Arc-Backed Multi-Groove Copper Profiles
Video
Short Description
Custom arc-backed copper profiles combining a convex rear surface, a central rectangular slot and two flanking curved grooves. Supplied as profile bars or cut sections, with drawing-defined dimensions, material condition, machining and optional plating.
Arc-Backed Copper Profile Overview
An arc-backed copper profile combines a curved rear surface with multiple longitudinal grooves on the opposite face. The central slot and side grooves provide distinct locating surfaces for customer-designed contact components, guides or supporting parts.
Cymber Metal supplies these sections in selectedpure copper gradesfor switchgear and tubular busbar component manufacturing. The back radius, groove geometry and mating clearances are defined by the assembly drawing; the curved shape alone does not guarantee full contact or secure retention.
Key Features
- Arc-backed geometry:Custom rear radius for a defined curved mating surface.
- Three-groove arrangement:Central slot and two side grooves accommodate different locating requirements.
- Drawing-based configuration:Adjustable groove positions, section dimensions and cut lengths.
- Flexible supply:Profile stock, cut blanks or further-machined components with optional plating.
Manufacturing & Quality Control
| Stage | Scope |
|---|---|
| Material Selection | Confirm copper grade, material condition and required electrical or mechanical properties |
| Profile Production | Reviewcustom copper profile extrusionand drawing routes for the specified section |
| Cutting & Machining | Cut to length and deburr; applyprecision machiningwhere required for critical features |
| Surface Treatment | Specify plating type, thickness, coverage and masking requirements |
| Dimensional Inspection | Check back-arc geometry, central slot, side grooves, length, straightness and twist according to the inspection plan |
| Material & Surface Checks | Conductivity, hardness, material verification and surface inspection as agreed |
| Documentation | Material and inspection records according to the order specification |
Ourquality assurance approachsupports order-specific inspection planning. Critical mating surfaces and datum requirements should be identified before production.
Typical Applications
| Application | Intended Use |
|---|---|
| Switchgear Contact Assemblies | Drawing-defined contact rail blanks and locating sections for VCB, GIS or disconnector components |
| Tubular Busbar Assemblies | Copper sections with a rear radius matched to the specified tubular mating surface |
| Custom Electrical Equipment | Conductive supports and guide profiles requiring combined flat-slot and curved-groove geometry |
FAQ
It describes the cross-section: one central rectangular slot and two curved side grooves. These are geometric features in a single copper section, not three electrically isolated conductors.
C11000 electrolytic tough-pitch copper and oxygen-free grades such as C10200 or C10100 can be reviewed. Selection depends on the required material standard, conductivity, processing route and service conditions.
The back radius can be specified for a particular mating surface. Provide the tube dimensions, fit requirements and tolerances; a curved back does not automatically establish zero-gap contact.
They can provide locating surfaces, but secure retention and contact pressure depend on the complete assembly. Mating parts, fasteners, spring preload and operating movement must be evaluated together.
Tolerance feasibility depends on section size, material condition and production route. Mark critical slot dimensions, groove positions, back-arc geometry and datum references on the drawing for review.
These finishes can be reviewed according to the application. Specify coating thickness, coverage, masking, adhesion and inspection requirements, particularly on functional contact surfaces.
There is no universal current rating for the profile shape. Allowable current depends on copper cross-section, contact resistance, cooling, temperature-rise limits and the complete equipment design.
Material certificates and dimensional reports can be specified, with conductivity, hardness or coating inspection results where required. Document type, inspection scope and acceptance criteria should be agreed before production.
Request a Quote
Contact Cymber Metalwith your section drawing, mating-surface dimensions, copper grade, material condition, critical tolerances, cut length, quantity, machining and plating requirements. Include the application, required tests and documents, delivery destination and target schedule for technical review.









