Custom I-Section Copper Busbar Profiles

Short Description:

Item Specification
Product Custom I-Section / Double-Flanged Copper Busbar Profile
Material Options C11000, C10200 or C10100 copper; other copper alloys available after technical review
Applicable Standards ASTM B187/B187M or EN 13605, where applicable to the selected grade and product form
Profile Geometry Symmetrical I-section, wide-flange H-section or drawing-defined asymmetric profile
Section Height 6–160 mm; subject to cross-section review
Flange Width 4–120 mm; subject to cross-section review
Web / Flange Thickness 1.5–35 mm; dependent on the complete design
Supply Forms Cut segments: 30–1500 mm; bars: 1000–6000 mm, subject to feasibility
Material Condition Annealed, cold-worked or other agreed condition
Surface Bright copper, mill finish, machined, silver-plated, tin-plated or nickel-plated
Custom Processing Cutting, deburring, drilling, tapping, chamfering and drawing-defined machining
Tolerance According to the approved drawing and manufacturability review
Straightness / Twist Controlled according to the agreed profile and length requirements
Inspection Material identity, dimensions, profile geometry, surface condition and specified electrical or mechanical properties
Documentation Material certificates, dimensional reports and processing records available as agreed

Product Detail

Product Tags

Video

Short Description

Cymber Metal supplies custom I-section, H-section and double-flanged copper busbar profiles for drawing-defined electrical components. Profiles can be supplied as long bars or cut segments, with forming, machining and plating options reviewed according to the final application.

Product Overview

This profiled copper busbar uses a central web and extended upper and lower flanges to create a rigid, electrically continuous section. Depending on the approved drawing, the cross-section may be specified as an I-section, wide-flange H-section or another asymmetrical profile.

The flanged geometry can help integrate the conductor into motor rotor slots, busway supports, switchgear assemblies or conductor-rail systems. Final fit, current capacity, thermal behavior and mechanical performance must be confirmed against the complete assembly design.

Material options can be reviewed through Cymber Metal’sPure Copperproduct range.

Key Features

  • I-section or double-flanged geometry for drawing-defined electrical assemblies.
  • Continuous copper section without an assembled joint through the conductor body.
  • Suitable for long bars, cut segments and custom conductor components.
  • Optional extrusion, drawing, machining, cutting and plating routes.
  • Profile dimensions developed around the mating slot, support or rotor-core design.
  • Copper grade and material condition selected according to conductivity, strength and forming requirements.

Manufacturing & Quality Control

Stage Control Focus
Material Selection Confirm copper grade, standard, condition and required material documents
Profile Forming Reviewcustom copper profile extrusionor another suitable forming route
Drawing / Sizing Control flange width, section height, web thickness and overall profile symmetry
Straightening Review straightness, twist and flange parallelism according to the approved drawing
Cutting Produce specified bar or segment lengths with deburring and end-condition requirements
Secondary Machining Usefine machiningfor holes, threads, slots or local features
Surface Treatment Confirm silver, tin or nickel plating requirements, including coverage and coating allowance
Final Inspection Check critical dimensions, surface condition and specified conductivity or mechanical properties

Inspection methods, sampling frequency and acceptance criteria should be agreed before production. The general inspection framework can be reviewed on thequality assurancepage.

Typical Applications

Application Potential Component Role
Motor Rotor Assemblies Rotor bars or damper-bar components subject to drawing and assembly validation
Wind Generator Equipment Custom conductive profiles for generator-related assemblies
Rail Traction Motors Profiled copper conductors and rotor-related components
Switchgear Rigid main conductors and custom busbar sections
Sandwich Busways High-current conductor profiles and connection sections
Industrial Conductor Rails Rigid rail sections and joining components
Rectifier Equipment Custom conductive bars for high-current electrical systems

The final current, temperature and mechanical ratings depend on the complete assembly, contact design, cooling conditions and installation method.

FAQ

What is an I-section copper busbar profile?

It is a profiled copper conductor with a central web and extended flanges. The section is designed according to the customer drawing to provide a specific combination of conductivity, stiffness, fit and mounting geometry.

Is this product an I-beam or an H-section copper bar?

The final description depends on the cross-section drawing. Similar products may be called I-section, H-section, double-flanged copper bar or profiled copper busbar. The approved technical drawing should determine the final product name.

Can the profile be used as a motor rotor bar?

It can be reviewed for rotor-bar or damper-bar applications when the cross-section, grade, condition, length, brazing requirements and operating temperature are provided. Rotor assembly compatibility must be validated by the equipment designer.

Which copper grades are available?

C11000, C10200 and C10100 are typical options. Other copper alloys may be considered where higher-temperature strength or special conductivity requirements apply. Final selection should follow the required standard and application conditions.

Can the copper profile be supplied in custom lengths?

Yes. Long bars and cut segments can be reviewed according to the required profile size, saw-cut condition, end preparation, quantity and packing method.

Can holes, slots or threads be added?

Drawing-defined drilling, tapping, slots, chamfers and other local features can be reviewed after the basic profile is formed. The most practical route depends on the feature location, tolerance and production quantity.

Is silver plating available?

Silver plating can be reviewed for applications requiring a specified contact or brazing surface. Coating thickness, coverage and dimensional allowance must be confirmed because plating can affect mating clearances.

What current rating does the copper busbar have?

There is no universal current rating for the profile alone. The rating depends on cross-sectional area, length, installation, cooling, joints, allowable temperature rise and the complete electrical design.

Request a Quote

Please send the cross-section drawing, copper grade, applicable standard, temper, section height, flange width, web and flange thickness, length, quantity, surface treatment and inspection requirements. You cancontact Cymber Metalfor a drawing review and production feasibility check.


  • Previous:
  • Next:

  • Write your message here and send it to us