Custom Stepped Pure Copper Busbar and Strip
Video
Short Description
Cymber Metal supplies custom stepped pure copper busbars and strips in single-step, double-step or multi-step sections. Grade, temper, dimensions, tolerance, surface finish and cut length are confirmed against the customer’s drawing and order requirements. Depending on the section and quantity, production may involve profile extrusion, rolling, drawing or machining, followed by cutting and optional plating.
Product Features
- Single-step, double-step and multi-step cross-sections made to drawing.
- Geometry can accommodate a height transition or half-lap joint where the assembly design requires it.
- Material grade and temper can be selected according to electrical, thermal and forming requirements.
- Supply can be reviewed as cut pieces, straight lengths or coils for suitable thin sections.
- Optional silver, tin or nickel plating is available subject to specification and process review.
- Dimensional requirements, including step geometry and flatness, are confirmed against the approved drawing.
Manufacturing Process & Quality Control
The production route is selected according to the profile, material, quantity and required condition. Not every process applies to every order.
| Stage | Process / Control |
|---|---|
| Drawing Review | Confirm profile, material grade, dimensions, critical tolerances and intended application |
| Material Selection | Review the specified copper grade and applicable product standard |
| Profile Forming | Extrusion, profile rolling, drawing or another suitable forming route, subject to technical review |
| Secondary Machining | Cutting or precision machining where needed; seefine machining services |
| Surface Treatment | Optional anti-tarnish treatment or plating as agreed |
| Inspection | Agreed checks may include material composition, dimensions, step profile, flatness and surface condition |
| Quality Records | Inspection scope and documentation confirmed with the order; seeQuality Assurance |
Typical Applications
Potential applications depend on the final design and engineering review:
- Switchgear and high-current busbar connections
- EV battery packs, inverters and power-conversion assemblies
- IGBT or SiC power-module interfaces and heat-spreading components
- Vacuum interrupters and electrical equipment
- Custom conductive interfaces and copper sections for industrial equipment
Frequently Asked Questions
A stepped copper busbar has a cross-section with two or more thickness levels. The geometry can help connect components at different heights or form an overlapping joint where the assembly design requires it. The appropriate section should be confirmed from the drawing.
Yes. Single-step, double-step and multi-step profiles can be reviewed against a drawing. Step height, width, corner geometry and flatness depend on the material, forming route and dimensions, so they should be confirmed before production.
The supplied product information lists C11000, C10200, C10100, CW004A, CW008A, T2, TU1 and TU2. Please specify the required grade and standard. Equivalency between designations should be confirmed from the applicable material specification and certificate.
Coil supply may be reviewed for suitable thin sections. Heavier or more rigid profiles are generally considered as straight lengths or cut pieces. The feasible supply form depends on section dimensions, temper, coil size and handling requirements.
The route is selected for the drawing and order. It may involve profile extrusion, rolling, drawing or machining, followed by cutting and optional surface treatment. The specific process should be confirmed after engineering review rather than assumed for every profile.
Plating can be discussed as an option. The plating type, coverage, thickness and applicable specification should be included in the drawing or order requirements, then confirmed for the profile and intended use.
Please provide the material grade and standard, cross-section drawing, dimensions, tolerance, temper, surface finish or plating requirement, quantity, application and required inspection documents. A 2D drawing or 3D model helps the team review manufacturing feasibility.
Inspection scope and documents depend on the agreed order specification. They may include material and dimensional records, with additional checks arranged when required. Please identify required tests or certificates when submitting the drawing so they can be reviewed before quotation.
Request a Quote
Please send your drawing or 3D model, material grade and standard, quantity, tolerance, surface treatment, application and documentation requirements for review.Contact Cymber Metalto discuss the suitable material and manufacturing route.










