Custom Special-Section Pure Copper Busbar
Video
Short Description
Cymber Metal supplies custom copper profile busbars with beveled, trapezoidal, wedge-shaped and other drawing-defined cross-sections. Thesepure copperprofiles can be supplied as straight lengths, cut blocks or semi-finished conductive components.
Profile width, height, angles, radii, temper, length and surface condition are confirmed from the approved cross-section drawing. Extrusion, cold drawing or CNC profile machining can be reviewed according to the geometry, tolerance, required properties and order quantity.
Key Features
- Drawing-defined cross-section with bevels, tapers, radii, steps or other functional geometry.
- Near-net profile options that can reduce downstream material removal.
- Pure-copper and selected copper-alloy grades for different conductivity, strength and wear requirements.
- Straight-length, cut-part and secondary-machined supply options.
- Optional protective treatment or selective/full plating according to the final application.
Manufacturing & Quality Control
| Stage | Scope |
|---|---|
| Profile and Application Review | Confirm the complete cross-section, datum system, conductor area, mating surfaces, tolerances, temper, length and annual quantity |
| Material and Route Selection | Select the grade and evaluate extrusion, cold drawing or CNC machining based on geometry, properties, tooling and production volume |
| Profile Production | Form or machine the specified bevels, tapers, steps and radii; useCNC machining supportfor secondary features and lower-volume complex sections |
| Cutting and Finishing | Cut to the agreed length, deburr edges and complete specified drilling, milling, bending, cleaning or plating operations |
| Final Inspection | Check the cross-section against the approved drawing, including key dimensions, angles, radii, straightness, twist and surface condition |
For inspection methods and available documentation, see ourQuality Assurancepage. Product-specific testing and acceptance criteria are confirmed before order placement.
Typical Applications
- Drawing-specific contact and conductor bars for switchgear and disconnectors.
- Commutator segments, rotor bars and other motor or generator conductor profiles.
- Special-section winding and connection bars for transformers and power equipment.
- Conductive inserts and contact rails for resistance-welding and industrial electrical systems.
- Custom wedge, guide or transition profiles requiring both electrical and mechanical functions.
Application suitability depends on current density, joint design, mechanical loading, wear, temperature rise and installation conditions. A beveled or trapezoidal shape does not by itself establish a particular current rating, switching function or corona-performance benefit.
Custom Copper Profile Busbar FAQ
It is a copper conductor whose cross-section differs from a standard flat rectangular busbar. The profile may include bevels, tapers, steps, radii, dovetails or other functional features. It is produced to a customer drawing for a specific electrical, mechanical or assembly interface.
Extrusion or cold drawing can be suitable for repeat lengths and stable cross-sections, while CNC profile machining may be more practical for prototypes, short parts or complex low-volume shapes. Some products use a combined route. The final method is selected after reviewing section geometry, temper, tolerances, quantity and tooling economics.
C11000, C10200 and C10100 can be reviewed for high-conductivity applications. Silver-bearing copper grades such as C10400, C10500 or C10700, and C18150 copper alloy, can be considered separately where strength, wear or elevated-temperature performance is important. Grade, standard and temper must be confirmed together.
Yes, subject to manufacturability review. Supply a dimensioned cross-section showing the width, height, angles, radii, corner conditions and datum points. Also identify contact surfaces and any features that must remain consistent along the complete length. Very thin ribs, sharp internal corners or strongly asymmetric profiles may need adjustment.
Tolerance capability depends on section size, asymmetry, temper, length and production route. Profile dimensions, bevel angle, straightness, twist and cut length should be specified separately. Blanket ±0.02 mm tolerances should not be applied to the entire product without a feature-level drawing and inspection agreement.
Straight bars and cut-to-length parts can be reviewed across the indicative size range. Coil supply is limited to profiles and tempers that can be coiled without unacceptable distortion or residual set. Specify the required delivery form, maximum package weight, straightening requirement and final processing method.
Yes. Cutting, drilling, milling, punching, bending and selective or full plating can be reviewed. Define hole locations, bend radii, contact areas, coating material, coating thickness and whether finished dimensions apply before or after plating. Secondary processing feasibility depends on the profile geometry and temper.
Material certificates, profile inspection reports and coating records can be agreed with the order. Conductivity, hardness, straightness, twist, surface roughness and third-party inspection require specified methods and acceptance limits. EN 10204 Type 3.1 or other certification must be confirmed before quotation.
Request a Quote
Contact Cymber Metalwith your cross-section drawing or CAD file, copper grade and temper, profile dimensions and tolerances, required length, annual quantity, straight-bar or cut-part requirement, secondary machining, plating, inspection documents, destination and target delivery date. Include the application, operating current, temperature limit and mating-contact details where relevant.









