H-Section Copper Profiles with Dual Lipped Channels
Video
Short Description
Cymber Metal supplies custom H-section copper profiles with two opposed lipped channels for drawing-defined electrical components. Available as long bars or cut blocks, with material, machining and plating options confirmed against the application and approved drawing.
Product Overview
An H-section copper profile combines a central web with two opposed channels. Inward-facing lips narrow each channel opening, creating undercut spaces for compatible inserts or contact-support components.
These profiles can be specified in selectedpure copper grades, including C11000, C10200 and C10100. Channel dimensions, lip geometry and surface treatment are tailored to the mating assembly rather than treated as a universal fitting system.
Key Features
- Dual lipped channels for compatible, drawing-defined inserts.
- One continuous copper section connecting both channel faces.
- Long-bar or cut-block supply for different assembly requirements.
- Custom channel geometry, finishing and plating options.
Manufacturing & Quality Control
| Stage | Control Focus |
|---|---|
| Material Selection | Confirm copper grade, condition, applicable standard and documentation requirements |
| Profile Production | Reviewcustom copper profile extrusionand drawing feasibility against the channel geometry |
| Secondary Processing | Useprecision machiningwhere required for cut lengths, holes or local features |
| Cross-Section Inspection | Check channel openings, internal spans, lip thickness, web dimensions and specified corner radii |
| Surface Treatment | Confirm coating type, thickness and its effect on mating clearances |
| Final Inspection | Inspect agreed critical dimensions, surface condition and order-specific properties before packaging |
Inspection methods, sampling and acceptance criteria are agreed before production. See ourquality assurancepage for the broader inspection framework.
Typical Applications
| Application | Potential Component Role |
|---|---|
| Switchgear and Circuit Breakers | Drawing-defined contact-support blocks and conductive connection components |
| Busway Assemblies | Slotted connector profiles and insert-support components |
| Industrial Conductor Rails | Conductive rail sections and connection blocks |
| Rectifier and Traction Equipment | Custom conductor components with dual-sided mounting interfaces |
Final suitability depends on electrical, thermal and mechanical validation of the complete assembly.
FAQ
It is a copper section with a central web and two opposed channels. Inward-facing lips create openings narrower than the internal channel spaces, providing an undercut geometry for compatible mating components.
Only when the mating dimensions are compatible. Channel opening, internal span, corner radii, coating thickness and assembly clearance must be checked against the insert drawing.
The lips can provide transverse capture of a compatible insert. They do not automatically prevent longitudinal movement; end stops or additional retention features may be required. Electrical contact pressure also requires separate validation.
No. Both channels belong to the same continuous copper body and are electrically connected. Separate circuits require an appropriately insulated assembly design.
C11000 is an ETP copper option, while C10200 and C10100 are oxygen-free grades. Selection depends on the applicable standard, conductivity requirements, processing conditions and operating environment.
Tolerances are confirmed after reviewing the cross-section, length, material condition and production route. Critical channel dimensions should specify whether acceptance applies before or after plating.
These finishes can be reviewed against the order specification. Coating thickness and coverage must account for channel access, mating clearance and the intended contact conditions.
There is no universal rating for the profile alone. Current capacity depends on conductor area, joints, cooling and allowable temperature rise. Voltage suitability depends on insulation, clearances and the complete equipment design.
Request a Quote
Contact Cymber Metalwith your cross-section and mating-part drawings, copper grade, condition, length, quantity and plating requirements. Please identify critical channel dimensions, inspection documents, operating conditions, destination and required delivery date so we can review the suitable production route.









