Custom Copper Flag-Shaped Stationary Contact Post

Short Description:

Parameter Specification
Product type Custom copper electrical contact component
Working product name Flag-shaped or offset-paddle stationary contact post
Material Copper grade and material standard to be specified
Potential grade options Customer-specified; C11000 or C10200 may be reviewed if suitable
Visible geometry Offset flat end, cylindrical stem and flat mounting end
Mounting feature Hole shown; diameter, position and any thread details to drawing
Overall dimensions Drawing-defined
Critical tolerances Drawing-defined and subject to manufacturing review
Contact surface finish As specified for the mating interface
Surface treatment Unplated copper or an agreed plating option, subject to feasibility
Manufacturing route Selected after review of material, geometry, quantity and tolerance
Inspection documents Agreed according to order requirements

Product Detail

Product Tags

Video

Short Description

This custom copper stationary contact post features a cylindrical connecting section between two flat contact or mounting ends, including an offset paddle-shaped end and a mounting hole. Material grade, dimensions, tolerances, surface finish and any plating are defined by the customer’s drawing and application requirements.

Product Overview

The copper stationary contact post is a drawing-based electrical component for equipment designs that require an offset contact surface connected to a mounting base. The photos show a cylindrical stem between two flattened ends, with a visible mounting hole in one end. The exact interface, orientation and function of each feature should be confirmed against the equipment drawing.

The supplied product brief identifies pure copper as the intended material. The actual grade and applicable material standard should be specified for the order; C11000 or C10200 may be considered only when they meet the application requirements. Cymber Metal’sPure Copperrange is a starting point for discussing material options.

The component can be reviewed for CNC machining and other suitable production routes. The blank, machining sequence, whether a monoblock construction is appropriate, and any plating should be confirmed after drawing review. For a related overview offine machining, see Cymber Metal’s capability page.

Electrical performance depends on the confirmed copper grade, contact geometry, surface condition and operating design. No conductivity value, voltage rating, tolerance or standards compliance should be assumed from the product photos alone.

Features

Feature Description Specification Note
Offset paddle-shaped end Provides a flat contact or interface area in an offset position relative to the stem. Shape and orientation to drawing.
Cylindrical connecting section Connects the flattened ends and sets their relative spacing. Diameter, length and transition radii to drawing.
Mounting end with hole Provides a visible mounting feature on one flat end. Hole size, position and fit must be specified.
Copper construction The supplied brief identifies pure copper as the intended material. Grade and material certification requirements need confirmation.
Custom surface options Copper may be supplied with a specified surface condition or reviewed for plating. Coating type and working-area coverage to be agreed.
Drawing-based production Supports review of non-standard geometry and interface requirements. Feasibility depends on the drawing and order quantity.

Manufacturing Process

Step Process Control Focus
1 Drawing and application review Confirm equipment interface, contact faces, hole details, datum scheme and critical dimensions.
2 Material selection Confirm copper grade, standard, temper or condition, and required material documents.
3 Blank and route planning Select a suitable blank and production sequence based on geometry, quantity and tolerances.
4 Forming or CNC machining Machine or form the offset end, cylindrical section, mounting end and hole as required by the approved drawing.
5 Deburring and surface preparation Remove machining burrs and prepare specified contact and mounting surfaces.
6 Optional surface treatment Apply an agreed treatment only after confirming coating type, coverage and functional surfaces.
7 Final inspection Check agreed dimensions, hole features, surface condition and documentation before packing.

Cymber Metal’sCNC machining capabilitycan be considered during drawing review. A specific 5-axis process, forging route or monoblock construction should not be assumed until engineering confirms it for the part.

Manufacturing & Quality Control

Stage Quality-Control Focus Records or Requirements
Material review Verify the grade and standard specified for the order. Material documents as agreed.
First-piece review Compare critical interfaces and dimensions with the approved drawing. First-piece report if requested and agreed.
Dimensional inspection Check overall dimensions, stem geometry, hole size and position, and contact-face features. Inspection points and tolerances defined by drawing.
Surface inspection Review contact areas and edges for conditions that could affect assembly or mating. Surface requirements specified by the customer.
Optional plating review Confirm treatment type, coverage and any thickness or appearance requirements. Plating specification agreed before production.
Final inspection Confirm applicable order requirements and packing condition. Final inspection records according to the order.
Quality system Review Cymber Metal’sQuality Assuranceinformation. Product-specific inspection plans and documents must be confirmed for the order.

Typical Applications

Potential Application Possible Component Role Confirmation Required
Disconnector assemblies Stationary contact or offset contact post Verify mating blade geometry, travel and mounting interface with the equipment drawing.
Earthing-switch assemblies Conductive contact interface within a switch assembly Confirm electrical and mechanical duty with the equipment designer.
Medium-voltage switchgear Custom conductive post or contact component Confirm system design, applicable standards and operating conditions.
Ring main units (RMUs) Contact component in a disconnector or switching mechanism Validate the part against the specific RMU model and OEM requirements.

These are potential application areas based on the supplied brief, not a declaration of voltage rating, certification or suitability for a particular apparatus.

Frequently Asked Questions

What is a copper stationary contact post?

It is a conductive component intended to provide a fixed contact or connection point in an electrical assembly. This example has an offset flat end, a cylindrical connecting section and a mounting end. The exact function depends on how it interfaces with the customer’s switchgear or disconnector design.

Is this component made from pure copper?

The supplied product brief identifies pure copper, but the exact grade and standard are not confirmed by the photos. Specify the required grade and documentation in the RFQ. C11000 or C10200 can be reviewed as possible options if they are appropriate for the design and requirements.

Is it suitable for GIS or high-voltage switchgear?

The brief proposes GIS and switchgear applications, but the images alone cannot establish voltage rating or equipment compatibility. The buyer or OEM should confirm the contact geometry, electrical duty, insulation clearances, operating conditions and applicable standards before selection.

Can the part be made as a monoblock?

A monoblock construction may be considered if the drawing, material size and manufacturing route support it. The construction method should be confirmed during engineering review; it should not be inferred from the product photos alone.

Can Cymber Metal produce it by 5-axis CNC machining?

CNC machining can be reviewed for the shown custom geometry. Whether 5-axis machining is suitable or necessary depends on the drawing, datums, tolerances, quantity and production plan. Share the 2D or 3D file for a feasibility review.

What tolerances can be achieved?

Tolerances should be specified on the drawing and reviewed before quotation. Critical dimensions may include the mounting-hole position, stem dimensions, offset distance, contact-face geometry and the relationship between the mounting and mating surfaces.

Can the contact surfaces be silver-plated?

A plating option can be reviewed if required by the mating interface or equipment specification. The RFQ should identify the coating type, required areas, thickness if specified, and any masking or surface-finish requirements. Feasibility and inspection details need order confirmation.

What information is needed for a quotation?

Please provide the material grade and standard, 2D/3D drawing, critical tolerances, hole details, contact-surface requirements, finish or plating, quantity, inspection documents, destination and required schedule. Also identify the equipment or application so the interface can be reviewed.

RFQ Information

Information Needed Details to Provide
Material Copper grade, standard and condition
Drawing 2D drawing and, if available, 3D model
Dimensions Overall size, stem dimensions, offset and hole details
Critical features Contact surfaces, datums, fit and tolerances
Surface Natural copper finish or specified plating/coating
Quantity Prototype, initial order and expected recurring quantity
Quality documents Material documents, dimensional inspection or other requirements
Application Equipment type, mating component and relevant operating conditions
Delivery Destination, packing needs and target schedule

For a drawing review and quotation,contact Cymber Metal.


  • Previous:
  • Next:

  • Write your message here and send it to us