Multi-Bent Stepped Pure Copper Busbar Connector

Short Description:

Parameter Specification
Product type Custom copper busbar connector / transition terminal
Working product name Multi-bent stepped copper connector
Material Pure copper per supplied brief; exact grade and standard to be confirmed
Visible profile Multi-bent spatial offset with stepped sections
End feature Projecting flat tongue; mating details to drawing
Hole pattern Five-hole arrangement described in the brief; verify against drawing
Overall dimensions Drawing-defined
Bend angles and locations Drawing-defined
Critical tolerances Drawing-defined and subject to feasibility review
Surface finish As specified for the assembly
Plating options To be reviewed against the mating interface and order specification
Manufacturing route Selected after review of the drawing, quantity and tolerances
Inspection documents Agreed according to order requirements

Product Detail

Product Tags

Video

Short Description

This custom copper busbar connector features a multi-bent stepped profile, a projecting flat blade or tongue at one end, intermediate hole features and a two-hole mounting section. Copper grade, dimensions, bend geometry, tolerances and surface treatment are specified by the approved drawing and order requirements.

Product Overview

The multi-bent copper busbar connector is a custom conductive link designed around a stepped, three-dimensional profile. The photos show a narrow projecting blade at one end, a section with two smaller holes, a transition section with another hole, and a wider two-hole mounting end. The function of each feature should be confirmed against the equipment drawing.

The supplied product brief identifies pure copper as the intended material. The exact grade, temper and material standard should be confirmed for the order. Cymber Metal’sPure Copperrange is a starting point for reviewing material options.

The product brief proposes use in switchgear, circuit-breaker and power-distribution assemblies. These are potential applications only; compatibility depends on the mating parts, clearances, current and thermal requirements, and equipment design. The forming sequence, hole-making method and any plating should likewise be selected after drawing review.

Features

Feature Description Specification Note
Multi-bent profile Forms a spatial offset between the connector ends. Bend locations, angles and radii to drawing.
Stepped blade end A narrow, flat projecting section is visible at one end. Width, thickness, engagement length and edge condition to drawing.
Intermediate hole features Two smaller holes appear in the middle section. Confirm whether they are for mounting, sensing or another function.
Transition section An offset section connects the blade end to the mounting end. Hole and bend relationships to drawing.
Two-hole mounting end The wider end includes two visible mounting holes. Hole diameter, spacing and countersinks/chamfers to drawing.
Copper construction Pure copper is identified as the intended material in the supplied brief. Confirm grade, temper and required material documentation.

Manufacturing Process

Step Process Control Focus
1 Drawing and application review Confirm mating interfaces, hole functions, bend geometry, datums and critical dimensions.
2 Material selection Agree copper grade, standard, temper or condition, and material documentation.
3 Blank preparation Select and cut suitable copper stock based on the approved part geometry and order quantity.
4 Hole and contour production Produce the specified holes and end features using a suitable machining or fabrication sequence.
5 Controlled forming Form the offset and stepped sections using a route selected to suit the material and geometry.
6 Deburring and surface preparation Remove burrs and prepare specified contact and mounting surfaces.
7 Optional surface treatment Apply an agreed finish or plating if required and confirmed as feasible.
8 Final inspection Check drawing-defined dimensions, hole positions, formed profile and surface condition.

Cymber Metal’sfine machiningandCNC machined parts capabilitycan be reviewed during process planning. The exact forming equipment, drilling sequence and plating route should be confirmed for the approved drawing.

Manufacturing & Quality Control

Stage Quality-Control Focus Records or Requirements
Material review Confirm the copper grade and standard specified for the order. Material documents as agreed.
First-piece review Compare the formed component with the approved drawing and assembly interfaces. First-piece inspection if requested and agreed.
Dimensional inspection Check overall dimensions, hole sizes and positions, and specified section features. Inspection points and tolerances defined by drawing.
Formed-profile inspection Review bend angles, offsets and end-to-end alignment. Measurement method and acceptance limits agreed before production.
Surface inspection Review specified contact areas, edges and formed surfaces. Surface requirements provided by the customer.
Plating review If plating is required, confirm type, coverage and any specified thickness. Plating requirements agreed before production.
Final inspection Verify applicable order requirements and packing condition. Final inspection records according to the order.
Quality information See Cymber Metal’sQuality Assurancepage. Product-specific inspection scope and documents must be confirmed for the order.

Typical Applications

Potential Application Possible Component Role Confirmation Required
Withdrawable switchgear Transition connector between equipment terminals and busbar sections Confirm insertion interface, clearances and mounting details.
Air circuit breakers Offset connection within a breaker or switchgear assembly Verify equipment model, electrical duty and mating surfaces.
Molded-case circuit breakers Compact transition link or terminal connection Confirm design compatibility and applicable requirements.
Energy-storage converters Interconnection within a power-conversion assembly Confirm current, thermal conditions and system layout.
Industrial inverters and UPS equipment Custom internal copper connection Verify hole pattern, insulation clearances and operating conditions.

These are application areas proposed in the supplied brief, not a declaration of voltage rating, certification or suitability for a specific system.

Frequently Asked Questions

What is a multi-bent copper busbar connector?

It is a copper electrical connector formed with multiple bends to connect points at different heights or positions. This product has a stepped profile, a projecting flat end and multiple hole features. Its exact function depends on the customer’s equipment and assembly design.

Is this connector made from pure copper?

The supplied product brief identifies pure copper as the intended material, but it does not establish the exact grade, temper or standard. Include those requirements in the RFQ so the material can be reviewed before production.

Does the part have five holes?

The brief describes a five-hole arrangement, and the photographs show several hole features. Confirm the exact count, diameters, positions and any countersinks or chamfers from the approved drawing before releasing production.

What is the projecting blade or tongue used for?

The photos show a narrow flat projection at one end, and the brief describes it as a plug-in blade. Its engagement function and mating geometry should be confirmed with the equipment drawing or mating-part specification.

Can the connector be made from one piece of copper?

A one-piece design may be evaluated, but the photos alone do not confirm its construction method. Feasibility depends on the approved geometry, material form, forming sequence, quantity and required tolerances.

Can the connector be plated?

A plating option can be reviewed if required by the mating interface or equipment specification. The RFQ should state the coating type, coverage, thickness if specified, and any masking requirements. Feasibility and inspection criteria should be agreed before production.

What tolerances can be achieved on the bends and holes?

Bend-angle, hole-position and overall-span tolerances should be specified on the drawing and reviewed before quotation. The acceptance method should also be agreed, especially where the connector must fit a specific assembly without forcing or rework.

What information is needed for a quotation?

Provide the material grade and standard, 2D/3D drawing, bend angles and radii, hole details, critical tolerances, surface finish or plating, quantity, inspection documents, destination and target schedule. Include the equipment type and mating-part details if available.

RFQ Information

Information Needed Details to Provide
Material Copper grade, standard and condition
Drawing 2D drawing and, if available, 3D model
Geometry Developed length, section widths, thickness, bend angles and radii
Hole details Hole count, diameter, position, countersink or chamfer details
Critical interfaces Blade engagement dimensions, mounting faces and datums
Surface Copper finish or specified plating/coating
Quantity Prototype, initial order and expected recurring quantity
Quality documents Material records, dimensional inspection or other requirements
Application Equipment type, mating parts and operating conditions
Delivery Destination, packing requirements and target schedule

For drawing review and quotation,contact Cymber Metal.


  • Previous:
  • Next:

  • Write your message here and send it to us