Cold-Drawn Asymmetric Offset Inverted T-Section Pure Copper Profile Bar
Video
Short Description
Cymber Metal supplies cold-drawn asymmetric offset inverted T-section pure copper profile bars with a narrow positioning lip, a wider mounting flange and a central conductive boss.
The unequal-flange design can help control installation orientation in keyed slots, insulating bases, busway tracks and motor or generator assemblies. Profiles can be supplied in C11000, C10200, C10100, Cu-ETP, Cu-OF, T2, TU1 or TU2, with optional silver, tin or nickel plating according to the application.
Product Overview
This asymmetric pure copper profile is designed for assemblies where the two sides of the section must not be interchangeable. The narrow micro-lip can position the profile close to an enclosure edge, while the wider flange provides a larger clamping or retaining surface. The central square or rectangular boss remains the primary conductive section.
Typical uses include Poka-Yoke contact rails, keyed conductor bars, switchgear contact tracks, compact busway conductors, motor rotor slot wedges and custom locating busbars.
For standard copper grades and conductive products, see ourPure Copperproduct range. The asymmetric section can be reviewed throughCustom Copper Profile Extrusion, while cutting, drilling, tapping and other secondary operations can be discussed throughFine Machining.
All dimensions and performance values below are indicative enquiry ranges. Final values must be confirmed by the approved drawing, material grade and inspection method.
Key Features
| Feature | Buyer Value |
|---|---|
| Asymmetric Inverted T-Section | Creates a keyed geometry that helps prevent incorrect orientation during installation. |
| Narrow Positioning Lip | Allows the profile to fit close to an enclosure edge or restricted slot wall. |
| Wide Mounting Flange | Provides additional clamping, support and retaining area. |
| Central Conductive Boss | Maintains the primary current-carrying section without unnecessary holes or interruptions. |
| Poka-Yoke Geometry | The unequal sides can support one-way assembly and reduce the risk of reverse installation. |
| Cold-Drawn Surface | Supports consistent profile dimensions, straightness and surface quality. |
| High-Purity Copper Options | C11000, C10200 and C10100 can be reviewed for conductivity-focused designs. |
| Continuous Conductive Face | The profile can be supplied without a separate joined or brazed conductive strip. |
| Controlled Camber | In-line straightening can help maintain installation stability over the full bar length. |
| Custom Offset Design | Boss position, flange width, lip height and asymmetry can be developed according to drawing. |
| Flexible Supply Form | Available as cut segments, straight bars or coil where the section and temper permit. |
| Plating Compatibility | Silver, tin or nickel plating can be evaluated for contact and environmental requirements. |
Manufacturing & Quality Control
The manufacturing route is selected according to the unequal-flange geometry, boss size, straightness requirement, material grade, temper, quantity and surface-treatment requirement.
Manufacturing Process
| Process Stage | Manufacturing Control | Expected Output |
|---|---|---|
| Material Selection | Copper grade, purity, conductivity, temper and certificate requirements are reviewed. | Approved copper feedstock with traceable heat information |
| Casting | Upward continuous casting or another approved billet route is used according to grade. | Dense copper billet or feedstock |
| Continuous Extrusion | The billet is formed into a preliminary rectangular or T-related section. | Stable intermediate profile |
| Asymmetric Die Design | Differential bearing lengths control the narrow lip, central boss and wide flange. | Balanced metal flow through the unequal section |
| Multi-Pass Cold Drawing | Controlled reductions refine flange width, boss dimensions, surface finish and straightness. | Near-net asymmetric copper profile |
| In-Line Straightening | Orthogonal or multi-roll straightening controls camber and lateral bow. | Straight profile suitable for assembly or cutting |
| Heat Treatment | Hard-temper or annealed condition is selected according to the required application. | Specified hardness and workability |
| Cold Sawing | Precision saws cut the bar into finished lengths or segments. | Clean, square-cut components |
| Secondary Machining | Drilling, tapping, slotting, trimming and deburring are completed as required. | Assembly-ready conductive rail |
| Surface Treatment | Anti-tarnish, silver, tin or nickel treatment can be applied to selected surfaces. | Protected or contact-enhanced profile |
| Cleaning and Protection | Profiles are cleaned, dried and protected against oxidation. | Clean export-ready product |
| Packaging | Bars and cut pieces are separated to avoid scratches, dents and deformation. | Secure packaging for transport |
Asymmetric cold drawing can reduce the amount of machining compared with milling unequal flanges from solid bar. The actual material utilization, tooling requirement and cost benefit depend on the profile shape, production quantity and tolerance.
Quality Control System
| Inspection Item | Control Method | Documentation |
|---|---|---|
| Chemical Composition | Optical emission spectroscopy or an agreed material test method | Chemical analysis report / MTC |
| Heat Traceability | Heat number and batch records maintained through all stages | Material traceability record |
| Conductivity | Digital conductivity meter or agreed conductivity test method | Conductivity test data |
| Hardness | Vickers or another agreed hardness method | Hardness report |
| Flange Widths | Optical profile projector, CMM or dedicated gauges | Left/right flange inspection record |
| Boss Offset | CMM or optical profile measurement | Offset and center-position data |
| Root Radius | Optical measurement or CMM | Radius inspection record |
| Straightness and Camber | Granite surface plate, straightedge, laser or dedicated fixture | Full-length straightness report |
| Base Flatness | Granite surface plate, CMM or flatness gauge | Flatness inspection data |
| Surface Roughness | Profilometer measurement | Roughness report when required |
| Internal Soundness | Ultrasonic testing for thick or critical sections when specified | UT report |
| Plating Thickness | Coating-thickness measurement for silver, tin or nickel | Plating inspection report |
| Surface Condition | Visual inspection for cracks, burrs, scratches, oxidation and tool marks | Visual inspection checklist |
| First-Article Inspection | Full profile and dimensional inspection before batch production when required | FAI report |
| Shipment Documents | Documents supplied according to the purchase order | EN 10204 3.1 certificate and dimensional report when specified |
| Quality System | Production and inspection controls operated under the applicable ISO 9001 quality system | Records available throughQuality Assurance |
Typical Applications
| Application | Typical Use | Design Considerations |
|---|---|---|
| LV Circuit Breakers | Keyed stationary contact rails and conductive mounting profiles | Contact pressure, insulation clearance and installation orientation |
| MV Switchgear | Asymmetric contact tracks and conductor rails | Voltage class, creepage distance, heat rise and mechanical support |
| Disconnectors | Offset copper profiles for moving or stationary contact assemblies | Travel, alignment, contact force and environmental exposure |
| Contactors | One-way conductive rails and internal copper connection profiles | Switching duty, current, plating and electrical clearance |
| Sandwich Busways | Asymmetric conductor bars and sliding contact tracks | Slot geometry, thermal expansion and current distribution |
| Automated Sliding Contacts | Keyed copper rails for guided electrical movement | Rail straightness, friction, wear and contact pressure |
| Motor Rotor Slot Wedges | Eccentric copper slot wedges and retaining profiles | Rotor speed, vibration, retention and insulation interface |
| Generator Assemblies | Conductive locating bars and custom slot components | Mechanical loading, heat rise and dimensional stability |
| EV Power Distribution Units | Compact locating busbars and asymmetric connection profiles | Space, current rating, insulation and service access |
| EV Inverters | Custom copper conductor rails and mounting sections | Thermal cycling, vibration and plating requirements |
| Industrial Control Cabinets | One-way assembly rails and conductive support profiles | Mounting method, hole pattern and maintenance access |
FAQ
It is a copper profile with an inverted T-like section in which the two flanges are intentionally unequal. One side may have a narrow positioning lip while the other has a wider mounting flange, allowing the part to fit a keyed slot in only one orientation.
Common grades include C11000, C10200, C10100, Cu-ETP, Cu-OF, T2, TU1 and TU2. C10400/C10700 silver-bearing copper and C18150 CuCrZr may be reviewed for higher temperature or mechanical requirements.
The unequal flanges can provide orientation control, edge clearance and a larger clamping surface. This is useful for Poka-Yoke assemblies, insulating bases, busway tracks and motor or generator slot components.
Yes. The central conductive boss can be positioned symmetrically or eccentrically according to the drawing. Boss position, flange width, lip height and root radius should be defined as critical dimensions.
It can be evaluated for rotor or generator slot-wedge applications. The final design must be checked for rotor speed, vibration, centrifugal force, thermal expansion, insulation clearance and retention method.
An indicative target is approximately 0.2–0.3 mm per meter for full-length straightness or camber. The achievable value depends on profile size, temper, length, straightening route and inspection method.
Yes. Full or selective silver plating can be evaluated for contact surfaces. Plating thickness, coverage, adhesion and masking should be specified according to current, wear, temperature and environmental conditions.
Please provide the 2D/3D drawing, material grade, flange dimensions, boss position, length, tolerance, temper, surface treatment, quantity, application and required inspection documents.
Request a Quote
| Required Information | Details to Provide |
|---|---|
| Product Type | Asymmetric T-bar, keyed conductor rail, contact track, slot wedge or custom profile |
| Drawing | 2D drawing, 3D CAD file or dimensioned sketch |
| Copper Grade | C11000, C10200, C10100, T2, TU1, TU2 or another specified grade |
| Profile Geometry | Overall width, height, lip width, flange width, boss position and root radius |
| Length | Coil, bar length, cut segment or finished component length |
| Tolerance | Boss width, flange width, offset, flatness, straightness, camber and surface roughness |
| Temper | H02, H04, O60 or another specified condition |
| Surface | Bright copper, anti-tarnish, silver, tin, nickel or selective plating |
| Processing | Cutting, drilling, tapping, slotting, chamfering, deburring or marking |
| Application | Switchgear, contactor, busway, motor, generator, EV PDU or inverter |
| Electrical Requirement | Current, voltage, conductivity, temperature rise and duty cycle |
| Mechanical Requirement | Clamping force, vibration, sliding movement, retention or rotor speed |
| Quantity | Prototype, sample, trial order, batch quantity or annual demand |
| Inspection | MTC, conductivity, hardness, dimensional, straightness, plating or third-party inspection |
| Delivery Details | Destination country, packing requirements and target schedule |
| Contact | Contact Cymber Metal for an RFQ |









