Custom 3-Way Copper Busbar Bracket with Split-Bent Tab

Short Description:

Parameter Specification / Customization Basis
Product Type Custom formed copper busbar bracket / conductive connection bracket
Cross-Section and Layout Three-plane configuration with drilled flanges and a split-bent tab
Material Specified copper grade, subject to application requirements and supply confirmation
Material Temper Selected to suit forming requirements and final mechanical properties
Manufacturing Route Blank preparation, relief cutting, forming and machining as required by the drawing
Flange Geometry Width, length, end radius and orientation customized
Tab Geometry Rounded, hole-free tab; dimensions and function defined by the assembly drawing
Hole Configuration Through-holes, counterbores and other approved machined features
Counterbore Design Diameter and depth specified for fastener seating, remaining section and tool access
Thickness Drawing-based; reviewed against bend radius, hole geometry and connection requirements
Bend Requirements Bend radius, angle, relief geometry and springback allowance reviewed before production
Dimensional Tolerances Defined on the approved drawing; critical dimensions reviewed individually
Electrical Conductivity Dependent on the selected grade and material condition; testing agreed when required
Surface Finish Unplated or specified plating, subject to application and process confirmation
Current / Voltage Rating Determined and validated at equipment level
Supply Condition Formed components or finished machined parts according to the agreed scope

Product Detail

Product Tags

Video

Short Description

Custom copper busbar bracket featuring two drilled flanges and a rounded, hole-free tab arranged across three planes. The illustrated design combines plain through-holes, stepped counterbores and relief cutouts for a compact connection layout. Copper grade, temper, thickness, bend geometry, hole positions and surface finish are specified against the approved drawing and assembly requirements.

Product Overview

This copper busbar bracket is a formed conductive component for power assemblies requiring connections or functional surfaces in different directions. Its geometry includes two main flanges with paired holes and a rounded tab extending into a third plane.

The pictured configuration has plain through-holes on one flange and cylindrical counterbores on another. Narrow relief cutouts separate the tab from adjacent material, allowing the forming layout to be engineered around the required assembly geometry.

Material selection begins with the specifiedPure Coppergrade and temper. Bendability, final dimensions, remaining material around holes and electrical connection requirements are reviewed together before the manufacturing route is confirmed.

“3-way” describes the component’s geometry. It does not mean three electrically isolated phases. A continuous copper bracket is electrically connected throughout and must be installed with the required insulation and clearances.

Key Features

Feature Design Relevance
Three-Plane Geometry Provides differently oriented connection or functional surfaces within a compact assembly.
Split-Bent Rounded Tab Adds a third-plane feature whose role can be defined as locating, guiding or contacting by the equipment drawing.
Mixed Hole Features Allows plain bolt clearance and recessed fastener seating within the same component.
Relief Cutouts Provide forming separation around the tab; slot ends and remaining section require engineering review.
Rounded Ends and Edges Support handling and assembly requirements without establishing any particular voltage rating.
Drawing-Based Configuration Allows hole positions, flange offsets and bend geometry to match the mating assembly.

Manufacturing Process

The following is a typical planning sequence. The final route and operation order depend on material condition, geometry and inspection requirements.

Stage Manufacturing Activity Main Consideration
1. Drawing Review Review connection faces, datums, bends, holes and mating hardware. Identify dimensions that must be controlled after forming.
2. Material Selection Confirm copper grade, temper, thickness and documentation requirements. Balance forming suitability with final application requirements.
3. Blank and Relief Preparation Prepare the blank, outer contour and relief cutouts. Maintain suitable material around bend roots, slots and holes.
4. Controlled Forming Form the main flanges and tab in a planned sequence. Manage bend radius, tool access, springback and feature interference.
5. Feature Finishing Drill, ream, counterbore or finish-machine features where required. Post-forming machining may be selected for critical spatial relationships.
6. Surface Preparation and Inspection Deburr, clean, apply the specified finish and inspect agreed characteristics. Protect contact surfaces and verify final acceptance requirements.

For critical holes and mating features, theFine Machiningscope can be reviewed alongside the forming plan. Where plating is specified, finish requirements can be discussed through theBusbar Plating Shop.

Manufacturing & Quality Control

Control Area Inspection / Review Acceptance Basis
Drawing and Revision Confirm part revision, datums and critical characteristics. Approved drawing and purchase order
Material Identification Review the ordered grade, temper and available material documentation. Agreed material specification
Blank and Relief Geometry Check contours, cutouts, slot ends and remaining material. Drawing dimensions and edge requirements
Formed Geometry Check bend angles, flange orientation, tab position and relevant offsets. Specified geometric and dimensional tolerances
Bend-Root Condition Examine accessible bend roots and relief areas for visible defects. Agreed visual criteria; additional testing when specified
Hole and Counterbore Features Check hole size, location, counterbore diameter and depth. Approved hole and fastener requirements
Contact and Surface Condition Check burrs, cleanliness and specified contact-face condition. Agreed surface requirements
Plating, When Ordered Verify the specified finish using the agreed inspection method. Order-specific plating requirements
Final Release and Packing Confirm completed checks and suitable surface protection for shipment. Agreed inspection and packaging plan

Inspection scope, sampling and documentation should be agreed before production. SeeQuality Assurancefor Cymber Metal’s quality-related information.

Typical Applications

Application Potential Function Required Design Review
Switchgear Assemblies Conductive corner connection between differently oriented busbar or terminal faces Clearances, joint arrangement, support and temperature rise
Ring Main Units Compact formed connection within a drawing-defined conductor layout Equipment geometry, insulation coordination and assembly access
Circuit-Breaker Assemblies Terminal connection or conductive bracket within an approved design Contact interfaces, bolt loading and operating clearances
Energy-Storage PCS and Renewable-Energy Converters Custom connection between power modules, terminals and busbars Continuous current, thermal conditions and fault loading
Rectifier Cabinets and Industrial Power Equipment Formed current-carrying connection around equipment constraints Joint resistance, vibration, cooling and maintenance access

These are potential applications, not equipment approvals or electrical ratings.

Frequently Asked Questions

What is a copper busbar bracket used for?

A copper busbar bracket provides a conductive connection or functional mounting interface in a power assembly. This design places two drilled flanges and a rounded tab in different planes to suit a custom equipment layout.

Does “3-way” mean it connects three electrical phases?

No. Here, “3-way” describes three-plane geometry. A continuous copper component is one electrically connected part and must not bridge separate phases unless the equipment design specifically requires that electrical connection.

Can this bracket be formed from one copper blank?

A split-and-bend layout can produce this type of geometry from one blank. Feasibility depends on thickness, temper, bend radii, relief geometry and tooling access; the route must be confirmed during drawing review.

Which copper grade should be specified?

The grade should follow the application’s electrical, forming and joining requirements. C11000 or an oxygen-free grade such as C10200 may be considered where appropriate, but the exact grade, temper and supply specification must be confirmed before ordering.

Why does the bracket include counterbored holes?

Counterbores provide cylindrical recesses for specified bolt heads or other hardware. Their diameter and depth must account for fastener seating, tool access and the copper remaining beneath the recess.

Can hole positions be controlled after bending?

Yes, a manufacturing plan can include post-forming hole finishing where required. Achievable tolerances depend on the part geometry, datums, tooling and inspection method and should be reviewed against the drawing.

How is the bracket’s current capacity determined?

Current capacity depends on the copper grade, minimum conductor section, joint resistance, cooling, enclosure conditions and allowable temperature rise. Holes, slots and bends must be included in the assessment; a photograph alone cannot establish a rating.

Can the bracket be supplied with plating?

An unplated or specified plated finish can be evaluated for the application. The order should identify the plating material, thickness, coverage, masking requirements and inspection criteria, with critical dimensions considered in the finished condition.

RFQ Information

Information Required Details to Provide
Drawing and Revision Dimensioned PDF and available STEP or other 3D model
Copper Specification Required grade, temper and applicable material standard
Main Dimensions Thickness, flange sizes, tab dimensions and offsets
Bend Requirements Bend angles, internal radii and critical formed relationships
Hole Details Diameters, positions, counterbore sizes and depths
Critical Tolerances Datums, contact-face requirements and assembly-critical dimensions
Electrical Conditions Operating current, temperature-rise limits and relevant fault-loading requirements
Mating Hardware Bolt heads, washers, tightening requirements and access limitations
Surface Finish Unplated or specified plating, including masking requirements
Order and Documentation Quantity, delivery requirements, inspection records and material documents

Send your drawing, material specification and required quantity throughContact Usfor a manufacturing review and quotation.


  • Previous:
  • Next:

  • Write your message here and send it to us