Custom Offset Copper Connector Block for Electrical Contacts

Short Description:

Item Specification
Product Custom Offset Copper Connector Block / Electrical Contact Bridge
Geometry S-shaped, Z-shaped or other flat offset outline with locating notches, radii and drawing-defined contact areas
Typical Grades C11000, C10200 or C10100 pure copper; C10400/C10700 silver-bearing copper and C18150 CuCrZr available after material review
Applicable Standards ASTM B152/B152M, ASTM B187/B187M, EN 13601 or another agreed material specification, depending on raw-material form and production route
Overall Envelope Approximately 10–200 mm; larger or special parts subject to technical review
Part Thickness 2–100 mm; subject to geometry, raw-material form and selected process
Profile Options S-shaped, Z-shaped, L-shaped, U-shaped or custom drawing-based geometry
Material Condition Annealed, cold-worked or another agreed condition
Production Route Fine blanking, wire EDM, laser cutting, CNC milling, or cut segments from a custom profile
Edge Condition As-cut, deburred, chamfered, radiused or finish-machined as specified
Surface Machined or cut finish; optional polishing, anti-tarnish protection, silver plating, tin plating or nickel plating
Custom Features Holes, slots, locating notches, steps, flats, threads, contact areas and identification marks
Tolerance Outer profile, notch position, thickness, flatness and edge requirements according to the approved drawing
Inspection Chemical analysis, conductivity, hardness, profile dimensions, flatness, edge condition, surface quality and coating thickness as specified
Documentation Material test certificate, dimensional report and applicable process or coating records available as specified
Compliance RoHS and REACH documentation available subject to material and order confirmation

Product Detail

Product Tags

Video

Short Description

This custom copper connector block is a one-piece conductive link with offset terminal areas, a narrowed connecting section and radiused locating notches. S-shaped, Z-shaped and other drawing-specific outlines can be produced for electrical contacts, circuit-breaker bridges, terminal transitions and compact power assemblies.

Typicalpure copperoptions include C11000, C10200 and C10100. Silver-bearing copper or C18150 CuCrZr can be reviewed as separate material choices. Depending on geometry, thickness, quantity and tolerance, production may use fine blanking, wire EDM, laser cutting, CNC milling, or cut segments from a custom profile. Relatedcustom bent and punched pure copper partsare also available for project review.

Key Features

  • One-piece offset current path without an assembled joint inside the connector body.
  • S-shaped, Z-shaped and custom outlines available from customer drawings.
  • Radiused transitions and locating notches can be matched to surrounding components.
  • Suitable for prototypes, low-volume machining and repeat production after process review.
  • Optional holes, slots, steps, plating and finished contact surfaces.
  • Dimensional and electrical acceptance criteria agreed before production.

Manufacturing & Quality Control

Stage Control Point
Drawing Review Confirm outline, terminal areas, notches, radii, thickness, critical tolerances, joining method, application and quantity
Material Selection Select the copper grade, condition and specification according to conductivity, strength, temperature and joining requirements
Process Selection Choose fine blanking, wire EDM, laser cutting, CNC milling, or a custom-profile route according to thickness, geometry and volume
Profile Cutting Produce the external shape and internal notches while controlling the specified location and edge requirements
Secondary Processing Add holes, slots, threads, steps or contact areas withcopper machining support
Edge & Surface Finishing Deburr, chamfer, radius, polish or clean the part according to the approved specification
Surface Treatment Apply optional anti-tarnish protection or silver, tin and nickel plating
Inspection Verify profile dimensions, notch position, thickness, flatness, surface condition and selected material or coating properties
Documentation & Packing Prepare specified records and separate finished parts to reduce contact damage during transport

For inspection methods and available documentation, see ourQuality Assurancepage. Product-specific testing and acceptance criteria are confirmed before order placement.

Typical Applications

  • Stationary contact supports and contact bridges in MCCB, ACB and MCB assemblies.
  • Conductive links for industrial contactors, relays and terminal systems.
  • Offset busbar transition links in EV battery packs and energy storage assemblies.
  • Compact conductive connections in switchgear, inverters and power-distribution equipment.
  • Custom locating or current-carrying blocks for drawing-specific electrical assemblies.

Final suitability depends on current, allowable temperature rise, contact area, joint pressure, short-circuit load, support method, coating and equipment standards. The complete assembly should be reviewed before the connector is approved for use.

Frequently Asked Questions

What is a custom copper connector block?

It is a drawing-specific conductive component used to connect terminals or contact areas that cannot be served by a standard straight busbar. The outline may include offsets, curved transitions, locating notches, holes or stepped contact regions.

Is this part S-shaped or Z-shaped?

The photographed sample has a flat offset outline that may be described as S-shaped or Z-shaped depending on its installed orientation. For manufacturing and inspection, the approved drawing should define the exact contour, datum system, radii and locating features.

Which copper grades are available?

C11000, C10200 and C10100 are typical pure copper choices. C10400 or C10700 silver-bearing copper may be reviewed where softening resistance is important. C18150 CuCrZr can be considered where higher strength or temperature resistance is required.

How can the connector block be manufactured?

Fine blanking or laser cutting may suit thinner repeat-production parts. Wire EDM or CNC milling may suit prototypes, thicker sections or precision profiles. A custom-profile route can be considered for suitable repeat quantities.

Can holes, slots or locating notches be added?

Yes. Bolt holes, slots, threads, steps, flats, contact areas, identification marks and locating notches can be added according to the approved drawing. Critical positions and datum references should be clearly identified.

Are silver, tin or nickel coatings available?

Yes. Full or selective plating can be reviewed. Please specify the coating material, required thickness, plated area, masking zones, adhesion requirement and applicable inspection standard.

What tolerances and documents can be supplied?

Tolerance depends on part size, thickness, material condition and production route. Available checks may include composition, conductivity, hardness, profile dimensions, flatness, surface condition and coating thickness.

What information is required for a quotation?

Please provide the drawing, copper grade and standard, thickness, critical dimensions and tolerances, quantity, joining method, machining or plating requirements, application, operating conditions, inspection documents and destination.

Request a Quote

Please send:

  • 2D drawing with the full contour, radii, notches and datum references.
  • 3D model if steps, pockets, holes or complex features are required.
  • Copper grade, applicable standard and material condition.
  • Part thickness, overall dimensions and critical tolerances.
  • Order quantity, annual demand and prototype requirements.
  • Machining, deburring, surface finish and plating requirements.
  • Application, operating current, temperature and joint design.
  • Inspection documents, packing, destination and requested delivery schedule.

Contact Cymber Metalfor material selection, manufacturability review and quotation.


  • Previous:
  • Next:

  • Write your message here and send it to us