Custom Copper Bushing Stem with Two-Hole Flat Palm
Video
Short Description
This copper bushing stem has a cylindrical base connected to a flat terminal palm. The supplied images show a threaded cylindrical section, a circular end opening and two through-holes in the flat palm.
Material grade, thread details, dimensions, finish and tolerances should be confirmed against the drawing and order specification. The supplied brief lists C10200, C10100 and C11000 among possible materials; confirm the selected grade before ordering.
Product Overview
A copper bushing stem is a conductor component that combines a cylindrical mounting interface with a flat connection palm. The pictured part has two holes through the palm and a threaded cylindrical base. Sealing features, application voltage and equipment compatibility must be verified from the product drawing and system requirements.
For material options, see ourPure Copperrange.
Key Features
- Cylindrical base joined to a flat terminal palm.
- Two-hole palm arrangement is visible in the supplied images.
- Thread, end opening, hole spacing and palm dimensions can be specified by drawing.
- Copper grade and any plating requirement should be defined in the purchase specification.
- Sealing and wall-bushing functions depend on the confirmed interface design.
- Electrical ratings and compliance must be assessed for the complete equipment assembly.
Manufacturing Process
| Stage | Description |
|---|---|
| Drawing and material review | Confirm grade, standard, dimensions, thread and hole requirements |
| Stock and process planning | Review a suitable copper stock form and manufacturing route |
| Cylindrical machining | Produce the stem, base, thread and specified end opening |
| Palm machining | Mill the flat connection faces and drill the specified mounting holes |
| Deburring and cleaning | Define edge condition and cleanliness requirements |
| Optional surface treatment | Review plating requirements for the chosen material and application |
| Final inspection and packing | Inspect to the agreed plan and protect threads and machined faces |
Custom machining requirements can be reviewed through ourFine Machiningpage.
Manufacturing & Quality Control
| Control Point | Order-Level Check |
|---|---|
| Material identity | Confirm grade and supporting material documents |
| Cylindrical base | Inspect diameter, thread and end opening against the drawing |
| Terminal palm | Check thickness, flatness and dimensions to agreed criteria |
| Hole pattern | Verify hole diameter, spacing, position and chamfer requirements |
| Surface condition | Review machined faces and any specified coating |
| Functional testing | Define any electrical, fit or sealing test requirements before production |
| Documentation | Agree material certificates and inspection records for the shipment |
For inspection methods and available documentation, see ourQuality Assurancepage. Product-specific testing and acceptance criteria are confirmed before order placement.
Typical Applications
| Application | Potential Use |
|---|---|
| Electrical bushings | Conductor stem for a compatible insulating bushing design |
| GIS or switchgear assemblies | Terminal component where the specified threaded base and palm interface match |
| Transformer connections | Terminal or conductor stem in an assembly designed for the geometry |
| Power-distribution equipment | Flat-palm connection to a busbar or conductor, subject to system design |
| Custom electrical equipment | Drawing-specific conductor component |
Application suitability, sealing performance, voltage and current ratings, and standards compliance require confirmation for the complete equipment design.
FAQ
It is a conductor component with a cylindrical mounting section and a terminal interface. This pictured version has a flat palm with two holes, but the exact function depends on how it connects to the bushing or equipment.
The supplied brief lists C10200, C10100 and C11000, among other designations. Confirm the exact grade and governing standard; similar designations should not be assumed interchangeable.
The brief gives reference ranges for overall length, flange diameter, stem diameter and palm thickness. These are not guaranteed standard sizes. Submit the drawing for dimensional and manufacturing review.
Yes. Specify the thread standard, diameter, pitch, fit and engagement length, along with palm-hole diameter, spacing and chamfer requirements on the drawing.
The product brief mentions an O-ring groove, but the images do not clearly establish that feature. Confirm it on the drawing and specify the seal dimensions and interface requirements if required.
The photos show bright metallic surfaces but cannot confirm the material or coating. State the required base material and finish in the inquiry.
The supplied brief references IEC 60137, but no product-specific compliance evidence was provided. State the applicable standard and acceptance requirements; confirm suitability at the bushing or equipment level.
Provide the material grade and standard, drawing, overall dimensions, thread specification, palm-hole pattern, finish, quantity, inspection documents and delivery destination.
Request a Quote
| Information Needed | Details to Provide |
|---|---|
| Material | Grade and applicable standard |
| Drawing | 2D/3D drawing with critical dimensions and tolerances |
| Base | Thread type, pitch, fit, flange and end-opening details |
| Terminal palm | Thickness, hole diameters, spacing and chamfers |
| Finish | Bare copper or specified plating |
| Quantity | Order quantity and sample requirement |
| Quality documents | Material certificate, inspection plan and required tests |
| Delivery | Destination, packing needs and target schedule |
Send the drawing and requirements throughContact Usfor review.









