, with the grade and temper selected according to the applicable specification. Extrusion and cold drawing can be combined with straightening, cutting, CNC machining, and optional surface treatment.
Flange widths, tenon dimensions, cut lengths, tolerances, and inspection requirements are confirmed against the customer drawing.
Stepped T-Profile Copper Bar Overview
A stepped T-profile copper bar is a solid copper section with a rectangular longitudinal rib and lateral shoulders. Depending on its installation orientation, it may function as a raised-rib conductor profile or an inverted T-section seated in a matching groove.
The tenon can assist lateral positioning when paired with a correctly dimensioned mating slot. The shoulders can provide seating surfaces or assembly stops. Equal or unequal flange widths may be specified to suit the available installation space.
Cymber Metal’spure copper productsprovide the material starting point. For repeat production,custom copper profile extrusionand subsequent drawing can be reviewed as alternatives to machining the entire section from rectangular stock.
These processes may reduce material removal, but dimensional stability, straightness, and material utilization depend on the actual section and production route.
Key Features
| Feature | Practical Value |
|---|---|
| Longitudinal rectangular tenon | Provides a defined locating feature for a matching groove or slot |
| Bilateral shoulders | Creates seating surfaces for drawing-based assemblies |
| Equal or unequal flanges | Allows the profile to accommodate symmetric or restricted mounting spaces |
| Integral copper section | Combines the rib and base in one continuous conductive component |
| Custom profile forming | Can reduce extensive stock removal where section geometry and production volume justify tooling |
| Cut-to-length supply | Supports assembly planning and reduces downstream cutting |
| Secondary machining | Allows holes, threads, slots, and local contact surfaces to be added |
| Optional surface treatment | Supports application-specific contact and environmental requirements |
Manufacturing & Quality Control
Manufacturing Process
| Stage | Process Description | Main Control |
|---|---|---|
| Drawing Review | Review tenon width, shoulder geometry, datums, mating clearance, and operating conditions. | Confirm manufacturability and critical features |
| Material Selection | Select the copper grade and condition for electrical, thermal, mechanical, and joining requirements. | Confirm grade, standard, and temper |
| Profile Forming | Use extrusion and controlled cold drawing where suitable for the section and order quantity. | Control rib position, flange dimensions, and profile consistency |
| Condition Adjustment | Apply the agreed work-hardened or annealed condition. | Verify hardness and dimensional effects |
| Straightening and Cutting | Straighten the profile and cut it into bars or finished segments. | Check straightness, length, squareness, and burrs |
| Secondary Processing | Add holes, threads, slots, chamfers, or precision faces throughcopper machining support. | Inspect features against drawing datums |
| Surface Treatment | Apply cleaning, anti-tarnish treatment, or specified coatings where required. | Confirm coating coverage and assembly compatibility |
| Protection and Packing | Separate and protect finished pieces for transport. | Reduce scratching, deformation, and moisture exposure |
Quality Control System
| Inspection Item | Method or Documentation | Acceptance Basis |
|---|---|---|
| Material Identity and Composition | Material certificate and appropriate chemical analysis | Selected grade and purchase specification |
| Oxygen Content, When Specified | Suitable oxygen-analysis method and supporting certificate | Optical emission spectroscopy alone is not proof of low oxygen content |
| Profile Geometry | Optical measurement, profile projector, micrometers, or CMM | Tenon width, flange width, thickness, and rib position |
| Parallelism and Perpendicularity | Datum-based CMM or suitable fixture inspection | Drawing tolerances and defined measurement span |
| Straightness | Surface plate, straightedge, gauges, or coordinate measurement | Agreed support arrangement and measurement length |
| Surface Finish and Edges | Profilometer where required, plus visual inspection | Designated roughness, burr limits, and permitted surface condition |
| Conductivity and Hardness | Agreed conductivity and hardness tests | Material condition and specified acceptance values |
| Assembly Fit | Sample assembly or dedicated profile gauge | Mating clearance, insertion, and seating requirements |
| Coating, When Ordered | Thickness and coverage checks | Agreed coating specification |
| Traceability and Reports | Heat/lot identification and inspection records | Documentation scope agreed before production |
Inspection frequency and any nondestructive testing should be agreed before ordering. EN 10204 3.1 certificates and third-party inspection are subject to the applicable supply arrangement.
See theQuality Assurancepage for inspection and documentation enquiries.
Typical Applications
| Application | Typical Use | Design Considerations |
|---|---|---|
| Switchgear and Breakers | Located conductor bars or stationary contact supports | Current, temperature rise, clearances, fastening, and short-circuit forces |
| Contactors and Conductor Tracks | Keyed copper rails or contact-support profiles | Contact pressure, wear, surface finish, and coating selection |
| Busway Assemblies | Profiled conductors seated in matching supports | Insulation, thermal expansion, support spacing, and fit |
| Liquid Cold Plates | Stepped cover strips or locating inserts in purpose-designed assemblies | Copper grade, joining procedure, distortion, corrosion compatibility, and leak testing |
| Inverters and Energy Storage Equipment | Custom conductive or thermal-interface components | Electrical isolation, temperature, joint resistance, and assembly tolerances |
| Motors and Generators | Drawing-specific slot components considered by the equipment designer | Mechanical strength, fatigue, speed, temperature, and electromagnetic requirements |
For joining-sensitive projects,C10200 coppermay be considered, but material selection alone does not qualify a welding or brazing procedure. Weld zones should have a specified surface condition rather than an assumed plating requirement.
Cold-plate sealing and rotating-machine applications require separate engineering validation. This profile does not carry a universal current, pressure, or rotational-speed rating.
FAQ
Yes. Equal or unequal flange widths can be reviewed from the drawing. Unequal widths may help accommodate restricted space or distinguish assembly orientation when the mating geometry also provides that function.
The basic geometry is related. This version emphasizes controlled shoulder dimensions and a rectangular locating tenon. Installation orientation determines whether the rib faces upward or enters a mating slot.
It is a copper section with a longitudinal rectangular tenon and two side shoulders. The tenon can locate within a matching groove, while the shoulders provide defined seating surfaces.
Selection depends on conductivity, temper, joining conditions, temperature, and mechanical loading. C11000 and oxygen-free grades such as C10200 are options, but they are not interchangeable for every manufacturing process.
It can be reviewed for a purpose-designed cover or insert. The assembly still requires a qualified joining procedure, dimensional control, corrosion review, and appropriate pressure or leak testing.
Yes. Machining and coating requirements can be included in the RFQ. Specify feature positions, tolerances, coating type, thickness, and any areas that must remain uncoated.
No. They are enquiry targets. Achievable values depend on section size, length, temper, tooling, finishing, and inspection method, and must be confirmed before production.
Provide the drawing, grade, standard, temper, dimensions, tolerances, quantity, surface treatment, application, inspection requirements, destination, and target schedule. A mating drawing is useful for keyed assemblies.
Request a Quote
| Required Information | Details to Provide |
|---|---|
| Material and Standard | Grade, governing specification, temper, conductivity, and hardness requirements |
| Drawing | Dimensioned 2D drawing, 3D model, or sample; include mating geometry where available |
| Section Dimensions | Overall width and height, tenon width, flange widths, thicknesses, and root radii |
| Tolerances | Critical dimensions, datums, parallelism, straightness, and measurement span |
| Supply Form and Quantity | Cut segments, straight bars, or coil enquiry; prototype and batch quantities |
| Processing and Surface | Holes, threads, slots, finish, coating, coverage, and uncoated zones |
| Application and Documents | Operating conditions, inspection plan, material certificate, and any compliance documents |
| Delivery Requirements | Destination, Incoterm, packaging, and requested schedule |
Contact Cymber Metal for a drawing-based quotation. The section, production route, inspection plan, and commercial terms will be reviewed against your requirements.









