Custom Rounded-Top T-Section Copper Busbar

Short Description:

Item Specification
Product Custom Rounded-Top T-Section Copper Busbar
Material Options UNS C11000 ETP copper, C10200 oxygen-free copper or C10100 oxygen-free electronic copper, subject to confirmation
Applicable Standards ASTM B187/B187M, EN 13605 or agreed customer specification, depending on product form and manufacturing route
Cross-Section Inverted T-section with a horizontal base flange and an upright web
Base Flange Width Reference range: 15–220 mm
Overall Height Reference range: 15–200 mm
Flange / Web Thickness Reference range: 2–40 mm; dimensions specified separately
Top Edge Rounded top; radius or alternative edge geometry according to drawing
Cut Segment Length Reference range: 20–1000 mm
Profile Bar Length Reference range: 1000–6000 mm; subject to section and handling requirements
Supply Forms Profile bar, saw-cut blank or further-machined component
Material Condition Annealed or cold-worked condition as specified
Surface Options Bare copper, anti-tarnish treatment or silver, tin or nickel plating, subject to confirmation
Custom Machining Mounting holes, threads, slots, chamfers and finished functional faces
Tolerances According to the approved drawing and manufacturing feasibility review
Inspection Section dimensions, straightness, perpendicularity and surface condition; conductivity, hardness or additional testing as specified
Documentation Material test certificates, dimensional reports and process records as agreed

Product Detail

Product Tags

Video

Short Description

Custom T-section copper busbar featuring a rounded upright web and a horizontal base flange. Supply options include profile bars, cut-to-length blanks and further-machined components. Copper grade, section dimensions, temper, tolerances and optional plating are confirmed against your drawing and application requirements.

Product Overview

A T-section copper busbar combines an upright conductive web with a base flange extending to both sides. The rounded top provides an alternative to a sharp-edged blade profile, while the base offers space for mounting or further machining.

This profile can be evaluated for switchgear contact blanks, busway branch connections and other drawing-based electrical components. Final contact geometry, current capacity and assembly suitability depend on the complete equipment design.

Material selection can include C11000 electrolytic tough-pitch copper or oxygen-free copper grades, depending on electrical, thermal and processing requirements. Explore ourpure copper productsfor related conductor materials.

Key Features

  • Defined T-section geometry:Combines an upright web with a base flange for drawing-based conductor designs.
  • Rounded top edge:Radius can be specified to match the intended mating interface.
  • Flexible supply forms:Profile stock, cut blanks and machined parts can be reviewed.
  • Material options:ETP and oxygen-free copper grades can be selected according to application requirements.
  • Machining and plating options:Mounting features and surface treatments can be specified on the drawing.

Manufacturing & Quality Control

The manufacturing route and inspection plan are established around the section geometry, material condition and critical drawing requirements.

Stage Control Focus
Material Selection Confirm copper grade, applicable specification and required material documentation
Profile Forming Evaluate extrusion and drawing requirements against section geometry and temper
Straightening & Cutting Control straightness, cut length, end condition and handling distortion
Secondary Machining Produce specified holes, threads, slots and functional surfaces
Surface Treatment Confirm plating type, coverage, thickness and dimensional allowance where required
Final Inspection Verify agreed dimensions, geometric tolerances, surface condition and specified material properties

For section development, review ourcustom copper profile extrusionoptions. Additional holes and functional surfaces can be discussed through ourcopper machining support.

Inspection scope, acceptance criteria and documentation should be agreed before production. Visit ourQuality Assurancepage for further information.

Typical Applications

Potential Application Main Design Considerations
Switchgear stationary-contact blanks Contact dimensions, mating interface, temper and surface treatment
Busway branch or plug-in conductors Engagement geometry, connection resistance and temperature rise
Disconnector conductive components Contact loading, clearances and equipment qualification
Converter and rectifier connections Current path, cooling conditions and mounting arrangement
Custom electrical conductor assemblies Section geometry, fastening method and assembly tolerances

Application suitability must be confirmed through equipment-level design review and testing. The profile alone does not establish a current, voltage or short-circuit rating.

FAQ

Can this profile be supplied as a one-piece section?

A one-piece extrusion or drawing route can be evaluated. Feasibility depends on web thickness, flange width, section proportions, material condition and production quantity. The manufacturing route should be confirmed before ordering.

What is the purpose of the rounded top?

The rounded top defines the entry-edge geometry where the profile interfaces with another component. Its radius should match the mating design; it does not independently guarantee insertion performance, plating protection or electrical-field control.

What is a T-section copper busbar?

A T-section copper busbar is a shaped conductor with an upright web and a horizontal base flange. It can be supplied as profile stock or processed into drawing-based electrical components.

Which copper grades can be specified?

Common options include C11000 ETP copper and oxygen-free grades such as C10200 or C10100. The appropriate grade depends on conductivity, processing conditions and the applicable material specification.

Can you provide custom sizes and mounting holes?

Custom section dimensions, cut lengths, mounting holes, threads and slots can be reviewed against your drawing. Please identify functional surfaces and critical dimensions so the appropriate forming and machining sequence can be assessed.

What dimensional tolerances are available?

Tolerances depend on section size, temper, length and whether the feature is formed or machined. Specify requirements for web thickness, flange width, perpendicularity, flatness and straightness so feasibility and inspection methods can be confirmed.

Are silver, tin and nickel plating available?

These finishes can be discussed according to the application. Specify coating material, thickness, coverage and acceptance requirements. Selective plating and the effect of coating thickness on mating dimensions should also be reviewed.

Is this a finished, electrically rated switchgear contact?

Not automatically. The product may be supplied as profile stock, a contact blank or a machined component. Final suitability requires validation of the complete assembly, including contact pressure, temperature rise, insulation clearances and fault conditions.

Request a Quote

To request a quotation from Cymber Metal, please provide your 2D or 3D drawing, copper grade, applicable standard, section dimensions, cut length, temper, critical tolerances and quantity.

Include machining or plating requirements, operating conditions, inspection documents, destination and required delivery date. These details help us review the manufacturing route and prepare an accurate quotation.


  • Previous:
  • Next:

  • Write your message here and send it to us