Custom Multi-Stepped Copper Conductive Blocks with Deep Slots

Short Description:

Item Specification
Product Multi-Stepped Deep-Slotted Copper Conductive Block
Material Options C11000, C10200 or C10100 copper; other grades subject to technical review
Applicable Standards ASTM B187/B187M, ASTM B152/B152M or EN 13605, where applicable to the selected grade and form
Overall Width 10–220 mm; subject to drawing review
Overall Height 4–150 mm; dependent on the complete geometry
Geometry Multi-level steps, recessed channels, deep slots, shoulders or bottom locating features
Deep-Slot Width Approximately 1–3 mm where applicable to the approved drawing
Supply Forms Cut blocks: 10–600 mm; bars: 1000–6000 mm, subject to feasibility
Material Condition Annealed, cold-worked or other agreed condition
Surface Options Bare copper, mill finish, silver-plated, tin-plated or nickel-plated
Custom Processing CNC milling, wire EDM, drilling, tapping, chamfering and contact-face finishing
Tolerance According to the approved drawing and manufacturability review
Inspection Material identity, step dimensions, slot width, perpendicularity, length and surface condition
Documentation Material certificates, dimensional reports and processing records available as agreed

Product Detail

Product Tags

Video

Short Description

Cymber Metal supplies custom multi-stepped copper conductive blocks with deep slots, locating shoulders and drawing-defined grooves. These components can be produced as cut blocks or machined parts for switchgear, circuit breakers, contactors and other high-current assemblies.

Product Overview

This copper conductive block combines multiple height levels with deep slots, recessed channels and locating surfaces. The geometry can be designed to position a busbar, contact element, arc-runner component or other mating part inside a compact electrical assembly.

The outer profile may be produced by extrusion, drawing or machining, while deep slots and local details can be finished by CNC machining or wire EDM. The final geometry, contact fit, retention method and electrical performance must be confirmed against the approved assembly drawing.

Material options can be reviewed through Cymber Metal’sPure Copperproduct range.

Key Features

  • Multi-level steps for drawing-defined positioning and assembly alignment.
  • Deep slots and recessed grooves for compatible mating parts.
  • Compact conductive geometry for custom switchgear and contactor components.
  • Available as near-net blanks, cut blocks or finished machined parts.
  • Optional silver, tin or nickel plating on selected functional surfaces.
  • CNC machining and wire EDM available for complex slot details.

Manufacturing & Quality Control

Stage Control Focus
Material Selection Confirm copper grade, standard, condition and documentation requirements
Near-Net Forming Reviewcustom copper profile extrusionfor the outer stepped geometry where suitable
Cutting and Sizing Produce agreed block or bar lengths with specified end condition
Deep-Slot Machining Use CNC milling or wire EDM for narrow slots, recessed channels and local features
Secondary Machining Usefine machiningfor holes, threads, chamfers and contact faces
Surface Treatment Confirm plating type, coverage and dimensional allowance for mating areas
Final Inspection Check critical step heights, slot dimensions, perpendicularity, length and surface condition

Inspection methods, sampling frequency and acceptance criteria should be agreed before production. The general inspection framework is described on thequality assurancepage.

Typical Applications

Application Potential Component Role
Air Circuit Breakers Stationary contact bases and conductive support blocks
Molded-Case Circuit Breakers Stepped contact seats and terminal components
Vacuum Circuit Breakers Drawing-defined conductive blocks and contact-support parts
DC Contactors Multi-level terminal and conductor-support components
Solid-State Relays Compact copper conductive interfaces
High-Current Rectifier Cabinets Stepped transition blocks and connection components
Welding Transformers Custom conductive transition or terminal blocks

Final suitability depends on the mating parts, contact pressure, insulation system, short-circuit conditions, cooling and complete equipment design.

FAQ

What is a multi-stepped copper conductive block?

It is a custom copper component with several height levels, grooves, slots or locating shoulders. The profile is designed to position or connect conductive parts in a compact electrical assembly.

What are the deep slots used for?

Deep slots may accommodate contact elements, busbar edges, inserts, fasteners or other drawing-defined mating components. Their width, depth and wall geometry must be matched to the final assembly.

Can this part be used as a circuit-breaker contact base?

It can be reviewed for circuit-breaker contact bases when the drawing, material grade, contact arrangement and operating conditions are provided. Final electrical and mechanical validation remains the responsibility of the equipment design.

Is the component made from one continuous copper piece?

It can be supplied as a one-piece machined or formed copper component. Whether additional contacts, inserts or plated surfaces are added depends on the assembly design and order specification.

Which copper grades are available?

C11000, C10200 and C10100 are typical options. The final grade depends on conductivity, forming requirements, joining method, temperature and the applicable material standard.

Can narrow slots be produced in copper?

Yes. Narrow or deep slots can be reviewed for CNC milling, form machining or wire EDM. Feasibility depends on slot width, depth, corner radius, length and required quantity.

Can the contact surfaces be silver-plated?

Silver plating can be reviewed for selected contact or mating surfaces. Coating thickness, coverage and dimensional allowance should be defined because plating changes the final fit.

What current rating does the copper block have?

There is no universal current rating for the block alone. The rating depends on cross-sectional area, contact resistance, cooling, connection method, duty cycle and allowable temperature rise in the complete assembly.

Request a Quote

Please send the 2D or 3D drawing, copper grade, applicable standard, overall dimensions, step and slot details, quantity, surface treatment and inspection requirements. You cancontact Cymber Metalfor a drawing review and production feasibility check.


  • Previous:
  • Next:

  • Write your message here and send it to us