Double-Beveled Copper Profile with Flat Top
Video
Short Description
Custom double-beveled copper profile featuring a flat top, two inclined shoulders and parallel side walls. Supplied as profile bars, cut-to-length blanks or further-machined components, with copper grade, bevel geometry, material condition and surface treatment specified to the approved drawing.
Product Overview
This double-beveled copper profile combines a rectangular lower section with two chamfered upper shoulders and a central flat top. The geometry can be evaluated for electrical contact blanks, guided conductor assemblies and custom busbar connections.
Part of ourpure copper productsrange, the profile can be specified in C11000, C10200 or C10100 copper, subject to confirmation. Bevel angle, top width and mating clearances are reviewed against the intended assembly. The profile shape alone does not establish current rating, contact performance or mechanical retention capability.
Key Features
- Defined top geometry:Two inclined shoulders connect the flat top to the side walls.
- Custom bevel design:Shoulder angles, top width and corner details can be specified by drawing.
- Flexible supply forms:Longer bars, cut blanks and further-machined components can be reviewed.
- Material selection:Copper grade and condition are selected around electrical, joining and mechanical requirements.
- Optional surface treatment:Plating and anti-tarnish requirements can be included in the order specification.
Manufacturing & Quality Control
| Stage | Scope |
|---|---|
| Drawing Review | Confirm section dimensions, bevel angles, symmetry, mating clearances and critical features |
| Material Selection | Confirm copper grade, condition and material documentation |
| Profile Production | Reviewcustom copper profile extrusion, cold drawing or machining according to geometry and order requirements |
| Cutting & Machining | Cut-to-length preparation, drilling, threading and functional-face finishing through agreedcopper machining support |
| Surface Treatment | Confirm coating type, coverage, thickness, masking and finished dimensions where applicable |
| Final Inspection | Check agreed dimensions, bevel geometry and surface requirements; perform additional tests where specified |
| Packaging | Protect profile surfaces and edges according to the shipping and handling requirements |
Inspection methods, sampling plans and acceptance criteria are agreed before production. See ourQuality Assurancepage for further information.
Typical Applications
| Application | Potential Use |
|---|---|
| Plug-in Contact Assemblies | Copper blanks with beveled shoulders for customer-designed contact systems |
| Switchgear Conductors | Custom conductor profiles with defined lead-in or locating geometry |
| Busway Connections | Profile blanks for guided insertion or transition components |
| Custom Busbar Terminals | Machined connection blocks with application-specific mounting features |
| Industrial Electrical Equipment | Conductive blanks requiring a flat top and chamfered shoulders |
Application suitability depends on the complete assembly, operating conditions and applicable equipment requirements.
FAQ
It is a copper section with two inclined upper shoulders, a central flat top and a wider lower body. It can be supplied as bar stock or cut blanks for further processing into customer-designed electrical or mechanical components.
C11000 ETP, C10200 oxygen-free and C10100 oxygen-free electronic copper may be considered. Selection depends on conductivity, joining methods, material condition and operating requirements. The grade and applicable standard should be stated in the enquiry.
The production route depends on section geometry, quantity, material condition and tolerances. Extrusion followed by drawing may be considered for suitable sections, while machining may be required for specific features or smaller production quantities.
Yes, these features can be reviewed against your drawing. Specify both shoulder angles, top width, overall dimensions and corner radii. Identify any critical symmetry or mating-clearance requirements so feasibility can be checked before quotation.
They may serve as lead-in surfaces when incorporated into a suitable contact design. Actual alignment, insertion force, contact pressure and coating wear depend on the mating components, tolerances and operating conditions. These effects require assembly-level validation.
Not automatically. Rotor applications require assessment of speed, centrifugal loading, fatigue, temperature, material condition and retention geometry. A copper profile supplied to dimensions is not an approved rotor component without equipment-specific engineering review.
Conductivity depends on copper grade, condition and test requirements. Dimensional capability depends on section size and production route. Required conductivity, bevel-angle tolerance, symmetry and surface finish should be specified and confirmed rather than assumed from a general product description.
Silver, tin or nickel plating can be reviewed according to the application. Specify coating thickness, coverage and masking requirements. Material certificates, dimensional reports and coating inspection records can be included in the agreed order scope.
Request a Quote
Please provide your cross-section drawing or CAD file, copper grade, material condition, required lengths and quantity. Include critical tolerances, machining details, surface treatment and inspection requirements.
For contact applications, provide mating-part details and operating conditions where available. Please also specify the delivery destination and required timeline.
Contact Cymber Metal for a quotationand a drawing-based feasibility review.










